|
Welder Special
- ATD-37001 130 AMP, 120 VOLT MIG WELDER
- Gas regulator. Rollers .023 - .030"- .solid. Hand held welding mask. Tweeco style (swan neck nozzle) & contact tips. Manual in English, French, Spanish. 2 lb. starter roll of .023" wire. Use with gas . Tweeco style neck & nozzle & tips. 4 heat settings. Infinite wire speed dial. Optional cart available.
- ATD-37155 AMP, 230 VOLT MIG WELDER
- Gas regulator. Rollers .023 - .030" - .035 flux cord. Hand held welding mask. Wire brush & chipping hammer Tweeco style (swan neck nozzle) & contact tips. Manual in English, French, Spanish. 2 lb. starter roll of .023" wire. Use with gas or no gas. Professional drive - built to last. Tweeco style neck & nozzle & tips. 7 heat settings. Infinite wire speed dial. Optional cart available (ATD-7040).
- ATD-37130 135 AMP, 120 VOLT MIG WELDER
- Gas regulator. Rollers .023 - .030" - .035 flux cord. Hand held welding mask. Wire brush & chipping hammer Tweeco style (swan neck nozzle) & contact tips. Manual in English, French, Spanish. 2 lb. starter roll of .023" wire. Use with gas or no gas. Professional drive - built to last. Tweeco style neck & nozzle & tips. 7 heat settings. Infinite wire speed dial
- SOL-2160 SOLAR 130 AMP MIG WELDER
- This unit is designed for the professional body shop. It welds from 26 gauge metal to thick 5/16" steel. The W/R speed from 0 to 700 inches per minute is controlled by trigger. This will weld aluminum. It handles wire spools sizes 4", 8", nad 12" in W/R sizes .024", .030",.035" and optional .045". The quick release system allows fast and easy wire change. UL listed and CSA certified.
- SOL-2225 SOLAR 225-AMP INDUSTRIAL MIG WELDER
- Designed for heavy duty welding applications such as maintenance of fabrication. Handles 4 to 12 inch spools. Solid state variable wire speed control- 50 to 700 inches per minute, eliminates unnecessary wiring and electrical components. Polarity tap lets you change easily from reverse to straight polarity to weld with flux cored and specialty welding wires. nine heat settings let you choose the right welding temperature for every job. Adapter kit lets you weld the most difficult aluminum jobs. Up to 100% duty cycle lets you weld longer without overheating the welder. Up to 225 amps output lets you weld heavy steel. Sold complete with cart, gun, wall recepticle, ground cable, contact tips, 3 nozzles, 2 drive rollers, teflon and stell liners.
- FEATURES AT A GLANCE
- SOL-2130 SOLAR 85-AMP MIG WELD-N-TOTE
- Highly mobile with 85 amps for more heat and hotter welds. features four settings for finer tuning, high quality wire feed and welding gun and built-in solenoid and gas hose for quick easy conversion to flux-core welding. Will weld 3/16" steel or 18 gauge sheet metal. Comes complete with ground cable and clamp, welding nozzle and contract tip assortment, full welding helmet, starter spool of welding wire and instruction manual. One-year warranty.
- SOL-2150 SOLAR 110-AMP MIG
- Ideal for service stations, garages, body shops and hobby shops. Just plug into any 120-volt 25 amp socket and you can weld 1/4" steel or 24-gauge sheet metal in seconds. Features infinitely variable heat control, spot and stitch mode settings and secondary phase control for improved arc starting and stability. comes complete with high quality wire feed and welding gun, lift-lens welding helmet, wheel caster and kit, shielding gas pressure regulator and hoses, ground cable and clamp, and instruction manual. One year warranty.
- AST-MIG13 ASTRO-PNEUMATIC 130 AMP MIG WELDER
- This welder Features a standard 115 volt primary input for maximum portability. It has four heat settings and welds from 22 gauge to 1/4" steel and up to 1/8" aluminum and stainless steel. The professional cold gun with trigger controlled power supply eliminates unwanted arc.
- SOL-2175 SOLAR 130-AMP AUTO BODY MIG WELDER
- Designed especially for use in auto body repair shops. Precisely calibrated controls let you reset quickly with minimum knob twisting. Trim design fits easily in tight work bays. Cart lets you take the welder, gas bottle and supplies where you need them. Weld steel thickness from 26 gauge to 1/4" in a single pass, welds up to 1/4" aluminum with no expensive attachments. Welds in all positions- vertical, horizontal, overhead or flat. The unique wire feed mechanism accommodates .024, .030 and .035 inch wire. Wire feed is infinitely adjustable from 50 to 700 inches per minute. A nine position heat selector, spot weld duration selector, switch weld duration and interval selector give you exactly the type of weld you need. Sold with cart, gun, wall receptacle, ground cable, contact tips, 3 nozzles, 2 drive rollers, steel and teflon liners.
- FEATURES AT A GLANCE
- Back To The Top Of The Page
- MQT-21012 MARQUETTE STAR-JET ALL PURPOSE OXY-ACETYLENE OUTFIT WITH SINGLE STAGE REGULATORS- $349.00
- Economical welding and cutting outfit. For welding, cutting, brazing, soldering and
heating. Features reverse flow check valves to prevent backflow into opposite regulators.
UL listed. COMPLETE OUT FIT INCLUDES:
MQT-21100 WELDING TORCH HANDLE, MQT-21112 CUTTING ASSEMBLY AND SIZE NO.1 TIP, MQT-21115 WELDING TIP MIXER, MQT-21402 NO. 1 WELDING TIP-Range up to 16 gauge. MQT-21403 NO.3 WELDING TIP-Range 1/16" to 1/8" metal. MQT-21405 NO. 5 WELDING TIP-1/8" to 3/16" metal. MQT-25110 DELUXE OXYGEN REGULATOR-Single stage. MQT-25120 DELUXE ACETYLENE REGULATOR-Single stage. MQT-26012 DOUBLE LINE HOSE-20 ft. length. MQT-51100 WELDING GOGGLES-Shade 5 lens. MQT26313 FLINT TORCH LIGHTER.
- MQT-21013 MARQUETTE WONDER-JET II GAS WELDING/CUTTING OUTFIT- $269.00
- Welds, cuts, heats, solders or brazes. Welds up to 1/2", cuts up to 4". Push
button oxygen cutting control, anodized aluminum and brass torch handle. Cutting tips are
solid copper, welding tips are made of durable copper alloy. Deluxe single-stage
regulators. torch handle is equipped with reverse flow check valves for extra protection.
Ul listed. COMPLETE ASSEMBLY INCLUDES.
MQT-21118 TORCH HANDLE. MQT-21117 CUTTING ASSEMBLY. MQT-21119 WELDING TIP MIXER. MQT-23114 NO. 1 CUTTING TIP-Range up to 1" metal. MQT-23112 NO. 5 WELDING TIP-Range 1/16" to 1/8". MQT-25027 DELUXE SINGLE-STAGE OXYGEN REGULATOR. MQT-25028 DELUXE SINGLE-STAGE ACETYLENE REGULATOR.
- ATD-37250 DELUXE OXYGEN-ACETYLENE WELDING AND CUTTING KIT BY VICTOR- $317.44
- 100% American made. Kit includes oxygen regulator, acetylene regulator, welding handle with #0 welding nozzle, cutting attachment with #0 cutting tip, 20 x 3/16" dual line hose, goggles and spark lighter, 1/2" welding capacity. 4"-6" cutting capacity with optional tips. Welding handle and cutting attachment UL listed.
- MQT-20022 MARQUETTE SUPER-JET OXY-ACETYLENE OUTFIT WITH DELUXE SINGLE STAGE REGULATORS- $399.00
- Anodized aluminum torch handle, stronger than brass, jewel strength and maximum
corrosion resistance. Triple tube cutting torch, triangle design for greater strength.
Gasses are mixed at tip for added safety. Copper cutting tips with slip-in design. Easy to
change and use. Regulators equipped with reverse flow check valves, for extra protection.
Welds up to 5/8", cuts up to 6". UL listed. COMPLETE OUTFIT INCLUDES:
MQT-20100 SUPER JET WELDING TORCH HANDLE. MQT-20115 WELDING TIP MIXER. MQT-20401 NO. 1 WELDING TIP-Range up to 1/16" metal. MQT-20403 NO. 3 WELDING TIP-Range 1/8" to 3/16" metal. MQT-20405 NO. 5 WELDING TIP-Range 1/4" to 3/8" metal. MQT-20112 SUPER-JET CUTTING ASSEMBLY-90 degrees head with size no. 1 tip. MQT-25110 DELUXE OXYGEN REGULATOR-Single stage. MQT-25120 DELUXE ACETYLENE REGULATOR-Single stage. MQT-26002 DOUBLE LINE HOSE WITH CONNECTION-20 ft. 1/4" I.D. MQT-51100 WELDING GOGGLES-Non-fogging, shade 5 lens. MQT-26313 FLINT TORCH LIGHTER.
- Back To The Top Of The Page
- SOL-2020 SOLAR 20 AMP PLASMA CUTTER
- This has an instant pilot arc that cuts through paint and rusty surfaces. there is no high frequency to cause interference or damage to sensitive electronic equipment. It has a trigger activated torch. it is fan cooled. quickly cuts steel, aluminum and stainless steel. CSA certified. Includes 15' plasma torch with tapered cutting nozzles. 10' ground cable and clamp, 6' power cord, and wall receptacle. Built-in air pressure regulator and gauge, full front wide vision helmet, handle and wheel kit.
- SOL-2050 SOLAR 50 AMP PLASMA CUTTER
- This has a trigger activated torch with instant start. Cuts 200 inches of 14 gauge steel or 6 inches of 1/2" thick steel per minute. It has 3 amp settings (30, 40 and 50) that provide speed and temperature best suited for the job. No high frequency to cause interference or damage to sensitive electronic equipment. Quickly cuts steel, aluminum and stainless steel. Includes: 25 ft. plasma torch, 15 ft. ground cable and clamp, 8 ft. power cord and wall receptacle, built-in air pressure regulator and gauge, wheel and handle kit, wide vision helmet, spare parts kit. CSA certified.
- FEATURES AT A GLANCE - warranty 1 year & CSA (Canada & USA) standards
- Back To The Top Of The Page
- MQT-10134 MARQUETTE 295 AMP ARC WELDER- $549.00
- For professional and amateur use. can use any AC rod. Welds, cuts, brazes, heats, and solders. Use it to heat treat and to do hard facing. Burns 3/16 low hydrogen with ease. Provides 30 to 295 amp output at 30 arc volts, and the variable amp control allows for easy one hand operation. Unit comes with cables, ground clamp, electrode holder, full face helmet, power cord, handy welding rod guide and instructions. UL listed.
- MQT-10132 MARQUTTE 100 AMP ARC WELDER- $239.00
- An easy to use portable welder that will weld steel up to 3/8" thick. Cuts, heats and solders also. Efficiently operates on 115 volt household current with 20 amp delay fuse. Ideal for most welding and brazing jobs in the home and garage. 25 to 100 amp output at 22 arc volts. Equipped with fan cooled transformer with moisture-proof impregnated insulation for heat protection and quiet operation. Greaseless shunt lubrication system resists dirt, dust and grit. Includes face shield, cables, electrode holder, carbon arc brazing adapter, ground clamp, and instruction book. U.L. listed.
- Back To The Top Of The Page
- HAMMERS
- ATD-3701 DUAL CHIPPING HAMMER- $18.75
- Chisel head Tomahawk design with replaceable high grade wire brush attached.
- ATD-3702 CHIPPING HAMMER- $15.08
- Combination Cone and Chisel head.
- MQT-15918 MARQUETTE DOUBLE BIT CHIPPING & CLEANING HAMMER- $13.80
- For cleaning slag off metal. Tough, forged alloy steel head with vertical chisel on one end, long tapered point on other.
- Back To The Top Of The Page
- MARQUETTE SOAPSTONE
- For making area to weld or layout work. Package of 10.
- MQT-15301 MARQUETTE QUILK-TITE WORK CLAMPS- $25.64
- 300 amp capacity. Special cooper alloy for high conductivity. Broad, flat base with tapered edge. Easy to get under heavy, flat work.
- MQT-15201 MARQUETTE ELECTRODE HOLDER- $25.29
- 300 amp capacity. Lightweight and heat resistant with fiberglass jaw covers and handles. Copper tongs with firm spring tension hold electrodes securely for all welding positions. insulated for safety.
- MQT-15305 MARQUETTE WIDE GRIP WORK CLAMP- $24.69
- For heavy duty welding. 500 amp capacity. cable connects directly to copper jaws. will take cable sizes up to No. 2/0.
- ATD-8196 OXYGEN-ACETYLENE DUAL HOSE -$531.80
- The ideal capacity reel for all general air or water applications. Incorporates contemporary engineering and manufacturing techniques for trouble free performance. Max. temperature 150 degrees F, 3/8" reel inlet NPTF. Easily repairable in the field with the self contained spring cartridge. Hose included. Hose ID 1/4" , hose length 50' Twin. Made in USA
- ATD-8239 LONG WIRE BRUSH -$3.78
- Lightweight, durable plastic construction, easy-grip handle.
- ATD-8235 AUTOMOTIVE ACID BRUSH -$24.77
- Brush width 3/8", brush trim 3/4", length 6". 144 per box. Solid by box only.
- Back To The Top Of The Page
- SOL-2227 SOLAR WELDING ACCESSORY KIT- $124.99
- Includes 2-1/2 lbs. of .024" wire, 4' of gas hose, regulator, helmet, 1 can anti-splatter spray, hose clamp and 1 swivel hose fitting.
- CONTACT TIPS
- Designed for welding guns on Solar Migs and are compatible for use on other guns sold by Tweco(R). Each pack contains six replacement tips. SOL-4309($4.29) .024", SOL-4310($4.29) .030", SOL-4311($4.29) .035", SOL-4339($4.29) .045".
- WELDING NOZZLES
- Match to the type of welding job. Warning: Clean nozzle throughly for proper shielding gas flow and to prevent false arcs. SOL-4328($7.49) 1/2" NOZZLE For all steel welding applications. SOL-4329($7.49) SPOT WELDING Positions welding wire straight up from weld site. SOL-4330($6.39) 5/8" NOZZLE For aluminum welding, or with Flux-core wire.
- ATD GENERAL PURPOSE WELDING WIRE
- Ideal for welding in all positions. Manufactured to American welding society specs. Has Canadian welding bureau approvals. Double deoxidized mild steel copper coated wire. Produces quality welds with excellent Radiographic and mechanical properties: Tensile strength over 540 N/mmg, yield strength over 450 N/mm, impact strength over 120 j.
- MQT-15526 MARQUETTE MIG ANTI-SPATTER SPRAY- $6.78
- For gun nozzles, contact tips and all surfaces where splatter or slag dross from welding or cutting is objectionable.
- Back To The Top Of The Page
- MQT-25710 MARQUETTE REVERSE FLOW CHECK VALVES- $18.89
- Prevents gasses from backing up and mixing in the regulators, Valves open at 1/2 PSI. Fits all single or two-stage regulators with 1/4" NPT outlet. 1/4" NPT pipe thread and 9/16"-18 thread(1/4" hose fitting size) right hand or left hand thread outlet for either oxygen or acetylene. Sold as a pair, 1 oxygen, 1 acetylene.
- Back To The Top Of The Page
- ATD-3707 WELDING TORCH TIP CLEANER- $5.27
- Standard tip cleaner set. Includes 6 thru 26 cleaners.
- MQT-26321 MARQUETTE WELDING TIP CLEANER KIT- $5.34
- Twelve scientifically designed stainless steel reamers come in handy case. Drill sizes are from 49 to 75. Careful cleaning of welding tips best assures best welding flame and long tip life.
- Back To The Top Of The Page
- ATD-3703 FLINT SPARKER- $3.67
- Standard round torch lighter with replaceable flints. ATD-3704($2.20) Replaceable flints 5/PKG.
- MQT-26311 MARQUETTE THREE FLINT TORCH LIGHTER- $4.66
- A heavy duty torch lighter with self-rotating file and unique, easily replaceable flint holder. Holds three flints.
- MQT-26313 MARQUETTE SINGLE FLINT TORCH LIGHTER- $2.96
- Long life lighter with generous flint and rotating wear-resistant file. Uses low-cost replaceable flint. MQT-26314($1.99) Replaceable flints. Box of 5.
- Back To The Top Of The Page
- ATD-7040 HEAVY DUTY MIG WELDER CART -$
- Top shelf is 19-1/2" x 12-1/2". Heavy duty steel construction, built to last. ATD-7040 will hold any Mig welder: Century, Marquette, Miller, Firepower or Astro up to 175 Amps. The atd mig welder cart enables the user to move portable atd mig welding systems. Includes: built in cylinder rack & storage tray.
- GAS CYLINDER HAND TRUCKS
- ATD-3720 ATD HEAVY DUTY TORCH TANK CART- $310.88
- This American made cart has a solid mount axle design which holds 20" pneumatic, Olite wheels for easy maneuvering. The self leveling tool tray keeps tips and accessories handy. maximum combination tank diameter is 18-1/2". Made from 14 gauge tubular steel. base plate is 14 gauge, 10" x 19". 46" high x 28" wide.
- MQT-26373 MARQUETTE TANDEM TRUCK- $184.58
- Only 17" wide. easily handles in narrow aisles and workshops. all steel tubular framework with zero pressure 10" wheels. For medium tanks. (122 cu. ft.)
- MQT-26375 MARQUETTE STANDARD TRUCK- $183.37
- Lightweight. Easily handles small and medium tanks. (122 cu.ft.) All steel construction with tubular framework and zero.
- 1/4" DOUBLE LINE HOSE
- Tightly braided rayon lines for strength, neoprene base cover for oil and flame resistance. Eliminates kinking and tangling. Hose with connections fits all makes of torches and regulators. 20 and 50 FT.
- MQT-55736 MARQUETTE BRAZING FLUX- $9.49
- For brazing. Cleans all metals and dissolves any oxides present. produces sounds welds on copper, brass, bronze and other copper alloys. One pound per can.
- WELDING TIPS, ARC WELDING ELECTRODES & CUTTING TIPS & GAS WELDING RODS & FLUXES
- Email for prices and availability for diameter needs
- Back To The Top Of The Page
MIG WELDERS
| Welder | Primary input & Primary Amps | Duty Cycle | Wire speed | Wire Size | Weight |
|---|---|---|---|---|---|
| SOL-2160($1499.99) | 230 Volts & 20 Amps | 100%-30% | 0-700"/min | .024, .030, .035 (.045) | 146 LBS. |
| SOL-2225($2499.99) | 230 Volts & 44 Amps | 100%-60% | 50-700"/min | .024, .030, .035 (.045) | 200 LBS. |
| Welder | Primary input & Primary Amps | Duty Cycle | Wire speed | Wire Size | Weight |
|---|---|---|---|---|---|
| AST-MIG13($658.00) | 115 Volts & 28 Amps | 100%-20% | 0-600"/min | .023, .030 | 50 LBS. |
| SOL-2130($624.99) | 120 Volts & 20 Amps | 100%-20% | 10-600"/min | .030, .35, .035(Flux) | 65 LBS. |
| SOL-2150($1329.99) | 120 Volts & 25 Amps | 100%-20% | 0-700"/min | .023, .030, .035 | 108 LBS. |
| SOL-2175($1499.99) | 230 Volts & 20.5 Amps | 100%-20% | 50-700"/min | .023, .030, .035 | 185 LBS. |
OXY-ACETYLENE GAS WELDERS
PLASMA CUTTERS
| Stock No. | Primary input & Primary Amps | Air input & Arc Volts | Secondary Output & Duty Cycle | Assembly Size | Weight |
|---|---|---|---|---|---|
| SOL-2020($1649.99) | 1 Ph. 60 Hz 208/230V & 35/31 Amps | 4 CFM at 70 psi/100V | 20 & 20% | H 37-1/2"/W 16"/D 25-1/2" | 114 LBS. |
| SOL-2050($2799.00) | 1 Ph 60 Hz 208/230V & 60.2/54.5 Amps | 4.6 CFM at 70 psi/100V | 30/45/50 & 42% | H 39-1/2"/W 22"/D 28" | 198 LBS. |
ARC WELDERS
WELDING CHIPPING HAMMERS
WEILDING ACCESSORIES
MIG WELDING ACCESSORIES
