Special
|
- CLICK FOR PICTURE
- MAR-39000 MARSON PROFESSIONAL RIVET GUN- $45.44
- The plier-size hand tool that works faster and smoother than any other manual riveter. One squeeze sets the rivet. Interchangeable nosepieces screw into the base when not in use. Handles all rivet diameters including 3/32", 1/8", 5/32" steel and 3/16" alloys.
- MAR-39001 MARSON DELUXE RIVETER KIT- $64.46
- Includes 39000 riveter and assortment of popular automotive rivets. Molded plastic case houses riveter, rivets and service tool. Special compartment holds optional countersink drill.
- MAR-39010 MARSON BIG DADDY(R) RIVETER- $240.56
- Easily sets large rivets including 1/4" all steel and split rivets. Extra long handles allow you to work one foot beyond natural and in difficult locations. Comes with standard 3/16" and 1/4" nosepieces plus Klik Split nosepiece for window regulators, glass stops, door handles, etc.
- MAR-39016 MARSON AIR/HYDRAULIC PRODUCTION RIVETER- $261.43
- Medium duty. Rugged construction for continuous use. Sets 1/8", 5/32" and 3/16" diameter rivets in all alloys, with 85 p.s.i. air pressure. Comes with standard 1/8" and 3/16" nosepieces and plastic bottle to catch ejected mandrels.
- MAR-39017 MARSON HEAVY DUTY AIR/HYDRAULIC RIVETER- $527.90
- Air hydraulic design develops enough power to easily set 1/4" steel rivets. Will also set 3/16" rivets in all material combinations. For trucks, trailers and bus repair shops. Requires 85 psi.
- MAR-48005 MARSON LONG-REACH KLIK-LOK(tm) KL-2 PLASTIC RIVET SETTER- $55.04
- A one-stroke, long reach, rivet setter for all plastic rivets. Features a universal nosepiece.
- MAR-39202 MARSON THREAD SETTER KIT- $126.74
- Professional kit contains MAR-39200 Thread Setter, nosepieces, mandrels and service tool, plus an assortment of fractional O.D. Klik Poly-Nuts in thread sizes 8-32, 10-24, 10-32, 1/4-20 and 5/16-18. All components fit in molded heavy duty carrying case.
- ETC-37001 SWIVEL-HEAD PROFESSIONAL RIVET TOOL
- Rivets at any angle with 360 degrees swival head. Easy to use. Heavy duty hardened steel. Comes with 4 nose pieces, 3/32", 1/8", 5/32" and 3/16" wrench and pouch.
- MAR-39040 MARSON KLIKER 2(R) RIVETER- $31.78
- Riveter for both the professional and serious do-it-yourselfer. Spring loaded handles automatically grip rivet for easy operation in awkward locations. Includes 1/8" and 3/16" nosepieces, service tool and sample pack of rivets in display pouch.
- MAR-80883 MARSON RIVET-ALL(R) RIVETER- $15.96
- A value packed inexpensive riveter for the occasional user. Sets 1/58", 5/32" and 3/16" rivets in alluminum. Sets 1/8: in steel. Colorfull display pouch with sample rivets and instruction folder.
- RIVETS
- Marson Klik-Loc(R) plastic rivets, Marson special application rivets, Marson Klik(R)Poly-Nuts(tm).
- Back To The Top Of The Page
RIVET GUNS & KITS
- CLICK FOR PICTURE
- ATD-9559 ATD ADJUSTABLE ALUMINUM FILE HANDLE- $49.05
- Can be adjusted to file flat(convex)or inward(concave)
- SANDING BLOCKS
- Pliable rubber block which holds sandpaper securely during wet or dry sanding. Uses a 2-3/4" x 9" sheet which is a 1/4" of a standard 9" x 11" sheet. Eliminates highlights in work from finger pressure.
- ABRASIVE HAND FILES
- Designed for use in the automotive, marine and industrial fields where plastics, resins of all types, woods, steel, aluminum, etc. are used. A cushion which covers the entire area of the base makes the tool cut faster, preventing slippage, keeps the abrasive clean and helps prevent loading.
- STANLEY SURFORM(R)FILE BLADES
- For shaping, trimming and forming body filler, plastics and soft metal. Ideal for body shop use. Two steel blades with non-clogging razor-sharp cutting edges. Box of ten.
- STN-21-296 STANLEY SURFORM(R)FILE PLANE- $17.00
- Use with stanley 10" Surform(R) blades. Features metal alloy body with impact resistant plastic handle.
- MARSON FILLER SPREADERS & MIXING BOARD
- High-quality and reusable. Designed for mixing and applying resins, fillers, compounds and gels. Made from non-absorbent polyethylene, so filler materials won't stick. Once materials are dry, just twist to clean.
- Back To The Top Of The Page
BODY FILES & BODY SHOP SPREADERS
- WINSHIELD TOOLS
- LIS-47000 LISLE WINSHIELD LOCKING STRIP TOOL - $13.95
- Swivels 90 degrees in either direction. Select the top with opening that most closely fits locking strip, and then feed locking strip into eyelet.
- OLD-1010 OLD FORGE HOOK TOOL- $8.15
- Removes rubber seals or weather stripping. Pick out broken glass from window channels. Remove hog rings on seat covers. Pull cotter keys or snap rings.
- ATD-6516 ATD DELUXE WINDSHIELD REMOVING TOOL- $12.62
- Durable aluminum handle and steel cable pull tool. Cuts caulking compound around windshield fast and easy. Strong, tempered steel blade can be resharpened or replaced.
- KDT-2038 K-D TOOLS WINDOW MOLDING REMOVER-GM, FORD, AMC- $12.33
- Removes window molding clips on GM, Ford and AMC cars. Place jaw flat against glass. Locate clips and roll them out with tip, Keeping jaw flat to glass.
- KDT-2037 TOOLS CHRSYLER WINDOW MOLDING REMOVER- $11.70
- Removes clips and spreads rubber gasket on Chrysler windows. Rounded point spreads zipper type gaskets. Jaws firmly hold clips.
- KDT-2039 K-D TOOLS WINSHIELD WIPER ARM REMOVER- $14.03
- Removes wiper arms on most American cars. Protective pad on bottom jaw will not scratch surface. Place jaws between wiper arm and attachment and squeeze handles to remove.
- LIS-35200 LISLE WINDSHIELD MOLDING TOOL- $5.95
- For removing most windshield molding or door handle clips. Offset handle permits easy access to molding clips. Slips under door handle without damage to panel material.
- AES-355 AES BRAIDING WINDSHIELD WIRE- $7.31
- Especially designed to cut out urethanes. Seven stainless steel wires braided into one, giving you a saw-type action. Contains 72" of wire in a special dispenser package.
- Back To The Top Of The Page
- DOOR HANDLE AND WINDOW CRANK SPRING TOOL
- This tool pushes spring back just far enough to remove handle. Reverse end to remove door panels.
- LIS-35400 LISLE DOOR UPHOLSTERY REMOVER- $8.95
- Rugged tool with a large, comfortable handle. Pops plastic fasteners clean, just place the tool under the edge of the door panel and insert the fastener as far as possible, then pry up.
- LIS-63900 WINDOW HOLDER- $13.95
- Works on all cars and trucks. Simply loop cable over door frame and attach suction cups to each side of glass. Window glass is securely held above the door while work is performed.
- Back To The Top Of The Page
BODY TOOLS
DOOR TOOLS
- CLICK FOR PICTURE
- MTA-HG501A MASTER APPLIANCE HEAT GUN- $97.00
- Die cast aluminum housing. Lightweight, but rugged for industrial use. Powerful turbofan provides quiet, efficient high volume air flow. Big 1-1/4" nozzle directs high volume air flow. Double jacketed heater housing protects heat element from hard knocks. Convenient three-way switch permits on, off and cold at a finger flick. Switch guard protects switch from accidental changes in setting. Adjustable air intake aids in controlling air temperature. Rubber-backed adjustable stand provides firm base when not in use. Rotates 90 degrees for benchtop use. External brush holders permit replacement without disassembly of motor housing. Comfortable, contoured handle assures firm control. Has an eight foot oil-resistant neoprene cord and 3-wire grounded plug. Temperature range: 500-700 degrees. 14 amp motor. UL and CSA listed.
- MTA-EC100 ECONOMY HEAT GUN- $39.95
- Removes paint and decals, thaws locks and pipes. loosens rusted salts. Features dual heat selection(500-1000 degrees). Weighs only 1 lb. for less operator fatigue. 3-wire grounded plug. UL listed.
- MTA-MT50 MASTER APPLIANCE MICROTORCH- $48.46
- This hand-held multipurpose, electronic ignition, refillable butane torch offers the ultimate in convenience, portability, and quality at a low price. Maximum heat temperature of 2500 degrees, and has a burn time of 90-120 minutes per butane charge. Accessory tips and butane refills available.
- MTA-UT200SI MASTER APPLIANCE SELF-IGNITING ULTRATORCH(R)- $142.00
- This high powered high performance butane powered UltraTorch(R) is UL listed. The built-in Piezo electric starting provides quick and easy ignition. It has 5 adjustable temperature settings, will work up to 4.5 hours on a full tank of fuel. 11.9" long, 9 oz. including a soldering tip, heat tip and protective cap.
- MTA-UT100SI MASTER APPLIANCE SELF-IGNITING ULTRATORCH(R)- $103.00
- Compact and lightweight. Heat tip temperature 1202 degrees. Soldering tip temperature 482-932 degrees no torch mode.
- MTA-UT50 MASTER APPLIANCE MINI ULTRATORCH(R)- $84.00
- This shirt pocket sized butane powered tool can solder, and heat. It measures 6.5 inches and weighs 2.2 oz.
- Back To The Top Of The Page
HEAT GUNS & TORCHES
- CLICK FOR PICTURE
- INF-SRU 1615 INFRATECH SPEED-RAY HEAT LAMP- $234.08
- INF-SRU 16715HT INFRATECH HIGH INTENSITY QUARTZ LAMP
- This infrared heat lamp provides 1500 watts and will cure water base primers in less than 6 minutes. 120 volts with four casters and a sturdy steel stand.
- INF-TLS 1750C INFRATECH HEAT LAMP- $211.68
- This low intensity infrared heat lamp works especially well on lacquers and lacquer based primers. it will hold up to seven 250 watt infrared bulbs. Bulbs not included. Comes with four casters and a sturdy steel stand.
- Back To The Top Of The Page
