Special
|
- ATD-3048 10 TON STRAIGHT PULLER
- More convenient than standard pullers. Versatile and easy to use, 10" bar. 3 pairs of puller arms included. Puller arms slide back & forth.
- ATD-3047 5 TON STRAIGHT PULLER
1 Ton Description & Reach Max. Spread Max. Screw Size OTC-1020($29.95) 2 Jaw 2-1/8" 3-1/4" 5/16"-24 x 3-7/8" OTC-1021($44.95) 3 Jaw 2-1/8" 3-1/4" 5/16"-24 x 3-7/8"
2 Ton Description & Reach Max. Spread Max. Screw Size OTC-1022($29.95) 2 Jaw Rev. 3-3/8" 4" 3/8"-24 x 4-7/8" OTC-1023($41.95) 2-3 Jaw Rev. 3-3/8" 4-3/4" 3/8"-24 x 4-7/8" OLD-2204($37.20) 2 Jaw Rev.& Adj. 3-1/2" 4-1/2" 3/8" x 4-1/4" OLD-2611($36.30) 3 Jaw Adj. 3-1/2" 4" 3/8" x 4-1/4" ATD-5461($) 32Jaw Adj. 3-1/2" 4" 3/8" x 24-3/4" ATD-5462($) 3 Jaw Adj. 3-1/2" 4" 3/8"-24 x 4-1/4"
5 Ton Description & Reach Max. Spread Max. Screw Size OTC-1024($39.95) 2 Jaw 3-1/4" Extra Long Rev. & Adj. 6" 9/16"-20 x 6-15/16" OTC-1025($44.95) 2 Jaw 5-1/2" Extra Long Rev. & Adj. 6" 9/16"-20 x 6-15/16" OTC-1026($52.95) 2-3 Jaw Rev. 3-1/4" 7" 9/16"-20 x 6-15/16" OTC-1027($59.95) 2-3 Jaw 5-1/2" Extra Long Rev.& Adj. 7" 9/16"-20 x 6-15/16" OLD-2613($57.30) 2-3 Jaw Adj. 5-1/2" 8" 9/16" x6-3/8" ATD-5468($) 2 Jaw Rev.. 3-1/2" 6" 9/16"- 20 x 6-3/8"
7 Ton Description & Reach Max. Spread Max. Screw Size OTC-1035($74.95) 2 Jaw Rev. 5" 9" 11/16"-18 x 9" OTC-1037($99.95) 2-3 Jaw 5" 10-1/2" 11/16"-18 x 9" OTC-1038($99.95) 2-3 Jaw Adj. 8-3/4" 11" 11/16"-18 x 9" OLD-2210($75.10) 2 Jaw Rev & Adj. 7" 10" 11/16" x 8-3/8" OLD-2615($90.35) 2-3 Adj. 9" 11" 11/16" x 8-3/8"
13 Ton Description & Reach Max Spread Max Screw Size OTC-1039($139.95) 2 Jaw Adjust. 11" 12-1/2" 13/16"-16x12" OLD-2606($111.25) 2 Jaw Adjust. 11" 12" 13/16" x 12" OLD-2607($124.45) 2 Jaw Adjust. 15" 15" 13/16" x 12" - Back To The Top Of The Page
1.PULLERS
- HARMONIC BALANCER PULLER SETS
- These pullers are designed to remove balancers, vibration dampeners, pulleys and gears with tapped holes. Works on most steering wheels
- ATD-7560($28.31) Includes Bolts 3/8"-24, 5/16"-18, 3/8"-16
- KDT-2286($22.25) Includes Bolts 3/8"-24, 5/16"-18, 3/8"-16, 10mm
- LIS-45500($21.45) Includes Bolts 3/8"-24, 5/16"-18, 3/8"-16, 8mm, 10mm
- OLD-2513($24.70) Includes Bolts 3/8"-24, 5/16"-18, 3/8"-16, 8mm, 10mm
- OLD-2514 OLD FORGE HARMONIC BALANCER INSTALLER TOOL SET- $43.40
- A handy tool for installing harmonic balancers or drive pulleys that are pressed on the crankshaft. Choose from eight threaded adapters with three metric sizes finished in black. Bright luster plate and black oxide. Comes in vinyl pouch. Sizes Included: 7/16"-20, 1/2"-20, 9/16"-20, 5/8"-20, 3/4"-16, m12x1.50, M14x1.50, M16x2.0.
- OTC-525 OTC TASKMASTER TWINS- $67.95
- Designed to pull harmonic balancers and steering wheels. Contains three 3/8"-24 x 3", three 5/16"-24 x 3", three 3/8"-24 x 3", three 5/16"-18 x 3-1/2" size cap screws.
- DOWEL PIN PULLER SETS
- Removes set dowel pins from engine blocks and other surfaces. 3-pound slide hammer removes toughest dowel pins. Features machined knurled handle and slide hammer. Comes in a custom blow molded case.
- ATD-5151($159.92)-STANDARD SET COLLET SIZE-1/4' to 5/8" or ATD-5152($152.22)-METRIC SET COLLET SIZE-6mm to 16mm
- ATD-3052 PULLEY PULLER & INSTALLER SET -$34.34
- Remove pressed-on alternator power steering pulleys on late model GM, Ford and Chrysler engines. The threaded end installs late model GM alternator and power steering pulleys. Including Quad 4. Reverse the jaws to pull the alternator internal bearing. The puller fits some AMC vehicles as well.
- Back To The Top Of The Page
- ATD-7559 ATD STEERING WHEEL PULLER SET- $16.20
- Pulls all steering wheels without shaft thread damage. Can be adjusted for other pulling jobs. Includes three sets of side bolts to work on most domestic and imported cars.
- KDT-2291 K-D TOOLS STEERING WHEEL PULLER- $21.32
- Pulls steering wheels on most U.S. and imported cars. Floating swivel on center screw prevents damage to steering column. Five sets of side bolts included: 3/8"-16, 5/16"-18, 5/16"-24, 1/4"-28, 8mm x 1.25. Select bolts that fit threaded holes in the steering wheel and will also remove crankshaft on Chrysler 2.2 and 2.6 engine
- OLD-2508 OLD FORGE STEERING WHEEL PULLER- $22.65
- Removes the steering wheel from most cars light and medium trucks. The 5/8" x 4" center screw is equipped with a floating swivel, recessed to prevent damage to horn wires connections on buick and cadillac. Contains the following screws. Two 55/16"-18 x 4-1/2", Two 5/16"-24 x 3-1/2", Two 5/16"-18 x 4"(S.I.R.), Two 5/16"-18 x 3-1/2", Two M8 x 1.25 x 90mm
- OTC-7403 OTC STEERING WHEEL/FLYWHEEL PULLER- $31.95
- Pulls steering wheels on most makes and models cars. Can also be used as a regular two or three way puller to remove pulleys, small flywheels, etc. Works on nearly all GM, Ford and Chrysler automobiles with or without colaspsible steering columns. Contains the following cap screws. Two 3/8"-16, Two 5/16"-18, Two 5/16"-24, Two 5/16"-18 x 4" (S.I.R.)
- OTC-7031A OTC STEERING WHEEL LOCK PLATE REMOVER- $48.95
- Simplifies removal and installation of the rounang wheel lock plates. A must for access to turn signal switches on current models of GM cars. For all late model GM, AMC and Chrysler model cars with either metric, tilt or conventional steering columns.
- KDT-2414 K-D TOOLS STEERING WHEEL LOCK PLATE REMOVER AND INSTALLER- $19.45
- Depresses steering wheel lock plate allowing easy removal and reassembly of the snap ring. A must for servicing turn signals, ignition switches and steering locks built into steering column. Includes SAE and metric center screws.
- OLD-2539 OLD FORGE STEERING WHEEL LOCK PLATE REMOVER- $19.30
- A great time saved for both removing and installing lock plates on cars with both conventional and tilt steering wheels. The two adapters allow this tool to be used on both 9/16"-18 threads and 14mm threads.
- OLD-2542 OLD FORGE POWER STEERING PUMP PULLEY INSTALLER- $32.10
- Specifically designed to to install the pulley on power steering pumps. Up to 4 tons of force is necessary to press the pull on to the end of the shaft. A choice of two adapters permits it to be used on Ford, GM and chrysler products. Black oxide and bright luster plate finish.
- ATD-3040 STEERING WHEEL PULLER -$14.83
- Specialized puller set for steering wheel, pulley and fly wheel puller. Works on most GM, Ford and Chrysler cars. Can also be used as a two or three way puller to remove pulleys and flywheel from small engines and snowmobiles.
- ATD-5464 STEERING WHEEL PULLER -$
- This tool is designed to pull steering wheels on all major makes of automobiles. The 5/8" x 4" center screw is equipped with a floating swivel, recessed to prevent damage to horn wire connections. Five sets of slide screws provided: 3/8" x 16 (4" long), 5/16" x 18 (4-1/2" long), 5/16" x 24 (3-1/2" long), two M8 x 1.25MM. two 1/4" x 28 x 3. zinc plated. Packaged in attractive clamshell packaging.
- ATD-5467 STEERING WHEEL LOCK PLATE REMOVER
- Designed especially for air bag equipped vehicles. Depresses steering wheel lock plate for removal of snap ring. Allows turn signals and ignition switches to be serviced on GM and Chrysler vehicles. Includes: 9/16" x 18 and 14mm adapter. Center screw: 7-1/4" OAL. bridge: 4-1/2"
- ATD-3049 STEERING WHEEL REMOVER/LOCK COMPRESSOR SET -$43.66
- Removes steering wheels of most domestic and imported vehicles, with or without telescoping tilt steering columns.
- Back To The Top Of The Page
3.STEERING WHEEL PULLERS
- POSI-LOCK THREE JAW PULLERS
- These manual gear and bearing pullers set new standards for quickness, ease and
convenience. Using these is strictly a one man operation. The "T" handle and
cage control the jaws at all times. These do not slip making them safer with little wear
and tear on components removed.
POSI-LOCK MODEL Capacity & Reach Spread No. of Jaws POS-104($104.00) 2-1/2 Ton-4" 1/2"-5" 3 POS-106($138.00) 10 Ton-6" 1/2"-7" 3 POS-108($176.00) 17 Ton-8" 3/4"-12" 3 POS-110($197.00) 20 Ton-10" 1'-15" 3 POS-208($153.00) 12 Ton-8" 3/4"-12" 2 POS-210($165.00) 20 Ton-10" 1'-15" 2 - POWER STEERING PULLEY PULLERS
- OLD-2540 OLD FORGE PULLEY PULLER- $46.90
- Designed to remove pressed on 1 or 2 groove pulleys from alternators and power steering pumps. The attached jaws afford a firm grip on the flange. After thumb screws are adjusted to tighten jaws, the center screw is given a few turns to draw the pulley or bearing off its shaft.
- OTC-7607 OTC POWER STEERING PUMP PULLEY TOOL KIT- $133.00
- Includes tools needed to remove and install on Chryslers and Ford vehicles, some VW's and GM vehicles including U-van and Quad-y.
- OTC-7771 OTC FORD POWER STEERING PUMP- $43.95
- Pulley installer, 1991 and newer models of 4.6L modular engine. Threads are 8mm to fit metric threads on Ford C111 pump.
- KDT-2897 KD TOOLS PULLEY REMOVER AND INSTALLER KIT- $80.37
- Will remove and install pressed-on alternator and power steering pump pulleys on most domestic cars, light trucks and some heavy duty trucks
- KAS-5239B KASTER POWER STEERING PUMP/ALTERNATOR PULLEY REMOVER AND INSTALLER- $71.23
- Works on all domestic vehicles. Works on pulleys with grooved hud diameters of 1-1/8", 1-1/4", 1-5/16" and 1-3/8". Also removes and installs GM belt driven vacuum pumps and pressed on water pump pulleys on GM 4 and 6 cylinder.
- OTC-7785Powering Steering Pump/Alternator Pulley Installer OTC
- For Most Chrysler, Ford GM, and VW vehicles fitted with Saginaw, Thompson, or Ford's C2 and C111 power steering pumps: Gm belt-driver vacuum on cars: and press-on water pump pulleys on GM 4 and 6 cylinder engines
- AST 7847 ASTRO POWER STEERING PUMP PULLEY KITUsed to remove and install power pump pulleys in most domestic cars with Saginaw, Thompson and Ford C2 and C111 power steering pumps. Fits 1-1/8", 1-1/4", 1-5/16" and 1-3/8" pulley hub diameters including: GM minivans1988 to current GM cars equipped with Quad 4 engines, 1991 to current Ford 4.6L engines with metric shafts, and Chrysler Cirrus, Stratus and Breeze. Weight 2.5 lbs.
- Back To The Top Of The Page
4.POSI-LOCK & POWER STEERING PULLERS
- OLD-2545 OLD FORGE REVERSIBLE JAW SLIDE HAMMER PULLER- $94.35
- This versatile puller can be used for removing bearings, bushings, pinions, grease retainers, and seals as well as gears. Adjustable for internal or external pulling. Inside puller has 1-1/4" to 3-3/8"- 2 jaw spread and 1-5/16" to 4-3/4"- 3 jaw spread. Outside puller has 1" to 4-1/2"- 2 jaw spread and 1-1/2" to 4-1/2" - 3 jaw spread. Comes equipped with a 3 lb. hammer on a 5/8"- 18 x 22" long rod.
- OLD-2550 OLD FORGE SLIDE HAMMER- $166.85
- Comes with OLD-2545 puller. Contains one on each of the following
- OLD-2546 BODY DENT PULLER ATTACHMENTS- $22.70 Includes 4 sizes sheet metal screws and adapter.
- OLD-2547 JAW ATTACHMENT- $12.25. Hook tool for quick removal of seals, retainers, etc.
- OLD-2548 PILOT BEARING PULLER ATTACHMENT- $40.70
- OLD-2538 OLD FORGE PILOT BEARING PULLER HAMMER TYPE- $42.70
- Turn the handle for quick adjustment and the center rod spreads the forged steel jaws for a tight fit inside the bearing. A few light taps with the sliding hammer, and the bearing is removed. Capacity 1/2" to 1-1/2" I.D. Comes equipped with a 1 lb. 14 oz. hammer on a 1/2" - 13 x 13" long rod.
- OTC-1176 OTC REVERSIBLE JAW SLIDE HAMMER PULLER- $109.95
- Will accomplish many pulling jobs involving gears, bearings, outer races, grease retainers, oil seats, etc. Can be positioned to handle inside or outside pulling jobs. Inside puller has 1-1/4" to 3-1/2" - 2 jaw spread and 1-1/2" to 4-1/4" - 3 jaw spread. Outside puller has 1" to 4-1/2" - 3 jaw spread and 1-1/2" to 4-1/2" - 3 jaw spread. Comes equipped with a 2-1/2"lb. hammer.
- OLD-2520 OLD FORGE FLANGE TYPE AXLE PULLER- $52.70
- The bolt circle range of this rugged puller is 4-1/2" to 5-1/2", which will accommodate all major cars and most trucks with flange type axles. The arrangement of the slots in the yolk permits it to be used where the stud design has 4, 5 or 6 studs in the circle. An extra heavy sliding hammer makes short work of difficult jobs. Comes equipped with a 5 lb. hammer on a 5/8" - 18 x 22" long rod.
- OTC-1179 OTC EIGHT-WAY SLIDE HAMMER PULLER SET- $159.95
- This 5 lb. slide hammer set has attachments that let you handle litterally hundreds of pulling jobs. Pull flange type rear axles, remove stubborn oil seals, bearings and other press fit parts. It can be set up for 2 or 3 jaw internal or external pulling jobs. Contains the following
- OTC-1155 SLIDE HAMMER WITH 5 LB. HAMMER
- OTC-7372 REAR AXLE PULLING ATTACHMENT
- OTC-24544 3-WAY CROSS HEAD
- OTC-24545 CONE
- OTC-27241 2-WAY CROSS BLOCK
- OTC-27315 PULLER HOOK ATTACHMENT
- OTC-34698 PULLING JAWS. 3 for internal or external pulling jobs
- OTC-205377 DENT PULLER ATTACHMENT
- OTC-205378($17.80) GRIP WRENCH ADAPTER. Wrench not included.
- OTC-1189 OTC 10-WAY SLIDE HAMMER PULLER SET-"SILVER SLAPPER PLUS"- $299.95
- includes otc-1179 (above) plus, internal/external pulling jaws(3),6 1/2". Internal pulling jaws(3),2-3/8". Front hub puller assembly. Forcing screw. Sleeve. Plastic organizer tray.
- ATD-3045 SLIDE HAMMER PULLER SET -$106.03
- Eases removal of flange-type axis, oil seals, bearings & other press fit parts. Jaws can be set up for 2 or 3 jaw internal or external pulling jobs. Heavy duty carrying case includes the following: 5lb. heavy duty hammer, 8 function internal or external 3 jaw puller, internal or external 2 jaw puller, puller hook, rear axle puller, dent puller, special grip wrench adapter.
- Back To The Top Of The Page
5.SLIDE HAMMER PULLER SETS
- BEARING PULLERS
- OTC-7180 OTC UNIVERSAL BEARING CUP INSTALLER- $295.95
- Adjustable bearing cup installer is designed for installing bearing cups from 3-5/8" to 6-1/2" O.D. Ideal for wheel bearing cups on tractor/trailer wheels from 11,000 to 50,000 lbs. capacity. All you do is adjust and lock the jaws to the cup I.D., slip on the new cup, put in place and hit the handle with a hammer. Dose the job without damage.
- OTC PILOT BEARING PULLERS
- Designed to pull flywheel pilot bearings in close quarters where a slide hammer can not be used. Operates on many models with engine in chassis
- OTC-7318($81.95) Capacity 1/2" to 1-1/2" I.D. reach 1"
- OTC-7319($95.95) Capacity 7/8" to 2" I.D> reach 1"
- OLD-2537 OLD FORGE PILOT BEARING PULLER- $37.55
- When working space is limited, this type of puller is needed for removal of flywheel pilot bearings up to 7-1/2" long from automobiles, trucks and tractors. The tool can also be used to pull bearings or bushings from generators and starters. Capacity 1/2" to 1-1/2" I.D.
- OTC-7494 OTC REAR AXEL BEARING PULLER SET- $96.95
- Set of three pullers make s short work of removing semifloating rear axle bearings. Min-max axle tube ID sizes, 1" - 1-7/8", 1-5/16" - 2-3/8" and 1-3/8" - 2-7/8". For use with 5/8" - 18 thread slide hammer.
- SEAL PULLER
- LIS-56750 LISLE SEAL PULLER- $8.75
- Pops the seal every time, fast and easy. Simply insert the tip of the tool behind the grease or oil seal, press and pull leverage works for you. No more pounding, hammering and digging that might damage bearings. Two size tips reach in and nearly fit all seal applications.
- FLANGE PULLER
- OTC-518 OTC FLANGE TYPE PULLER- $34.95
- Quickly and easily pulls harmonic balancers, timing gears and other parts. Works equally well on parts having 2 or 3 tapped holes. slotted holes in puller body permit cap screws to be positioned to handle bolt-circle diameters from 1-1/2" to 4-5/8". Included with puller are three cap screws 3/8" - 24NF x 3" and three cap screws 3/8" - 16NC x 3".
- PUSH PULLERS
- OTC-927 OTC 10 TON CAPACITY PUSH PULLER- $124.95
- Comes equipped with one pair of legs. Reach 8-1/4". Spread 2-1/8" to 7-1/4". Screw size 3/4" - 16 x 12". 1/2" of forcing screw tip end is threaded 5/8" - 18>
- OTC-938 OTC 17-1/2 TON CAPACITY PUSH PULLER- $234.95
- Spread 3-1/8" to 11-3/4". Comes equipped with one pair of legs. Reach 11-5/8". Screw size 1" - 14 x 13-1/4". Leg ends are threaded 5/8" - 18.
- PULLEY PULLERS
- OTC-522 OTC LARGE GEAR AND PULLEY PULLER- $63.95
- Removes parts having tapped holes, such as gears, pulleys, etc. Cap screws are not included with this puller, but any screws up to 1/2" diameter may be used. Spread range is 2" to 7-3/4". Puller block is 8-1/4" wide, forcing screw is 3/4" - 16 x 11-5/8".
- ATD-3046 PITMAN ARM PULLER -$20.86
- For the mechanic who prefers the safe and steady pull of a screw type puller. This tool eliminates the necessity of having several different tools for pitman arms. It has a heavy duty center screw and a heat treated yoke drop forged from high grade alloy steel. Heavy design of the yoke eliminates spreading and breakage.
- ATD-3041 HARMONIC BALANCER PULLER -$19.82
- Heavy duty flange puller. Quickly and easily pulls harmonic balancers, timing gears and other parts with bolt circle diameter from 1-1/2" to 4-5/8". Works on most automobiles, large and small, foreign and domestic. Will pull parts with tapped holes like fly wheels, gears and pulleys.
- Back To The Top Of The Page
