- Click For Picture
- CPT-825 CHICAGO PNEUMATIC LIGHT DUTY AIR RATCHET- $151.58
- Ideal tool for confined working conditions where light duty repair is required. Great for under dashboard work, small engine repair or any area in which small fasteners may be used. Square handle design for positive grip. Durable improved ratchet head with a convenient forward/reverse button for easy operation. Compact, lightweight, ball type socket retainer for positive retention. Easy speed control throughout range.
- IRC-103 INGERSOLL-RAND 1/4" STUBBY AIR RATCHET WRENCH- $154.95 (SALE! $109.00)
- This compact 1/4" drive air ratchet wrench is designed for running small fasteners in confined areas. Excellent tool for small engine repair, headlight service work and bench work. Reaches areas where impact wrenches can't. Runs fasteners twice as fast as by hand. Lightweight at only 1-1/8 LBS.
- AST-2760C ASTRO PNEUMATIC 1/4" AIR RATCHET- $72.70
- This is an economical tool for use where low torque is required. It has low air consumption and a lever type throttle for excellent too control.
- AST-8260K ASTRO PNEUMATIC 1/4" IMPACT WRENCH AND 1/4" AIR RATCHET KIT- $184.90
- This kit contains model 826 1/4" impact wrench with a maximum torque of 40 ft/lbs. and average air consumption of 2 CFM. Kit also has model 2760C 1/4" air ratchet. Both in a blow molded case with seven 1/4" drive impact sockets and an extension.
- KTI-82500 KT INTERNATIONAL MINI 1/4" AIR RATCHET
- A must for dashboards, trim work and hard to get to places. Ideal as a hand ratchet and as a air powered wrench
- Back To The Top Of The Page
- Click For Picture
- CPT-825T CHICAGO PNEUMATIC 3/8" MINI RATCHET- $149.58
- This smallest 3/8" drive ratchet made. Gives you larger bolt capacity in tighter spots. Perfect for under the dash or carburetor work. Square handle design for positive grip. Ball type socket retainers. Features easy speed control throughout range.
- CPT-828 CHICAGO PNEUMATIC 3/8" HEAVY DUTY AIR RATCHET- $149.95
- Provides the extra power needed for jobs such as exhaust system work, small engine repairs, water pumps, fuel pumps, body work and radiator/air conditioner removal/replacement. Patented square handle design for positive grip, durable and improved ratchet head, ball type retainer for positive socket retention. Teasing throttle for precise speed control.
- IRC-107 INGERSOLL-RAND 3/8" HEAVY DUTY AIR RATCHET WRENCH- $154.95
- This economical 3/8" air ratchet wrench is designed for running small bolts on and off in confined areas. Its small size makes it an excellent tool for body shop work, radiator removal and replacement, spark plug, air conditioning and water pump replacement. Ball and needle bearing construction for long service life. Variable speed throttle provides good speed control.
- IRC-111 INGERSOLL-RAND 3/8" REACTIONLESS SUPER DUTY RATCHET- $269.95
- Two times faster than other ratchets, unique reactionless mechanism makes gearing unnecessary, so you can get more speed and power. And it absorbs kickback when nuts run tight. Great for work on muffler clamps, shocks, stabilizer pins, bar clamps, water pumps, radiators, A/C systems and spark plugs. Features rear exhaust.
- 1/2" DRIVE AIR RATCHETS
- CPT-828H CHICAGO PNEUMATIC 1/2" RATCHET- $147.95
- Advanced patented head design provides dramatically longer life. Efficient 1/2 HP motor provides up to 50 ft/lbs. of torque.
- IRC-1077 INGERSOLL-RAND 1/2" RATCHET- $164.95
- Compact and powerful with all the same quality features of the IRC-107, plus 1/2" square drive.
- KTI-82200 KT INTERNATIONAL MINI 3/8" AIR RATCHET
- This tool is identical to the Mini 1/4" except that it features a 3/8" square drive for wider power socket size offerings
- KTI-82501 KT INTERNATIONAL 3/8' AIR RATCHET
- Versitility that combines speed with power for 3/8" bolt applications. Use for small engine repairs, service carburetors, water pumps, radiators and air conditioning units
- KTI-82503 KT INTERNATIONAL HEAVY DUTY 3/8" RATCHET
- A 1/2 h.p. motor that will produce 60 ft/lbs. @ 90 psi, and allow you to hand ratchet to an ultimate torque of 150 ft/lbs.
- KTI-82505 KT INTERNATIONAL 1/2" AIR RATCHET
- A true 1/2" ratchet for heavy duty application. Ideal for high torque bolts in limited work areas.
- Back To The Top Of The Page
- Click For Picture
- CPT-721 CHICAGO PNEUMATIC 3/8" MODERATE DUTY AIR WRENCH- $204.53
- This economical, lightweight pistol grip air wrench is an excellent choice for bench work, transmission tear-down and assembly and engine work. Also suited for work on all types of small engines. Built-in power regulator, positive action trigger, pistol type grip with forward/reverse button on side.
- CPT-724 CHICAGO PNEUMATIC EXTRA HEAVY DUTY IMPACT WRENCH- $212.95
- This tool develops more power than any other 3/8" air wrench in its class. Designed to be light weight and compact, yet with the power to handle all 3/8" applications.
- AST-135BT ASTRO PNEUMATIC 3/8" SNUB NOSE IMPACT WRENCH- $85.50
- This pistol grip tool is designed for easy access into tight spots. the rubber nose guard protects the tool and work surface, it has a built-in power regulator and positive action trigger to speed control.
- IRC-207 INGERSOLL-RAND 3/8" HEAVY DUTY ANGLE HEAD AIR IMPACT WRENCH- $184.95
- This economical 3/8" square drive angle head impact wrench is our most compact. Can be used for exhaust system, air conditioning and small engine repair work. The angle head design makes this tool more maneuverable in confined working areas. Built-in air regulator for positive speed control. Convenient forward/reverse mechanism.
- IRC-212 INGERSOLL-RAND 3/8" SUPER DUTY AIR IMPACT WRENCH- $259.95
- Jumbo hammer impact mechanism delivers smooth power with only three moving parts and is unaffected by air pressure changes. Built-in power regulator allows power reduction in one direction and full power in the opposite direction. Built-in lube system, compact pistol grip, steel hammer case. Two-piece construction allows easy servicing. Handle exhaust keeps air blown debris away from the operator's face.
- CPT-722 CHICAGO PNEUMATIC 3/8" BUTTERFLY IMPACT- $204.53
- Lightweight butterfly throttle design allows one-handed small faster work in engine, body and repair shops. Ideal for small engines, carburetor work, ignitions, body panels, oil pans, bumpers and fender strut. Air inlet swivels 360 degrees with positive action air regulators.
- IRC-205 INGERSOLL-RAND 3/8" HEAVY DUTY BUTTERFLY AIR IMPACT WRENCH- $184.95
- Features a convenient butterfly style throttle valve for single handed control of speed in forward and reverse. Its small size makes it suitable for transmission, body panel, exhaust system and small engine repair. Air regulator built in to swivel and allows positive control of performance output.
- AST-138T ASTRO PNEUMATIC 3/8" SINGLE HAMMER BUTTERFLY IMPACT- $99.00
- The compact, lightweight tool has a ribbed body for a sure grip. The 360 degrees swivel inlet keeps hose from getting twisted. It has a built-in power regulator. the butterfly throttle gives single handed control in forward and reverse.
- KTI-81550 KT INTERNATIONAL
- The popular butterfly 3/8" drive with built-in power regulator features instant forward and reverse throttle speed. Steamline design eliminates 2 piece housing construction for excellent power to weight ratio.
- KTI-81560 KT INTERNATIONAL PISTOL GRIP IMPACT WRENCH
- Unlike most competitive 3/8" pistols that are nose heavy, this 3/8" is perfectly balanced and has the best power to weight ratio on the market.
- KTI-81574 KT INTERNATIONAL HIGH PERFORMANCE IMPACT WRENCH
- Most powerful 3/8" impact available. This high performance impact is ideal for transmissions, exhaust systems, body shops, general repair, body panels, fender struts, bench work and small engine work
- Back To The Top Of The Page
- Click For Picture
- CPT-726 CHICAGO PNEUMATIC MINI IMPACT WRENCH- $212.95
- Designed to be lightweight and compact with lots of power. Great for transmission repair, exhaust systems, body shops, bench work and general repair. Dyna Pact clutch with power regulator, rubber scuff guard and plunger type reverse.
- CPT-731 CHICAGO PNEUMATIC IMPACT WRENCH- $196.95
- A big step up in power for those tough jobs. it has a powerful Double Dog Clutch, a high output motor with variable speed trigger. built-in regulator.
- IRC-231 INGERSOLL-RAND 1/2" HEAVY DUTY AIR IMPACT WRENCH- $217.95
- I-R's most popular 1/2" square drive air wrench. Twin hammer impact mechanism provides more power for a wide range of automotive applications. The perfect choice for general automotive work, light truck, farm, body shop and front end work. Two piece construction for easy servicing. Variable speed control trigger.
- AST-121T ASTRO PNEUMATIC ECONOMY IMPACT WRENCH- $81.80
- Designed for general purpose work. Rocking Dog hammer mechanism ensures dependability. Built-in regulator and plunger type reverse valve.
- 1/2" ELECTRIC IMPACT WRENCHES
- BDT-6513 BLACK & DECKER 1/2" REVERSIBLE BULLDAWG(tm) WRENCH- $289.00
- Built rugged for dependability and high performance. has precision machined, heat treated alloy steel gears. Powerful motor provides high torque output. Ball and roller bearing construction. AC/DC capability for versatility.
- IRC-8409 INGERSOLL-RAND 1/2" HEAVY DUTY IMPACT WRENCH- $429.95
- Unique reversing mechanism gives full power in forward and reverse. Ball and sleeve bearings. Aluminum hammer case and separator protects the hammer mechanism.
- KTI-81606 KT INTERNATIONAL STANDARD DUTY 1/2" IMPACT WRENCH
- The 81606 features a full polished tool, reverse trgger, "ROCKING DOG" clutch and built-in power regulator. Working torque range of 25-140. It is the ideal choice for all everyday 1/2" drive applications.
- KTI-81626 KT INTERNATIONAL 1/2" MECHANICS IMPACT
- The 81626 features a full polished tool, reversing trigger, "ROCKING DOG" clutch and built in power regulator. Working torque range 25-180 FT/LBS. Applications - Transmisions,Body shops, General repair..
- KTI-81631 KT INTERNATIONAL 1/2" HEAVY DUTY IMPACT WRENCH
- The twin hammer provided in this tool extends life under heavy use with a high output motor developing high torque levels. The steel clutch housing provides additional durability for a long life. This tool is made for all the tough jobs with ease. 5/8" Capacity. Applications - Frame repair and rebuild, Suspension repair, Professional Tire repair, Small Truck repair, Construction Equipment, Farm Equipment.
- KTI-81632 KT INTERNATIONAL 1/2" SUPER TIRE TOOL
- 2" extended shank allows for the use of flip sockets in professional shops
- Back To The Top Of The Page
- Click For Picture
- CPT-731-2 CHICAGO PNEUMATIC 2" EXTENDED ANVIL IMPACT WRENCH- $208.95
- This powerful tire tool has a Double Dog Clutch and a built-in regulator. Also a steel clutch housing.
- CPT-746-2 CHICAGO PNEUMATIC 2" EXTENDED ANVIL IMPACT WRENCH- $250.38
- This fast, rugged wrench has power to spare. It features a Dyna-Pact Clutch which increases ultimate Torque and provides smooth operation under heavy loading.
- CPT-748-2 CHICAGO PNEUMATIC 2" EXTENDED ANVIL STEALTH TEC(tm) IMPACT WRENCH- $174.95
- Composite housing makes wrench lighter, tougher, and warmer feeling than metal tools. Dyna-Pact II clutch provides excellent power-to-weight ratio.
- IRC-231-2 INGERSOLL-RAND 1/2"SUPER DUTY AIR IMPACT WRENCH WITH 2" EXTENDED ANVIL- $227.95
- Gives you the same high quality advantages of the IRC-231, with a 2" extended anvil for use with flip sockets. Ideal for tire shops, or wherever extra reach is needed.
- IRC-2131-2 INGERSOLL-RAND 1/2" ULTRA DUTY AIR WRENCH WITH 2" EXTENDED ANVIL- $279.95
- The ultimate in power and control for tire changing. Professional touch trigger. super strong composite housing with steel hammer case.
- Back To The Top Of The Page
- Click For Picture
- CPT-734 CHICAGO PNEUMATIC 1/2" HEAVY DUTY AIR WRENCH- $161.95
- C-P's most popular 1/2" drive impact wrench. It combines its compact size and light weight with an ultimate torque of 375 ft/lbs. at 90 PSI to meet a wide range of applications. It is ideal for overall automotive service, body shop, farm and light truck work. Features Dyna-Pact clutch, built-in regulator, supported ring socket retainer, scuff guard protects the nose of tool and work piece. Single-handed operation for direction change, positive action trigger. Well balanced for easy handling.
- CPT-747 CHICAGO PNEUMATIC 1-2" PREMIUN BLACK(tm) IMPACT WRENCH- $169.95
- Delivers more power than you will ever need. Engineered with light Stealth Tec(tm) housing for great balance, less user fatigue and more gun durability. Specially designed motor is self lubricating and resistant to wear.
- CPT-746 CHICAGO PNEUMATIC 1/2" IMPACT WRENCH- $244.33
- The fast, rugged tool has power to spare. It features a Dyna-Pact clutch which increases ultimate torque and provides smooth operation under heavy loads. Can handle the tough jobs like suspension, frame and engine work. Tease throttle, built-in regulator.
- IRC-244 INGERSOLL-RAND 1/2" SUPER DUTY AIR IMPACT WRENCH- $299.95
- The most powerful 1/2" production gun available. For tire changing, spring work, front end, shock and other heavy automotive and truck work. twin hammer impact mechanics, produces 500 ft/lbs. of power, smooth blows. Pressure-feed lubrication system automatically greases the impact mechanism for longer wear. Also features excellent balance, variable speed trigger and built-in power regulator.
- IRC-2131 INGERSOLL-RAND 1/2" ULTIMATE DUTY AIR IMPACT WRENCH- $269.95
- World's most powerful 1/2" air wrench. Unique super strong composite housing with steel hammer case provides lightweight construction with even balance and compact profile for superior comfort. Professional Touch Trigger.
- IRC-235 INGERSOLL-RAND HEAVY DUTY IMPACT WRENCH- $189.95
- KTI-81575 KT INTERNATIONAL 1/2" HIGH PERFORMANCE IMPACT
- If you need power in a tight work area, then you have come to the right tool. Plunger type reverse valve for hand operation and pin clutch provides high torque and fast run down. Applications - Overall automotive service, body shops, small truck repairs, production line work, transmissions.
- KTI-81674 KT INTERNATIONAL 1/2" HIGH PERFORMANCE IMPACT
- The fastest zero to maximum torque output clutch on the market today. No clutch mechanism available today will produce faster torque output on "Hard" metal to metal joints. Comfort grip, plunger type reverse valve, independent power regulator, outstanding tool balance combined with the fastest and most powerful tool in its class. Applications - overall automotive service, body shops, farm equipment, small truck repairs, production line work, transmissions, manufacturing lines. l
- KTI-81644 KT INTERNATIONAL 1/2" TORQUE LIMITING IMPACT WRENCH
- This was designed specifically to , Eliminate broken studs and bolts. Eliminate warped disc brakes and rotors. Eliminate over tightening.
- Back To The Top Of The Page
- Click For Picture
- CPT-772 CHICAGO PNEUMATIC 3/4" HEAVY DUTY AIR WRENCH- $554.95
- More features, power and durability have been packed into this economical wrench. It has 375 ft/ibs. of maximum torque and handle exhaust. Full power in both directions and a tease trigger. high output impact mechanism. one year limited warranty.
- Small, compact size makes it easy to use in truck shops where maximum torque is needed. Exceptionally good for truck engine work, pinion nuts, light spring work, tractor pads or anywhere else a 3/4" air wrench is needed. Features supported ring socket retainer, positive action trigger, energy efficient air motor.
- CPT-774 CHICAGO PNEUMATIC 3/4" EXTRA HEAVY DUTY IMPACT WRENCH- $579.95
- This wrench has a power regulator to match torque to the job. the handle exhaust reduces noise and directs air away from work area. Variable speed trigger gives precise control.
- CPT-775 CHICAGO PNEUMATIC 3/4" EXTRA HEAVY DUTY AIR IMPACT WRENCH- $709.95
- This tool has a hard hitting 2-jaw clutch and a high performance motor in a compact lightweight housing. It has the power to quickly remove stubborn fasteners, and the durability to withstand constant operation. Built-in air regulator, push through reverse valve, rubber scuff guard.
- IRC-251 INGERSOLL-RAND 3/4" STANDARD DUTY AIR IMPACT WRENCH- $589.95
- This economical wrench can br used for farm implement work, engine teardowns and general heavy maintenance. Built-in regulator, single handed operation for forward/reverse direction changes. Steel hammer case protects tool, oil bath lubrication of hammer mechanism insures long, trouble-free performance.
- IRC-255A INGERSOLL-RAND 3/4" DRIVE HEAVY DUTY AIR IMPACT WRENCH- $
- This tool combines the shear power required for 3/4" drive applications with reduced weight and increased comfort. It has a 4 position power regulator, handle exhaust and 360 degree swivel inlet.
- IRC-261 INGERSOLL-RAND 3/4" SUPER DUTY AIR IMPACT WRENCH- $759.95
- Combines compact size with most powerful 3/4" drive output. perfect for spring work, pinion nut and track pad removal and major engine teardowns. Features trouble-free pressure-feed lube system, powerful jumbo hammer mechanism and handle exhaust that directs air away from you.
- IRC-261-6 INGERSOLL-RAND 3/4" SUPER DUTY WRENCH WITH 6" EXTENDED SHANK- $769.95
- Same great features as the IRC-261 super duty tool. Also features 6" extended anvil to-reach lug in deep truck wheels.
- KTI-81706 KT INTERNATIONAL 3/4" STANDARD DUTY IMPACT WRENCH
- This tool is ideal for general assembly, maintenance of trucks, buses etc. It features a complete tool boot, power regulator, teasing trigger and "ROCKING DOG" clutch.
- KTI-81772 KT INTERNATIONAL 3/4" HIGH PERFORMANCE IMPACT
- With the high torque developing clutch this tool is perfect for assembly work, maintenance of truck, buses, RVs, farm machinery and construction equipment.
- KTI-81775 KT INTERNATIONAL 3/4" HEAVY DUTY HIGH POWER IMPACT
- The ultimate in 3/4" impacts with the high power twin hammer clutch which makes this the wrench for all 3/4" applications. Specifically all the hardest jobs such as springs, tractor pad removal, farm equipment, truck tires, truck suspension and construction equipment.
- Back To The Top Of The Page
- Click For Picture
- CPT-796 CHICAGO PNEUMATIC 1" HEAVY DUTY AIR IMPACT WRENCH- $3164.95
- The most powerful air wrench available. It has the best power-to-weight ratio in a 1" air wrench. The compact housing design is excellent for confined areas.
- CPT-797 CHICAGO PNEUMATIC 1" HEAVY DUTY AIR IMPACT WRENCH- $889.95
- This wrench provides plenty of power and durability for the truck tire shop. Durable rocking dog clutch is ideal for tire work. Teasing throttle, convenient reversing valve. energy efficient motor.
- CPT-797-6 CHICAGO PNEUMATIC 1" HEAVY DUTY AIR WRENCH WITH 6" EXTENDED SHANK- $879.95
- This economy priced 1" drive wrench provides plenty of power and durability for the truck tire shop. Ring socket retainer for ease in changing sockets, dead handle for easy control. Extra power for tire work on trucks and heavy equipment. features durable rocking dog clutch and teasing throttle for easy bolt starting.
- IRC-271 INGERSOLL-RAND 1" SUPER DUTY AIR IMPACT WRENCH- $759.95
- Combines a very compact size with high power output, making it ideal for tire changing, spring and shock work, pinion nut and tractor pad removal. Dead handle makes it easy to maneuver, built-in pressure-feed lube system means longer service life, and jumbo hammer mechanism delivers lots of power with less vibration.
- IRC-280-6 INGERSOLL-RAND 1" SUPER DUTY AIR IMPACT WRENCH WITH 6" EXTENDED ANVIL- $1314.95
- Jumbo hammer mechanism delivers the brute force necessary for high production tire changing. easily reaches into deep truck wheels with 6" extended anvil.
- IRC-285-6 INGERSOLL-RAND 1" HEAVY DUTY EXTENDED ANVIL AIR IMPACT WRENCH- $929.95
- This economical 1" wrench is designed for truck tire changing. Standard 6" extended anvil, four position built-in power regulator. Includes convenient side handle. Lightweight for minimum operator fatigue.
- IRC-291 INGERSOLL-RAND 1" HEAVY DUTY AIR INPACT WRENCH- $894.95
- This economical 1" wrench is designed for close quarter spring work, tractor pads and general repair of off-road equipment. Compact design enables it to be used on spring U-bolt work. Four position built-in power regulator. lightweight for minimum operator fatigue.
- KTI-81797 KT INTERNATIONAL 1" HEAVY DUTY IMPACT WRENCH
- Develops up to 1200 FT/LBS. with it's twin cam double blow impact mechanism and 6 vane air motor.
- KTI-81798 KT INTERNATIONAL 1" HEAVY DUTY IMPACT W/6" EXTENDED ANVIL
- Same as 81797 with 6" extended shank
- Back To The Top Of The Page
- MINI DIE GRINDERS
- Click For Picture
- CPT-876 CHICAGO PNEUMATIC MINI STRAIGHT DIE GRINDER- $72.95
- This compact tool has a built-in regulator, a lock-off throttle, is low in weight and includes 1/4" collet.
- SLP-3125 ST. LOUIS PNEUMATIC MINI STRAIGHT DIE GRINDER- $99.95
- This reduced size die grinder is rugged, made in the USA and includes 1/4" collet and a safety throttle level. Two year warranty.
- STRAIGHT DIE GRINDERS
- CPT-872 CHICAGO PNEUMATIC STRAIGHT DIE GRINDER- $77.00
- This versatile tool has a rear exhaust and a built-in regulator. It includes 1/4" collet and has a lock-off throttle.
- CPT-860 CHICAGO PNEUMATIC HEAVY DUTY DIE GRINDER- $159.10
- Exceptionally versatile tool for jobs like tire scuffing, cleaning tire moldings, porting and relieving engines, general high speed polishing and grinding. Useful in confined areas. Lock-off throttle prevents accidental operation. Features rear exhaust, and ball bearing construction.
- SLP-3025 ST. LOUIS PNEUMATIC HEAVY DUTY DIE GRINDER- $84.95
- Designed for many material removal jobs. Handles accessories with 1/4" shank size. Features 20,000 RPM with rear exhaust and safety throttle level. Made in USA. Two year warranty.
- IRC-308 INGERSOLL-RAND HEAVY DUTY DIE GRINDER- $142.95
- Ball-bearing construction for longer life and highest free speed. Designed for porting, light weld grinding and breaking sharp edges. Self-locking throttle prevents accidental operation.
- KTI-87132 KT INTERNATIONAL REAR EXHAUST DIE GRINDER
- This die grinder features a sturdy 1/2 h.p. motor, built-in power regulator, variable speed throttle control and full ball bearing construction. Standard with a 1/4" collet.
- KTI-87125/KTI-87126 KT INTERNATIONAL MINI DIE GRINDER AND ANGLE DIE GRINDER
- These die grinders feature full bearing support air motors. Standard with a 1/4" collet. Rear exhaust independent power regulator and variable speed throttle. Angle head is full bearing construction with a grease fitting for external lubrication.
- Back To The Top Of The Page
- Click For Picture
- CPT-875 CHICAGO PNEUMATIC AIR ANGLE DIE GRINDER- $89.95
- This compact, low weight tool has a built-in regulator and a lock-off throttle. It includes 1/4" collet. great to use in tight spaces.
- SLP-3150 ST. LOUIS PNEUMATIC MINI ANGLE HEAD DIE GRINDER- $149.95
- Compact design works grat in confined areas. It has a rear exhaust. Its 20,000 RPM provide high performance for general applications of grinding, polishing and deburring. Includes 1/8" collet and safety throttle level. Made in USA. two year warranty.
- IRC-302 INGERSOLL-RAND ANGLER DIE GRINDER- $199.95
- Durable and long-lasting, with an all-ball-bearing construction and precision machined steel gears. Industrial rated. Designed for grinding, porting, polishing, de-burring, and breaking sharp edges. Features a positive grip 1/4" capacity collet chuck.
- AST-T20AH ASTRO PNEUMATIC 1/4" ECONOMY ANGLE HEAD DIE GRINDER- $91.85
- This features a 1/4" positive grip collet, tool is compact and lightweight, and has a lever throttle for feathering control.
- CPT-871 CHICAGO PNEUMATIC HIGH SPEED TIRE BUFFER- $90.13
- This lightweight, high speed buffer comes with a 3/8" Jacobs(R) chuck, and a built-in regulator.
- SLP-6000 ST. LOUIS PNEUMATIC AIR TIRE BUFFER- $84.95
- The 20,000 RPM, rear exhaust performance is ideal for tire surface preparation. Includes two 36 grit cup rasrs and a safety throttle level. Made in USA. Two year warranty.
- CPT-873 CHICAGO PNEUMATIC LOW SPEED TIRE BUFFER- $109.95
- This tool comes with a quick slip chuck 7/16" hex and a lock-off throttle. tha 2500 RPM allows operator maximum control. It has a rear exhaust and a built-in regulator.
- AST-230B ASTRO PNEUMATIC LOW SPEED TIRE BUFFER- $
- This tool delivers 2500 RPM from a 1/3 HP motor 3/8" collet. Quick change chuck permits rapid change of buffing tones.
- KEN-30435 METAL REPLACEMENT WHEEL- $6.69
- For most models of tire buffers
- KTI-87133 KT INTERNATIONAL DIE GRINDER KIT
- Kit features the KTI-87132 1/2 H.P. die grinder and .... 1/8" and 1/4" collet. 5 grinding stones (1/8" arbor). 5 grinding stones (1/4" arbor). 2 wrenches. Heavy duty moldede carrying case.
- KTI-87127 KT INTERNATIONAL DIE GRINDER KIT
- Kit features the kti-87126 angle die grinder and.... 1/8" and 1/4" collet. 5 grinding stones (1/8" arbor). 5 grinding stones (1/4" arbor). 2 wrenches. 2 finishing pads. heavy duty molded carrying case.
- Back To The Top Of The Page
- Click For Picture
- AST-2010 ASTRO PNEUMATIC COMPLETE SURFACE PREP KIT- $111.70
- Kit cleans and polishes engine heads. It is good for detail sanding as well. Components available separately. Kit includes 1/4" angle die grinder, ten 2" surface prep pads with holder, ten 3" surface prep pads with holder: 1/8" collet and 10pc stone assortment.
- AST-2020 ASTRO PNEUMATIC COMPLETE SANDING KIT- $119.00
- Kit is ideal for paint and body shops. Excellent for getting into tight areas. Components available separately. Kit includes 1/4" angle die grinder, ten 2" and ten 3" sanding pads with holders: 1/8" collet with 10 piece stone set.
- AST-230K ASTRO PNEUMATIC 1/4" DIE GRINDER KIT- $66.92
- Kit comes in blow molded case with 1/4" straight die grinder and 10 piece stone assortment and 1/8" collet.
- AST-PK200 ASTRO PNEUMATIC PORTING KIT WITH 1/4" MINI DIE GRINDER- $102.70
- Kit includes everything for engine porting including hard tapered stone, small grinding / polishing rolls, tapered abrasive rolls and butterfly flapper.
- Back To The Top Of The Page
- Click For Picture
- 3/8" DRIVE CAPACITY AIR DRILLS
- CPT-785 CHICAGO PNEUMATIC 3/8" AIR DRILL- $141.80
- This lightweight tool is powered with 1/2 HP max. motor. It delivers 2400 RPM's and easily drills sheet metal, plastic, wood.
- SLP-4138 ST. LOUIS PNEUMATIC HIGH SPEED AIR DRILL- $86.95
- This features 20,00 RPM vibrationless performance. Lightweight pistol grip design is useful in many operations. Made in USA. Two year warranty.
- SLP-4038 ST. LOUIS PNEUMAITC HEAVY DUTY IN-LINE AIR DRILL- $84.95
- 20,000 RPM performance with rear exhaust is ideal for many operations. Will handle any 3/8" shank accessory. Equipped with safety throttle lever. Made in USA. Two year warranty.
- IRC-7801 INGERSOLL-RAND 3/8" SUPER DUTY AIR DRILL- $139.95
- This powerful tool is the choice of mechanics for high quality and long lasting air drills. Variable speed throttle for easy starting. Handle exhaust directs air away from work.
- IRC-7802 INGERSOLL-RAND 3/8" HEAVY DUTY AIR DRILL- $175.95
- Variable speed throttle for ease of starting holes. Compact and lightweight for easy handling. Planetary gear reduction balances load on bearings and gears to increase tool life. Positive action trigger stop to reduce maximum speed when desired.
- KTI-84218 KT INTERNATIONAL 3/8" AIR DRILL
- Lightweight whisper quiet 3/8" drill, with all ball and needle bearing spindle component support and machined planetary gearing.
- Back To The Top Of The Page
- Click For Picture
- REVERSIBLE DRIILS
- CPT-788R CHICAGO PNEUMATIC 3/8" HEAVY DUTY DRILL- $237.95
- It has triplke planetary gearing for smooth operation and extended life: convenient reverse valves for one hand operation. Exhaust through handle reduces noise and directs away from work area.
- IRC-7802R INGERSOLL-RAND 3/8" HEAVY DUTY REVERSIBLE AIR DRILL- $229.95
- Designed for drilling, honing, reaming, hole sawing and other general purpose applications. the reversible motor offers the additional advantage of driving and removing screws. Quick-reverse lever, variable speed throttle for ease of starting holes. Compact, lightweight for easy handling. Planetary gear reduction balances load on bearings and gears to increase tool life. Positive action trigger stop to reduce maximum speed when desired.
- AST-525T ASTRO PNEUMATIC 3/8" ECONOMY AIR DRILL- $
- Provides full power in forward and reverse. Equipped with a built-in muffler for noise reductions, light weight compact size for easy handling. Planetary gear system for long life.
- ANGLE DRILLS
- CPT-879 CHICAGO PNEUMATIC 3/8" ANGLE HEAD REVERSIBLE DRILL- $135.00
- this has a throttle for precise control. It has a 3/8" Jacobs(R) chuck. Low head profile of 3-1/2". Rear exhaust and very compact.
- IRC-7804R INGERSOLL-RAND 3/8" SUPER DUTY ANGLE HEAD REVERSIBLE DRILL- $299.95
- Variable speed lever throttle adds precision for all applications. Forward/reverse control locks in both positions to prevent accidental change. Powerful 1/2 HP motor delivers 1200 RPM free speed.
- AST-510AHT ASTRO PNEUMATIC 3/8" ANGLE HEAD REVERSIBLE DRILL- $134.90
- 2 gear drive system. Compact design provides close clearance. Lightweight for fatigue free handling.
- KTI-84230 KT INTERNATIONAL 3/8" REVERSIBLE ANGLE DRILL
- A variable speed lever throttle adds percision for all applications. This tool has rear exhaust and forward/reverse control locks in both positions to prevent accidental direction change
- KTI-84228 KT INTERNATIONAL 3/8" REVERSIBLE DRILL
- Features through handel muffled exhaust, controllable speed through the teasing trigger and all ball and needle bearing component support.
- Back To The Top Of The Page
- Click For Picture
- 1/2" AIR DRILLS
- IRC-7803 INGERSOLL-RAND 1/2" HEAVY DUTY AIR DRILL- $309.95
- This economical 1/2" drill is designed for drilling, hole sawing and cylinder honing. Double reduction planetary gearing, variable speed throttle for easy starting of holes. Positive action trigger stop to reduce maximum speed when desired. Auxilliary side handle standard, ball and needle bearing for long life.
- IRC-7803R INGERSOLL-RAND 1/2" HEAVY DUTY REVERSIBLE AIR DRILL- $329.95
- Same powerful features as IRC-7803 with reversible action to back out the tightest screws.
- SPOT WELD DRILL
- AST-721 ASTRO PNEUMATIC 8mm SPOT WELD DRILL- $285.69
- This drill has a chuck capacity of 8mm and an adjustable depth stop to insure no damage to unlying panel. This drills out the entire spot weld eliminating the need for grinding.
- KTI-84219 KT INTERNATIONAL 1/2" H.D. DRILL
- This 1/2" drill in unsurpassed with its controllable speed through the teasing trigger, heavy duty motor and all ball and needle bearing support.
- KTI-84229 KT INTERNATIONAL 1/2" HEAVY DUTY REVERSIBLE DRILL
- This 1/2" reversible drill is unsurpassed with its whisper quiet through handle exhaust controllable speed through the teasing trigger and ball and needle bearing spindle component support.
- Back To The Top Of The Page
- Click For Picture
- 1/4" CAPACITY DRILL & ADHESIVE REMOVER DISCS
- BDT-1042 BLACK & DECKER 1/4" HEAVY DUTY DRILL, VARIABLE SPEED- $230.00
- Can be used with 3M Scotch Brite molding and Stripe Removal System, where 4,000 RPM's are required. Removes adhesives in minutes without scratching or blistering paint. 0-4,000 RPM.
- 3/8" CAPACITY DRILLS
- BDT-1165 BLACK & DECKER 3/8" STUBBY DRILL- $239.00
- Designed exclusively for tight working areas. An indispensable right angle tool for body shops and accessory installation specialists. Includes chuck key and holder. double reduction gear for full power output. 1200 RPM.
- BDT-1166 BLACK & DECKER 3/8" VARIABLE SPEED REVERSING DRILL- $114.00
- Heavy duty 3/8" chuck for positive bit retention, variable speed reversing switch, 3/8" capacity-hardwood. Ball bearings for smooth operation, high air-flow motor, 8 ft. rubber power cord. Standard equipment includes chuck key and chuck key holder. 0-250 RPM.
- MKT-6405 MAKITA 3/8" VARIABLE SPEED REVERSING DRILL- $98.69
- Powerful motor for diverse applications and production work. Features all ball-bearing construction for long tool life, double insulation for safety, and reversible switch with lock button for removing screws. Standard equipment includes chuck key, and chuck key holder.
- BDT-7157 BLACK & DECKER 3/8"VARIABLE SPEED REVERSIBLE DRILL- $83.95
- This powerful 3.0 amp drill has a keyless chuck and variable speed from 0-1200 rpm. It is reversible to back out screws or jammed bits. It has a recessed lock button for safety and continuous use.
- 1/2" CAPACITY DRILLS
- BDT-2610 BLACK & DECKER 1/2" REVERSING DRILL- $286.00
- Powerful 7 amp AC/DC motor, 1/2" chuck size, 1/2" - 20 spindle diameter and thread. 450 rpm no-load speed, triple gear reduction. On/off reversible speed control, ball and roller bearings for smooth operation. metal gear housing high air-flow motor, 3 position auxiliary top handle for maximum control. 1/2" capacity - mild steel, 2-9/16" capacity - hardwood. Standard equipment includes chuck key, chuck key holder, and handles.
- Back To The Top Of The Page
- Click For Picture
- 7.2 VOLT DRILLS
- MKT-6172DW MAKITA 3/8" 2-SPEED, VATIABLE, REVERSIBLE DRILL- $179.62
- Versatile cordless driver-drill featuring 2-speed gear selection (0-250RPM) or (0-600RPM), keyless chuck, compact and lightweight for easy handling. Electric brake. Includes battery, charger and tool case.
- BDT-1922CB BLACK & DECKER 3/8" DRILL, REVERSIBLE, VARIABLE SPEED- $204.00
- Features fan-cooled, 85 watt high torque motor for durability. Comes with one-hour charger and battery.
- MKT-DA301DW MAKITA 3/8" ANGLE DRILL, VARIABLE SPEED REVERSIBLE- $314.75
- Ideal for close quarter drilling. Built-in overload protection reduces motor burnout. Comes with replaceable battery, 1-hour fast charger and plastic storage case.
- 9.6 VOLT DRILLS
- BDT-PS330 BLACK & DECKER 3/8" VARIBLE SPEED CORDLESS CYCLONE(tm) DRILL- $141.95
- This powerful 9.6 volt drill has a variable speed from zero to 700 RPM. It has a keyless chuck and six position clutch for excellent torque control. It has a level for precision drilling with a sleek, ergonomic design.
- BDT 2755K-2 BLACK & DECKER 3/8" ADJUSTABLE CLUTCH DRILL/DRIVER- $238.00
- This Cyclone(tm) drill comes with a 1 hour charger. The no load speed is 0-400 and 1,200 RPM. It has a fan cooled, high output motor and a keyless chuck. Ball and roller bearings for smooth operation and long life. Includes metal box and two batteries.
- BDT-2764-K2 BLACK & DECKER 3/8" DRILL, TWO VARIABLE SPEEDS, REVERSIBLE- $309.00
- Powerful fan-cooled motor for tough performance and long life under heavy duty work requirements. Comes with replaceable battery, one-hour fast charger, and steel storage case, keyless chuck.
- MKT-6093DW MAKITA 3/8" DRILL 2 VARIABLE SPEEDS, REVERSIBLE- $285.40
- The most versatile tool available. Features overload protector to safeguard your motor, electric brake for fast-stopping chuck and 12-position torque clutch for different screw sizes. Includes replaceable battery, one-hour fast charger and plastic storage case.
- 12.0 VOLT DRILL
- BDT-2852K BLACK & DECKER 3/8" SUPER CYCLONE(tm) CORDLESS DRILL- $362.00
- This 12 volt adjustable clutch drill/driver packs a lot of power. It delivers 0-450 and 1,400 no load RPM. The adjustable clutch allows for 16 different torque settings for really fine control. Built with ball and roller bearings for smooth operation.
- 14.4 VOLT DRILL
- BDT-2874K BLACK & DECKER SUPER CYCLONE(tm) 3/8" VERSA CLUTCH- $388.00
- This drill/driver comes with a 1 hour charger and it's built with ball and roller bearings for long life. The two variable speed ranges of 0-400 and 0-1,400.
- DRILL CHUCKS & KEY ACCESSORIES
- JACOBS(tm)KEYLESS CHUCKS - VERMONT-AMERICAN PROFESSIONAL QUALITY KEYED CHUCKS - DRILL CHUCK KEYS - MASTER CHUCKS I & II.
- Back To The Top Of The Page
- Click For Picture
- CPT-711 CHICAGO PNEUMATIC REGULAR DUTY AIR HAMMER- $63.96
- This high speed, lightweight, economy priced Zip Gun(R) is a popular choice for muffler and pipe removal, body shop work, shock work, scraping rust and light front end work. Quick-change retainer for simple accessory changes. Heat-treated impact parts for durability. Comfortable handle.
- CPT-715 CHICAGO PNEUMATIC GENERAL PURPOSE AIR HAMMER- $80.62
- This economy priced, general purpose Zip Gun(R) is an excellent tool for rivet and bolt cutting, bushing driving and overall front end work. Longer piston strokes for more force per blow. Zip Quick retainer for simple accessory changes. Integral muffler minimizes exhaust sound. Heat-treated impact parts for durability.
- CPT-717 CHICAGO PNEUMATIC EXTRA HEAVY DUTY AIR HAMMER- $802.75
- This powerful Zip Gun(R) handles volume front end work, king pin removal, installation and removal of buildozer walking beam bushings, removal of truck anchor springs and heavy duty spring bushings. Best for heavy cutting, ripping and driving. Quick-Change retainer, positive action trigger for precise speed control.
- IRC-116 INGERSOLL-RAND STANDARD DUTY AIR HAMMER- $65.95
- Economical air hammer designed for medium exhaust system, panel cutting and general repair work. Handles a wide range of cutting applications. Alloyed steel barrel and heat-treated piston for longer life. Trigger control, built-in power regulator.
- IRC-117 INGERSOLL-RAND STANDARD DUTY AIR HAMMER- $77.95
- Economical air hammer with a longer piston stroke. Designed for exhaust work, bolt cutting and front end work. alloyed steel barrel and heat-treated piston for long life. trigger control, built-in power regulator.
- IRC-121 INGERSOLL-RAND SUPER DUTY AIR HAMMER- $139.95
- Makes fast work of body panel crimping and cutting, bushing driving, shearing and general front end work. One piece alloy barrel and easy out throttle valve assembly makes this a tough tool thats easy to maintain. The professional touch trigger gives total power control.
- AST-415 ASTRO PNEUMATIC 250mm AIR HAMMER- $
- This general purpose air hammer is easy to handle, is lightweight and compact. It has an air cushion piston to reduce shock and extend operation life.
- KTI-83277 KT INTERNATIONAL REGULATED LONG AIR HAMMER
- Extra long barrel provides a harder hitting blow. Also features independent power regulators, teasing throttle for operator control, all metal 1-piece housing, hardened alloy steel barrel and standard .401" shank opening.
- KTI-83275 KT INTERNATIONAL REGULATED AIR HAMMER
- Features independent power regulators, teasing throttle for operator control, all metal 1-piece housing, hardened alloy steel barrel and standard .401" shank opening.
- Back To The Top Of The Page
- Click For Picture
- ATD 6750 QUICK CHANGE RETAINER SPRING- $1.75
- For .401 shank air tools. Guards against accidental shank release. Interlocking design grips tight yet allows for quick snap changes.
- ATD-6751 SAFETY CHUCK HOLDER- $10.65
- Replaces conventional method of retaining tools. Prevents accidents, locks chisel firmly in place, quick change. Fits all hammers.
- ATD 6752 AIR REGULATOR- $4.55
- For air tools not originally equipped with air regulators. Fits any 1/4" npt female aie inlet opening.
- ATD-6753 AIR CONTROL GAUGE- $12.65
- Adjusts air pressure at the air tool. Ideal for spray guns to avoid costly errors such as poor color match, runs, poor coverage, orange peel, etc. With accurate 0 to 160 psi gauge. Air inlet 1/4" npt. Air outlet 1/4" fpt, swivel fitting.
- ATD-6754 BEEHIVE SPRING- $2.09
- Preferred for maximum possible chisel retention. Ideal where quick change feature isn't needed. Can be used only with narrow headed chisel bits.
- ATD-6755 IN-LINE OILER- $10.55
- A must for all pneumatic tools to insure proper lubrication and long life of tool. Specific lubrication may be easily set. The diaphragm prevents sudden surges of lubricant discharge. 1/4" male x 1/4" female npt fittings.
- ATD-6756 CHISEL HOLDER- $18.89
- For ATD and Chicago Pneumatic .401 shank tools. Threads onto end of gun.
- ATD-6749 CHISEL HOLDER- $16.97
- For Snap-On and Florida Pneumatic .401 shank tools.
- ATD-6759 CHISEL HOLDER- $17.73
- For Ingersoll-Rand and Sioux .401 shank tools.
- PORTABLE AIR TANK
- ATD-9898 9 GALLON AIR TANK- $62.00
- Take it anywhere! This ATD portable air tank is the answer when you need up to 125 psi compressed air in remote locations or small jobs. This tank is an excellent reserve air source for cleaning and inflating. An air line shut-off valve with pressure relief valve, pressure gauge and 4 ft. air hose with an air chuck is included.
- ATD-3000 AIR TANK CONVERSION KIT- $31.69
- Turn your empty freon tank into a usable air tank. No special tools required. Complete parts kit contains filler valve, air gauge, safety valve assembly, air hose assembly, chuck and four-way manifold.
- ATD AIR CHISELS & OLD FORGE CHISELS & CHISEL SETS
- Air Chisels Double Blade Panel Cutter/ Claw Ripper/ Sheet Metal Trimmer/ Spot Weld Breaker/ Straight panel Cutter/ Muffler/Tailpipe Remover/ inside Muffler Cutter/ Outside Muffler Cutter/ Tailpipe cutter/ 3/4" cold Chisel/ 1/2" Cold Chisel/ Scraper/ Tapered Punch/ 7" Chisel Blank/ 1-1/4" Smoothing Hammer. ATD Air Chisel Sets4-Pc. Set/ 4-Pc. Muffler/Tailpipe set/ 9-Pc. All Purpose Set. Old Forge Air Chisels Slotted Panel Cutter/ Sheet Metal Trimmer/ 6" Cold Chisel/ Rivet and Bolt Cutter/ Scraper/ tapered Punch/ Pneumatic Hammer.
- Back To The Top Of The Page
- Click For Picture
- CUTOFF TOOLS
- CPT-861 CHICAGO PNEUMATIC HI-SPEED CUTTER- $138.96
- A popular addition to CP's body shop line. Great for effortless cutting through sheet metal, fiberglass, bolts, muffler clamps and hangers. Also grinds down burrs and rough edges. features 20,000 RPM free speed, 1/2 h.p. motor, built-in regulator, rear exhaust, and ball bearing construction. 2-7/8" max. wheel diameter, 5 cfm average air consumption, 1/4" npt air inlet, 82 sound level (dBA). 7-3/4" overall height, weight 1 lb. 10 ozs.
- CPT-874 CHICAGO PNEUMATIC CUT OFF TOOL- $79.95
- This lightweight tool is ideal for cutting exhaust, panels etc. It has a rear exhaust to keep air away from work area. It comes with a built-in regulator and a lock-off throttle for safety.
- IRC-326 INGERSOLL-RAND HEAVY DUTY AIR CUTOFF TOOL- $85.95
- Designed especially for muffler and tailpipe work also works well on rusted U bolts and sheet metal. Features a built-in regulator, safety lever throttle and a 360 degrees chrome-plated spark guard. 18,000 rpm, weight 2-3/8 lbs., 10 cfm, 2-7/8" max. wheel diameter.
- SLP-2030 ST. LOUIS PNEUMATIC CUTOFF TOOL- $84.95
- This tool has a rear exhaust and a 20,000 rpm rating. The die cast aluminum wheel guard swivels 360 degrees and locks in place. It is equipped with a OSHA approved safety throttle lever.
- ABRASIVE CUTOFF WHEEL ACCESSORIES
- Excellent quality at unbeatable prices. Wheels fit Ingersoll-Rand, Chicago Pneumatic and all other leading brands of air cutoff tools. Size 2-7/8" diameter, 3/8 arbor hole.
- AIR RECIPROCATING SAWS
- CPT-880 CHICAGO PNEUMATIC RECIPROCATING SAW- $148.10
- This saw comes complete with blades and delivers 10,000 strokes per minute. It has a quick change positive blade holder and an adjustable built-in guard/guide. It has rear exhaust and weighs 12-1/2 lbs.
- CPT-881 CHICAGO PNEUMATIC HEAVY DUTY RECIPROCATING SAW- $249.95
- This HD saw delivers 9500 strokes per minute with low noise. It has an ergonomic grip and a lock-off throttle for comfort ans safety. It comes with a built-in regulator and weighs 1-5/8 lbs.
- IRC-329 INGERSOLL-RAND HEAVY DUTY AIR RECIPROCATING SAW- $151.95
- For cutting intricate shapes in all types of plastics, fiberglass, composite materials, aluminum and sheet metal. Excellent for body shop repair, muffler and exhaust work, and sun roof installation. Comes with six high-speed steel cutting blades. Specifications: 9,000 spm, 1-5/16 lbs., 8 cfm.
- AST-129TW ASTRO PNEUMATIC AIR SABER SAW- $119.90
- This is ideal for body shops, muffler shops, and general repair shops. The adjustable blade guide extends blade life. It cuts aluminum, plastic, fiberglass, and sheet metal. 10,000 spm, 7 cfm, weighs 2 lbs.
- AST-5SAW 5 Pc. BLADE SET- $10.90
- Fits all major manufacturers: Astro, Chicago Pneumatic, Ingersoll-Rand, Milwaukee Pneumatic.
- KTI-88329 KT INTERNATIONAL AIR SPEED SAW
- Mini saw makes cutting in confined areas easy. Adjustable guard aids in depth of cut precision. Features lever throttle and built in regulator for positive speed control and lock-off throttle to prevent accidental start ups. Cuts straight and curved surfaces.
- KTI-89330 KT INTERNATIONAL 3/16" PUNCH/FLANGE
- This two-in-one tool features a 360 swivel head for ease or operation. The first operation will crimp (flange up to 14 gauge material together, then turn head of tool 180 degrees to punch a clean 3/16" hole for your welding operation.)
- KTI-89331 KT INTERNATIONAL 5/16" PUNCH/FLANGE
- Similair to the KTI-89330, except that this tool features 20-25% more clamping/punch force than the standard 3/16" punch/flange tool.
- KTI-88255 KT INTERNATIONAL UTILITY/MUFFLER CUT-OFF TOOL
- Cuts through muffler clamps, hangers, sheet metal, radiator hose clamps, rusted bumper bolts and steel rods up to 3/4" thick. Standard equipment includes an abrasive 3" disc cutter, independent power regulator, a hand guard trigger and see thru cutting shield.
- KTI-89275 KT INTERNATIONAL STANDARD DUTY SCALER
- This scaler features 3,500 blows per minute with an extra "kick", teasing trigger and independent power regulator.
- KTI-83280 KT INTERNATIONAL WELD FLUX/NEEDLE SCALER "2 tools in 1"
- This industrial needle scaler converts to a standard scaler in seconds. Simple "J" slot adjustment for needle wear or to provide more needle exposure. Positive lock retainer.
- Back To The Top Of The Page
- Click For Picture
- AIR SHEARS
- IRC-7802S INGERSOLL-RAND AIR SHEAR- $264.95
- Makes clean cuts in cold rolled steel up to 20 gauge without chips. Also shears most types of plastic, and all types of tin. Cuts squares, angles and circles. Ideal for body shops, contractors and machine shops.
- KET-P500 KETT PNEUMATIC POWER SHEAR- $195.00
- Clearly cuts 18 gauge and lighter sheet metal without distortion. Both sides of the cut are left clean with no need to file or di-burr. Variable speed trigger lets you control speed 0-180 inches per minute.
- ELECTRIC SHEAR
- KET-K200 KETT 120-VOLT ELECTRIC SHEAR- $160.00
- Cuts up to 18 gauge mild stell or 20 gauge stainless in straight or contour lines at 180 inches per minute, without warping or bending. Also cuts up to 3/32" thick plastic.
- AIR NIBBLERS
- CPT-835 CHICAGO PNEUMATIC AIR NIBBLER- $240.78
- This lightweight, fast cutting tool is idealy suited for body shop applications. A breakthrough in cutting speed and durability. Precision planetary gearing, rugged nibbler head and .177" diameter punch. Cuts steel up to .060" (16 gauge) and aluminum up to .102 (10 gauge). Easy access to punch and die for quick replacement. Adjustable die can be placed in four cutting positions to best suit applications. Four bolt construction, makes it possible to place throttle in four different positions. Teasing throttle, rear exhaust, 1/2 h.p. air motor, 2,750 strokes per minute. 6.2 ft/min. cutting speed, 4 scfm average air consumption, 1/4" air inlet. Overall length 7.5", weight 2.2 lbs.
- IRC-325 INGERSOLL-RAND HEAVY DUTY AIR NIBBLER- $204.95
- Ideal for paint and auto body shops, tinsmiths and sheet metal shops. Cuts out quarter panels and other metals up to 18 gauge without distortion. Also great for plastic, tin and aluminum. Designed so you can start cuts in the center of a panel and hold a tight 1/4" radius. 4cm, weight 3 lbs.
- Back To The Top Of The Page
