Special
|
- CLICK FOR PICTURE
- LNC-93692 LINCOLN 7-TON AIR OPERATED END LIFT- $2999.00
- Wide heavy duty base provides excellent stability and strength. 6" spring loaded front caster permits full mobility. Handles the big truck and bus jobs in maintenance garages and truck repair shops. Low height 13-1/2", high height 58-1/2", saddle spread 29" - 47", operating PSI 200 max, weight 586 lbs.
- OTC-1590 OTC 10-TON AIR LIFT- $3,269.00
- Easy to maneuver with pneumatic tires and 2 large swivel casters. Has a 10-ton lifting capacity (at 200 psi). Complete air operation for low maintenance and long life. Has an automatic mechanical safety catch and five Height positions. There are two fittings on the air control valve. One for quick connect to the air supply, the other for a schrader valve. Lifting range is 13"-41". Saddle width is 32"-41". Weight 697 lbs.
- ATD-7228B ATD 3/4-TON HYDRAULIC WHEEL DOLLY- $637.00
- Welded steel construction, tilt frame allows easy positioning of wheels. steel wheel roller bearing casters for stability. 3/4 tom capacity. 31" length, 43" width, 34" height, 26" lift arm length, 25" lift arm spread. 9-1/4" lift, 4-3/4" ram. weight 112 lbs.
- LNC-93765 LINCOLN 3/4-TON HYDRAULIC WHEEL DOLLY- $999.00
- Designed for ease removal, installation and handling of dual and large single wheels. Handles wheels and tires up to 52" diameter. Lift range 2-3/8" - 7-7/8". Arm length 23". Arm spread 24". Length 37-1/2". Weight 119 lbs.
- OTC-1770A 3/4-TON HYDRAULIC WHEEL DOLLY- $1000.00
- Allows one man to replace dual wheels with ease. Up to 1,500 lb. capacity with a 4 degree tilt adjustment. Hydraulic jacking mechanism for a 4-3/4 lift. 6' chain included.
- Back To The Top Of The Page
HYDRAULIC END LIFTS AND WHEEL DOLLIES
- CLICK FOR PICTURE
- ATD-7202 3/4-TON BREAKDOWN MOBILE ENGINE CRANE- $648.80
- Breaks down in seconds to 23" x 32" area for easy storage. Use upper position for standard engine removal, use lower position for side engine removal on vans. Features 4 boom positions(600-1500 lbs.) and six heavy-duty swivel casters. Maximum height 96-3/4", low height 21", 227 lbs.
- ATD-7205A ATD 2-TON MOBILE ENGINE CRANE- $601.30
- Extendable boom with lock nut. Extendable front legs with lock nut. 3 ton long ram jack. 31-3/4" base width, 89" extended base length. 30-1/2" low height boom position, 96" high height boom position. 3 ton power unit. Weight 226 lbs.
- ATD-7210A ATD 1,000 LB. CAPACITY ENGINE STAND- $200.75
- Sturdy, tubular steel for strength, multi-position locking mount, adjustable locking mechanism allows 360 degrees rotation of engine. 1,000 lb. capacity. 4 casters, 32-1/2" length, 28-1/2" width, 38" height. Weight 59 lbs.
- ATD-7215 ATD 1,250 LB. CAPACITY ENGINE STAND- $223.00
- U-shaped design provides added stability. Adjustable locking mechanism allows 360 degrees rotation of engine. Built-in tool tray, 4 casters with lockable rear casters. 1,250 lb. capacity. 38" length, 34-1/4" width, 36" height. Weight 86 lbs.
- ATD-7485 2 TON FOLDING HYDRAULIC ENGINE CRANE
- ATD-7484 2 TON HYDRAULIC ENGINE CRANE
- Back To The Top Of The Page
ENGINE CRANES AND ENGINE STANDS
- CLICK FOR PICTURE
- ATD-7220 ATD 12 TON HYDRAULIC PRESS- $470.95
- All welded steel construction, heavy duty return springs for fast ram retraction, reinforced head plate. 12 ton hydraulic power unit. 61-3/4" height, 24" base width, 5" stroke. Bed plated included. Weight 190 lbs.
- OTC-1823 OTC 12 TON BOTTLE JACK PRESS- $845.00
- This economy press will handle most pressing, straightening or bending jobs including most removal and installation of gears, bearings and bushings. This unit has a hydraulic 5-7/8" stroke; has width of 28-3/4" and height of 84-1/2". Weight 221 lbs.
- ATD-7225 ATD 20-TON HYDRAULIC PRESS- $601.35
- All welded construction, heavy duty return springs for fast ram retraction, reinforced head plate. Bed plates included as standard equipment. 20 ton hydraulic power unit. 67" height, 32" base width, 7" stroke. Weight 265 lbs.
- OTC-1824 OTC 20-TON BOTTLE JACK PRESS- $1075.00
- This press has power to spare. It will do just about every press job needed in a garage including removing and installing bearings and gears. This press has a hydraulic stroke of 6-5/8"; has a base width of 37-1/2" and a height of 85-7/8". It weighs 357 lbs.
- Back To The Top Of The Page
HYDRAULIC SHOP PRESSES
- CLICK FOR PICTURE
- ATD-7529 ATD 3/4 TON ADJUSTABLE ENGINE SLING- $94.55
- Makes engine removal or installation faster and easier. Can be used with shop crane or hoist. 1500 lb. capacity will handle most passenger cars and small engines.
- ATD-7530 ATD ENGINE LIFTING SLING- $19.30
- Ideal for engine removal or installation. Working load limit 1250 lbs. Bolts to motor mounting holes.
- OTC HEAVY DUTY ADJUSTABLE LIFTING SLINGS
- When it comes to lifting and positioning such things as engines or transmissions, these lifting slings are the answer. Two slings, with chain, are available in either 2,000 lb. or 4,000 lb. Those capacities makes the slings ideal for working on car and truck components. The chains can be lengthened or shortened independently; that lets you put the load in almost any position you want. When used with a crane or hoist, lifting in a confined area posses fewer problems because the chain can be hooked as short as is necessary.
- OTC-7100 OTC 4,000 LB. CAPACITY LIFTING BRACKETS(One Pair)- $29.75
- Finding a location to attach a lifting chain onto an engine, transmission, etc, can sometimes be a challenge. The large chain link on each bracket mounts directly to the transmission or engine. The 4,000 lb. capacity makes them ideal for use with lifting slings or with other load positioning slings.
- OTC-1805 OTC 1-TON LOAD-ROTOR POSITIONING SLINGS- $362.00
- Used with a crane or hoist (Load-Rotor) slings greatly reduce job time. A self locking worm-and-gear set in the sling's head permits rapid adjustment of the angle of the component being handled. The component is tilted or leveled by merely turning the sling's 5/8" hex drive end with a common speed handle and socket. Has 1/4" high test chain, 56-1/2" in length, with forged swiveling safety hooks on each end. Mounting bracket also included. Gear ratio 34:1. Lifting eye has1-1/4" opening. Weight 11-13/16 lbs.
- Back To The Top Of The Page
ENGINE SLINGS
- ATD-7000 400 LB. CAPACITY HAND TRUCK- $73.29
- For bigger loads. Features a 7-1/4" x 14" nose plate to handle bulky jobs. Rolls easily on 5" x 1-3/4" wheels. Single handle foe easy handling. Weight 21 lbs.
- ATD-7002 ATD 600 LB. CAPACITY HAND TRUCK- $135.00
- Ideal for truck loading and unloading, moving drums, trash collection, etc. Loop handle for safe use. Rolls easily on big 10" x 2-3/4" semi-pneumatic ball bearing wheels. Maneuvers over door sills and other floor obstructions. Nose plate 7-1/2" x 14". Height 47-3/4". Weight 36 lbs.
- ATD-7003 ATD 600 LB. CAPACITY HAND TRUCK- $132.85
- Features a large 7-1/2" x 14" nose plate to handle bulky jobs. Rolls easily on 10" x 2-3/4" solid rubber tires and ball bearing wheels. Handles are high and wide for easy handling. Height 45-1/4". Weight 36 lbs.
- Back To The Top Of The Page
HAND TRUCKS
- CLICK FOR PICTURE
- ATD-7532 ATD 2,500 LB. CAPACITY REMOTE CONTROL ELECTRIC WINCH- $436.40
- Features include power reverse and self-locking gearbox that allows hundreds of winching and hoisting jobs. Circuit breaker assembly protects winch and vehicle battery from overload. Emergency handcrank and handsaver bar included. Forceful brakes stop and hold the load when switch is off. Winch comes complete with pulley block and hook assembly remote control kit cable guide. The design permits mounting in almost any position. Also features mounted switch with 5 foot leads. 1,500 lbs./680 kg. working load single line 2,500 lbs./1134 kg. stall single line. 12 volt DC, 1.3 hp, 4,200 lbs. breaking strength, weight 16 lbs.
- ATD-7535 ATD-2500 LB. CAPACITY ELECTRIC WINCH- $407.82
- Same as model ATD_7532 without remote control kit but dose include 24' power harness so this can be mounted on rear of vehicle.
- Back To The Top Of The Page
ELECTRIC WINCHES
- CLICK FOR PICTURE
- ATD POWER PULLS
- ATD pullers feature hardened steel pivot points, swivel yoke, cadmium plated steel frame and cable guard, high alloy aluminum ratchet wheel, notch-at-a-time automatic safety release, slip hook and durable plastic hand grips.
- ATD-7502($60.45) 18:1 leverage, 6' lift, 2:1 safety factor, 1 cap. tons, 6-1/4 lbs.
- ATD-7504($60.20) 18:1 leverage, 12' lift, 2:1 safety factor, 1 cap. tons, 6-3/4 lbs.
- ATD-7505($75.05) 36:1 leverage, 6' lift, 2:1 safety factor, 2 cap. tons, 8-1/4 lbs.
- ATD CHAIN PULLERS
- This versitel line of chain pullers features 3/4 - 3 ton capacity models. All mechanisms are completely enclosed for protection from outdoor elements. Chains can be easily pulled by hand in either direction for fast, easy attachment to the job.
- ATD-7506($342.55) 3/4 ton capacity, 5' lift, 44 lb. pull lever. Minimum distance between hooks is 11-27/64". Weight 17-1/2 lbs.
- ATD-7508($536.95) 1-1/2 ton capacity, 5' lift, 48-1/2 lb. pull lever. Minimum distance between hook is 14-11/64". Weight 28-1/2 lbs.
- ATD-7509($698.54) 3 ton capacity, 5' lift, 74.8 lb. pull lever. Minimum distance between hooks is 18-1/2". Weight 50 lbs.
- ATD ECONOMY PULLERS
- These pullers are constructed with a laminated ratchet wheel which greatly reduces cost without diminishing quality or function. Uses 3/16" galvanized aircraft cable.
- ATD-7498($35.19) 18:1 leverage, 12' lift, 2:1 safety factor, 1 cap. tons, 6-3/4 lbs.
- ATD-7499($40.25) 36:1 leverage, 6' lift, 2:1 safety factor, 2 cap. tons, 8-1/4 lbs.
- ATD-7539 ATD 1-TON CHAIN BLOCK- $364.59
- 2000 lb capacity. Standard 10 ft. lift. Heat treated to assure many years of service. Fully warranted for one year. Minimum distance between hooks 11-27/64". Weight 27-1/2 lbs.
- ATD-7540 ATD 2-TON CHAIN BLOCK- $467.00
- 4000 lb capacity. Standard 10 ft. lift. For lifting, raising and lowering. Minimum distance between hooks 14-61/64 ". Weight 56 lbs.
- ATD LOAD BINDERS
- Forged from high quality Boron steel to provide strength, service and dependability. The handle and components are carefully balanced for easily handling. Ball and socket construction provides flexibility and straight line pull on the load. Special hook construction supports the load chain and will not bind.
- ATD-7492($31.89) 7,800 lbs. average breaking strength, 1/4" max. chain size, 2-1/2" take up.
- ATD-7493($49.59) 19,000 lbs. average breaking strength, 3/8" max. chain size, 4" take up.
- Back To The Top Of The Page
