Special
|
- 775PI SERIES SPRAY GUNS $159.00 Ea..
- These guns have perfect balance. Heavy duty production guns built rugged, with pressure indicator built in. Have self aligning air cap for a perfect pattern. SHA-6835 All purpose high speed production gun with 16111 air cap and .070 fluid tip. SHA-6840 Clear coat high speed production gun with 16113 air cap and .070 fluid tip. SHA-6845 Base coats and single stage urethanes gun with 16114 air cap and .070 fluid tip.
- GRAVITY FEED SPRAY GUNS (SGF SERIES) $220.00 Ea.
- These are designed for the professional painter giving him comfort and balance in the European standard of refinishing. The air cap is self aligning for a perfect pattern. It has a built-in air valve and comes complete with gun, cup, hanging hook and gun wrench. SHA-5945 For base coats and single stage urethanes with fluid tip 27010 (.55) and air cap 16114 (1.4mm). SHA-5950 For primers and high solid colors with fluid tip 27014 (.070) and air cap 16108 (1.8mm). SHA-5955 For high solid primers with fluid tip 27015 (.090) and air cap 16115 (2.3mm). SHA-37085 Repair kit for gravity feed guns $24.50. SHA-6675 Replacement nylon for gravity feed cup only $19.50.
- BAD-150-4PK BADGER PROFESSIONAL AIR BRUSH KIT
- Kit comes in attractive wood box and contains one model 150 air brush with medium head assembly, attachable 3/4 oz. jar, 1/4 oz. color cup, 2 oz. jar with cover, protective cap and large head assembly and needle. it also includes one 8' braided air hose, 1/4' pipe thread fitting (adapts to compressor or CO2 tank).
- BAD-250-2 BADGER BASIC AIR BRUSH KIT
- Set contains model 250 air brush with 3/4 oz. jar attached, 6' vinyl air hose and regulator and instruction book.
- Back To The Top Of The Page
- GRAVITY FEED SPRAY GUN KITS (SGF-HVLP) $250.00 Ea.
- These meet all environmental regulations for spray equipment, have self aligning air caps for a perfect pattern and a built-in air valve. Includes gun, cup, hanging hook and gun wrench. SHA-5960 Base coats gun with 37002 air cap and .045 fluid tip. SHA-5963 General purpose colors and clear coats gun with 37002 air cap and .063 fluid tip. SHA-5965 High viscosity colors and clear coats gun with 37002 air cap and .070 fluid tip. SHA-5970 High solids and primer surfaces gun with 37004 air cap and .090 fluid tip.
- SHA-7030 DETAIL GUN $145.00
- For all detailing jobs. Easy to service, easy to use. Trigger designed for right or left handed use. Designed for balance, fits your hand. 1/4" mpt air inlet. 4.1 cfm air consumption at 50 psi. Use with SHA-7510 cup (not included $23.50)
- HIGH VOLUME/LOW PRESSURE SYSTEMS
- Works and feels like conventional equipment. Includes corrosion resistant Niflor(tm) fluid tip, stainless steel fluid passage. Meets all environmental regulations governing HVLP spray equipment. SIPHON FEED SYSTEM $250.00 SHA-5585 General purpose gun for all colors and clear coats with 27003 air cap and .085 fluid tip. PRESSURE FEED SYSTEMS $325.00 SHA-5590 General purpose gun for all colors and clear coats with 27001 air cap and .030 fluid tip. SHA-5595 Primer and heavy materials industrial coatings gun with 27001 air cap and .045 fluid tip.
- Back To The Top Of The Page
- ATD PAINT SPRAY GUNS AND CUPS
- ATD-6826 SPRAY GUN AND CUP ASSEMBLY $81.38
- Set contains one high production spray gun and one ATD-6822 dripless cup $20.40. Spray gun has a brushed aluminum body with stainless steel needle and hardened alloy steel tips. 1/4" air inlet and standard fluid inlet. Dripless cup has 1 quart capacity. Spun aluminum canister with aluminum cover. Fits most leading spray guns. Standard fluid connection. Won't drip when spraying in any position. No accidental spills or damaged work.
- ATD-6820 SPRAY GUN AND CUP ASSEMBLY $70.71
- For professional results. Set contains one ATD-6822 dripless cup($20.40) and spray gun. Specifications: 4cfm - 7 cfm at 50-60 psi air consumption. 1.8mm nozzle size. Minimum 1-1/2 h.p. compressor required. Spray tested before shipping.
- ATD-6832 TOUCH-UP GUN AND CUP ASSEMBLY $54.55
- Set contains one touch-up gun and siphon cup. Gun operates at 30-50 psi, 4 cfm at 50 psi. Professional quality for touch-up spraying, edging, shading or precision painting. Has 1/4" npt/m air inlet. The siphon cup has eight ounce capacity.
- ATD HVLP SPRAY GUNS
- ATD-6850 HVLP SPRAY GUN, 1.4mm $174.15 $169.23
- Fats working speed, wide fan pattern. High transfer efficiency means reduced spray mist. Stainless steel needle and fluid tip. Non-drip plastic cup. Air regulator included.
- ATD GRAVITY FEED SPRAY GUNS $101.26 Ea.
- Precise-machined well balanced, handy, light weight and sturdy construction. Non-bleeder type, gravity feed and external mix. Die-cast aluminum alloy gun body with 2-step trigger control. Spray width and fluid adjustable. Plastic cup with throttle strainer. ATD-6870 2.0mm gravity feed spray gun. ATD-6860 1.4mm gravity feed spray gun. ATD-6862 Repair kit for ATD-6860 $5.23. ATD-6864 Air cap, nozzle, needle $41.45.
- ATD-6861 ATD GRAVITY FEED SPRAY GUN HOLDER $16.00
- Allows painter to fill gravity feed gun without assistance. Also a convenient holder for paint gun between jobs.
- ATD-6843 2 QT. PRESSURE POT WITH SPRAY GUN
- Set contains one high production spray gun, one 2. qt. Sharpe (tm) style pressure pot, & 5' hose. Spray gun has a 1.0mm spray nozzle. 1/4" air inlet and standard 3/8" fluid inlet. Dripless pot has 2 qt. capacity. Spun aluminum canister with aluminum cover. Air pressure: 6 bar (85 PSI). Air consumption: 16 CFM (453 liters per minute).
- ATD-6844 2.75 QT. PRESSURE POT WITH SPRAY GUN
- Set contains one high production spray gun, one 2.75 qt. Sharpe (tm) style pressure pot, & 5' hose. Spray gun has a 1.0mm spray nozzle. 1/4" air inlet and standard 3/8" fluid inlet. Dripless pot has 2 qt. capacity. Spun aluminum canister with aluminum cover. Air pressure: 6 bar (85 PSI). Air consumption: 16 CFM (453 liters per minute).
- ATD-6846 GRAVITY FEED SPRAY GUN HOLDER
- Allows painter to fill gravity feed gun without assistance. Also a convenient holder for a paint gun between jobs. Lightweight & durable plastic construction. Can be mounted on bench or wall.
- ATD-6834 HVLP SPRAY GUN & ASSEMBLY
- Precise-machined, well balanced, handy, light weight and sturdy construction. Non-bleeder type, gravity feed and external mix. Spray width and fluid adjustable. Plastic cup with throttle strainer. atd-6834 includes: 1.4mm spray gun, 0.6 liter aluminum cup, tool set, gauge with regulator & throttle strainer. Gravity feed HVLP spray gun with 1.4mm spray nozzle & aluminum cup with regulator
- ATD-6837 2.0MM GRAVITY FEED SPRAY GUN
- Precise-machined, well balanced, handy, light weight and sturdy construction. Non-bleeder type, gravity feed and external mix. Spray width and fluid adjustable. Plastic cup with throttle strainer. atd-6837 includes: 2.0mm spray gun, 0.6 liter aluminum cup, tool set, & throttle strainer.
- ATD-6836 1.4MM GRAVITY FEED SPRAY GUN
- Precise-machined, well balanced, handy, light weight and sturdy construction. Non-bleeder type, gravity feed and external mix. Spray width and fluid adjustable. Plastic cup with throttle strainer. atd-6836 includes: 1.4mm spray gun, 0.6 liter aluminum cup, tool set, & throttle strainer.
- ATD-6854 HVLP .25L 1.0MM TOUCH-UP SPRAY GUN
- Specially designed for detailing & touching up small surfaces. 0.8mm spray nozzle. 0.25 L non drip plastic cup. Three built in regulators control: paint flow, air flow, and material width. Includes a filter to stop foreign particles from being sprayed on painted surfaces. Air consumption: Max. 43 PSI.
- ATD-6845 HVLP .8MM GRAVITY FEED DETAILING SPRAY GUN
- Specially designed for detailing & touching up small surfaces. 0.8mm spray nozzle. 0.25 L non drip plastic cup. Three built in regulators control: paint flow, air flow, and material width. Includes a filter to stop foreign particles from being sprayed on painted surfaces.
- ATD-6835 HVLP 1.0MM GRAVITY FEED TOUCH-UP SPRAY GUN
- Specially designed for detailing & touching up small surfaces. 0.8mm spray nozzle. 0.25 L non drip aluminum cup. Three built in regulators control: paint flow, air flow, and material width. Includes a filter to stop foreign particles from being sprayed on painted surfaces.
- Back To The Top Of The Page
- KTI-80935 KT INTERNATIONAL GRAVITY FEED TOUGH-UP GUN
- Gravity feed touch up with 1/3 pint capacity nylon cup. The closet gun to an air brush.
- KTI-80945 KT INTERNATIONAL GRAVITY FEED SPRAY GUN
- Gravity feed spray gun with a 1-1/3 pint capacity nylon cup.
- KTI-80955 KT INTERNATIONAL TOUCH UP GUN
- Professional quality for touch up spraying, edging, shading or precision detail painting.
- KTI-80995 KT INTERNATIONAL DELUXE SPRAY GUN
- This deluxe spray gun features siphon feed, external mix, a built in regulator and a dripless cup which is complete with all types of automotive refinishing materials.
- KTI-80998 KT INTERNATIONAL PRODUCTION DELUXE SPRAY GUN
- Professional quality with superior atomization of high solid base coats, clear coats, acrylicenamels, acrylic lacquers, metallic and other conventional coatings. Includes dripless cup.
- Back To The Top Of The Page
- AIR CONTROL UNITS
- SHA-1630 SHARPE AIR REGULATOR $37.00
- This has 3 regulated outlets with 1/4" FPT. Air inlet 3/8" FPT capacity. 50 CFM.
- SHA-6710 SHARPE AIR FILTER $75.00
- Features large reusable edge type filter element. Most effective at removing water and oil contamination. 10 micron filtration. 1/2" FPT air inlet, two 3/8" FPT air outlets. Filter capacity 120 CFM.
- SHA-6720 SHARPE FILTERED AIR CONTROL UNIT $139.00
- One regulator with 160 lb. capacity inverted gauge and air cock, additional regulated outlet and filtered main line outlet included. Air inlet 1/2" FPT. Filter capacity 120 CFM and regulator capacity is 50 CFM.
- SHA-6730 SHARPE TWO-OUTLET FILTERED AIR CONTROL UNIT $165.00
- Two regulated outlets. One regulator with 160 lb. capacity inverted gauge and air cocks. One main line outlet with 200 lb. capacity gauge. Air inlet is 1/2" FPT. Filter capacity 120 CFM and regulator capacity 50 CFM.
- SHA-6950 SHARPE FILTERED AIR UNIT $120.00
- Regulator with 160 lb. gauge, additional regulated outlet, and filtered main line outlet included. Filter capacity 75 CFM. Regulator capacity 50 CFM. Air inlet 1/2" FPT.
- ATD-6752 ATD 1/4" AIR REGULATOR $4.55
- Positive power control assures correct air pressure. Fits standard and heavy duty tools.
- SHA-1010 SHARPE AIR ADJUSTMENT VALVE $9.75
- Precision tapered valve. Full open to close with approximately 4 turns, infinitely adjustable. Large, easy to handle knob. Air inlet 1/4" NPT. Air outlet 1/4" FPT. Spray Gun Accessories- SHA-1410 Mini air regulator 0-160 psi. SHA-3310 High power air reg. with gauge 0-160 psi.
- ATD-6753 ATD AIR CONTROL GAUGE $12.65
- Adjusts air pressure at the air tool. Ideal for spray guns to avoid costly painting errors such as poor match, runs, poor coverage, orange peel, etc. With accurate 0 to 160 psi. gauge. Air inlet 1/4" NPT. Air outlet 1/4" FPT, swizel fitting.
- SHA-2210 SHARPE AIR ADJUSTMENT VALVE WITH GAUGE $20.50
- Same as SHA-1010 with 0 to 160 psi. gauge to adjust air pressure at spray gun. Air inlet 1/4" NPT. Air outlet 1/4" FPT swivel fitting.
- Back To The Top Of The Page
- MOTOR GUARD COMPRESSED AIR FILTERS
- Designed to remove oil aerosols, condensed moisture, smoke, and esstially all rust and scale particles from compressed air lines. They'll provide you with clean dry, oil-free air required for critical applications, including clearcoat finishes.
- MOT-D12-2 SPRAY GUN FILTER $12.40
- Attaches directly to the air inlet of your spray gun and eliminates painting failures caused by oil aerosols and moisture that may condense in the hose downstream of the wall-mounted filters. Card of two filters
- MOT-M30 1/4" NPT SUB-MICRONIC COMPRESSED AIR FILTER $79.95
- Designed for hose or tubing on a remote bracket mount. 45 CFM maximum flow at 80 PSI, 125 PSI maximum pressure. Removal rating of .01 microns. Replacement element MOT-M723.
- MOT-M60 1/2" NPT SUB-MICRONIC COMPRESSED AIR FILTER $79.95
- Designed for direct in-line installation on rigid air lines. 100 CFM maximum flow at 80 PSI, 125 PSI maximum pressure. Removal rating of .01 microns. Replacement element MOT-M723.
- MOT-M723 REPLACEMENT ELEMENT FOR M30 AND M60 (4 pack) $26.00
- Roll of aborbent, high wet strength cellulose wound on a polythylene core.
- SHARPE FILTERS
- SHA-8100 SHARPE DISPOSABLE IN-LINE FILTER $11.95
- Removes contaminates such as moisture and oil that condense in air hose. Helps reduce paint defects.
- SHA-8130 SHARPE AIR FILTER (F88) $59.50
- Features reusable edge-type 10 micron filter element. Highly effective at removing water, oil and contamination. Air inlet 1/2" FPT. Air outlet 3/8" FPT and 1/4" FPT 9plugged). Filter capacity 76 CFM. Traps 99% of all oil, water and contaminants.
- SHA-8135 SHARPE MECHANIC'S FILTER (F88M) $67.00
- Designed for the mechanic who wants to protect his air tools from unfiltered shop air. Portable, mounts anywhere. Designed for use with quick couplers. Air inlet 1/4" FPT. Two 1/4" FPT air outlets (one plugged). 75 CFM capacity.
- SHA-6760 DRYAIRE(tm) DESICCANT SYSTEM $449.00
- A 3 stage desiccant filtration system insures removal of all dirt, water, oil, and uncondensed moisture from air lines. Protects air tools. Approved for today's state-of-the-art paints.
- Back To The Top Of The Page
- PAINT CUPS & PAINT ACCESSORIES
- SHA-6610 SHARPE NO-DRIP CUP $42.00
- Universal siphon cup and attachment fits all leading spray guns. Will not drip when spraying in any position. No accidental spills or damage work 3/8" FPT (swivel nut) attachment thread. One quart capacity.
- SHA-6675 SHARPE GRAVITY CUP $19.50
- This nylon cup has a 22 oz. capacity and fits most gravity feed guns.
- SHA-6615 SHARPE TEFLON LINED NO-DRIP CUP $49.00
- This (no-drip) siphon cup assembly is easy to clean and has a clamp type assembly. Fits all leading brands.
- ATD-6822 ATD DRIPLESS CUP ASSEMBLY $20.83
- Dripless cup is a spun aluminum one-quart canister with aluminum cover. Fits all leading spray guns. Won't drip when spraying in any position. Standard fluid connection. No accidental spills or damage work. Weight .9 lbs.
- ATD-6863 ATD PLASTIC SPRAY CUP $13.63
- Replacement cup for gravity feed spray guns.
- SHA-7510 SHARPE (DETAIL) CUP $23.50
- Cup and attachment is virtually indestructible. Made of Fortiflex(R) high density polythelene. 6 oz. capacity. 1/4" FPT (swivel nut) attachment thread.
- ATD-6831 ATD DETAIL SIPHON CUP $11.54
- Eight ounce siphon cup for use with ATD-6830.
- MAR-38045 MARSON PAINT STRAINER $5.07
- The Trapper(tm) strains all types of paint, prevents undissolved pigments from spoiling paint jobs. Locks into fluid tube on all major paint guns. Reusable and easy to clean. Packed four per card.
- CUP GASKETS
- Pre-packed for use with DeVilbiss, Brinks and Sharpe paint cups. Eliminates sorting gaskets by hand. Made of impregnated leather. SHA-20994 Fits Sharpe primer, production and HVLP cups, (5 PK. $10.95), MAR-30601 Fits DeVilbiss Nos, KR550, KR552 and KR553, (1 each $8.95), MAR-30607 Fits Brinks NO. L47 cup and Sharpe 400/450. (1 each $8.95).
- PREVAL(R) AUTO SPRAYER
- Sprays up to 16 ounces of any automotive acrylic, lacquer, enamel, vinyl, primer, custom color and gel. Built-in strainer screens out solid particles for no clogging. Power units use non-CFC propellent. Self cleaning.PRV-567 Complete sprayer. Power unit and 16 oz. glass container (12)$55.00. PRV-568 Replacement power unit (12)$44.15. PRV-569 Replacement 16 oz. glass container. PRV-520 Preval Counter Display. Point-of-purchase display 10-1/4" x 16". Contains eight complete Preval(R) sprayers. Twelve power units and two reusable glass containers.
- KTI-80996 KT INTERNATIONAL SPRAY GUN ACCESSORIES
- Dripless spray gun cup.
- KTI-89090
- Water seperator with bleeder.
- KTI-89194
- 2 spray gun filters (carded)
- KTI-80989 KT INTERNATIONAL SPRAY GUN CLEANING KIT
- Contains all necessary brushes and tools to effectively clean spray guns. Safe to use with chemicals and solvents.
- KTI-89192 KT INTERNATIONAL AIR-O-SOL SPRAY CAN
- Fill it - pressurize it - Spray it.
1.SHARPE SPRAY GUNS & AIR BRUSH KITS
2.SHARPE SPRAY GUNS
3.ATD PAINT SPRAY GUNS
4.KT INTERNATIONAL SPRAY GUNS
5.SPRAY GUN FILTERS & REGULATORS
6.AIR FILTERS
7.SPRAY EQUIPMENT
- Back To The Top Of The Page
you can use our
If You Have Any Questions Please Email Or Call
Bernie Cragg
1608 Lehigh Station Rd
Henrietta New York, 14467
U.S.A.
Phone (585) 334-8858
Fax 585-334-1373
 |