last update 11/2/05
Welcome to Bernie's Automotive Products
5% Off! All Orders
(Special not included)
Please email any questions about any products listed or not
listed. Need a picture? a price or shipping and handling prices. We are in
business to do business so lets hear from you!
- prices do not include shipping & handling
- Secure Server for transactions at bottom of page
AUTOMATIC TRANSMISSION TOOLS
- TRUCK PINION LOCKNUT SOCKETS
- A thin walled socket for removing and installing the transmission and differential end
yoke locknuts. Sockets have 3" of usable depth, 4" overall length. All sockets
are 6 point. Use with 3/4" square drive, manually operated handles only. OTC-1975($102.95)
2", OTC-1976($102.95) 2-1/8", OTC-1977($102.95) 2-1/4", OTC-1981($102.95)
2-1/2", OTC-1978($102.95) 2-3/8", OTC-1979($102.95) 2-5/8",
OTC-1980($102.95) 2-3/4".
- ATD-5550 ATD OIL PRESSURE GAUGE KIT- $46.09
- Used to determine whether oil pressure is within car manufacturers specifications, and
as an aid in diagnosing various transmission troubles. Especially useful where car has an
indicator light instead of an oil gauge on the instrument panel. Includes gauge that reads
up to 300 lbs. pressure, 6' oil proof hose and necessary fittings and adapters. Comes in
vinyl pouch. ATD-5551 replacement oil pressure gauge, ATD-5552 Replacement hose, ATD-5553
low pressure oil pressure gauge.
- KDT-2393 K-D TOOLS TRANSMISSION SEAL REMOVER & INSTALLER- $24.26
- For GM transmissions. Removes and installs transmission shift selector shaft seals
without draining fluid. Screw cone shaped threads into seal and tighten remover screw to
pull worm seals. place installer over new seal and selector shaft and tap with hammer to
install.
- CEN-6400 CENTRAL TOOLS UNIVERSAL DIAL INDICATOR SET- $93.87
- For automatic transmissions. Determines backlash, out-of-round conditions, etc. Range
.200" calibrated to 0-100" in .001 increments. Fitted plastic case.
- OTC-7024 OTC AUTOMATIC TRANSMISSION CLUTCH SPRING COMPRESSOR- $102.95
- For removing and installing the transmission rear clutch piston snap ring. Adjustable
for most models of American cars and light trucks. Applies pressure to the retaining
washer in the clutch drum to compress clutch piston return springs in order to remove or
install snap ring during clutch repair or overhaul.
- KDT-2547 K-D TOOLS TRANSMISSION STOP-OFF TOOL- $7.66
- Eliminates the need to drain transmission fluid when making repairs or replacing drive
shaft U-joints. Tool plugs transmission drive shaft opening reducing transmission fluid
waste. Fits most domestic rear wheel drive cars.
- OTC-7244 OTC FORD TRANSMISSION QUICK DISCONNECT COUPLER TOOL- $15.95
- Removes push lock connectors found at both the transmission, power steering lines, and
radiator connections on '83 - current Ford and GM vehicles.
- Back To The Top Of The Page
ENGINE TOOLS
- KDT-3259 K-D TOOLS UNIVERSAL VACUUM PVS, TVS VALVE & OXYGEN SENSOR SOCKET- $23.04
- Specially designed socket for removal and replacement of vacuum switches with 7/8"
hex currently found on Ford, GM, Chrysler, and some imported vehicles. Tool can also be
used to remove and replace some oxygen sensors. Use with a 1/2" square drive tool or
7/8" wrench.
- THX-373 THEXTON UNIVERSAL OXYGEN SENSOR SOCKET- $23.12
- Removes and installs oxygen sensors on computerized engine controlled vehicles. designed
for hard-to-reach places. use with 1/2" drive ratchet or wrench. may also be used
with torque wrench. socket is heat-treated and thick-walled.
- THX-396 THEXTON FORD TFI MODULE SOCKET- $7.34
- Works on all Ford/mercury/Lincoln vehicles with TFI (Thick film Ignition) modules with
5.5mm hex bolt. Special depth 1/4" drive 5.5mm socket is used to loosen and tighten
hard to reach module hold down screws where a standard or deep well socket will not work.
Also may be used with a 3/8" open end wrench. Heat treated for durability.
- OIL PRESSURE AND STOP LIGHT SWITCH SOCKETS
- Removes oil pressure sending unit switch on most engines. 3/8" drive socket has
1" and 1-1/16" hex opening plus recess to accomodate switch. Also fits some
brake light switches. Can be turned with a 15/16" wrench. KDT-2569($6.83) K-D
TOOLS, SKT-44889($9.45) S-K HAND TOOLS.
- ATD-318 ATD MECHANIC'S SONARSCOPE- $11.23
- Effective whenever trouble can be traced by sound. Can easily locate and isolate
troubles in engines and other moving parts by listening for sound of flowing, gas, oil,
etc.
- KDT-835 K-D TOOLS MECHANIC'S STETHOSCOPE- $18.49
- Locates source of engine noise quickly. Listen for trouble by tracing sound of flowing
water, oil gas or steam. Identify piston slap, worn gears, faulty valves, water pump
failure, damaged gaskets and defective bearings. Handle is shockproof. Disassembles for
storage.
- ATP-AT100 ELECTRONIC STETHOSCOPE- $49.95
- Simple to use. Just put on the headphones, turn on the amplifier, and touch the
suspected problem part; your ears will hear the problem. Quickly and accurately pinpoints
the problem for a correct first time repair.
- ATD 5270 ATD FREEZE PLUG INSTALLATION TOOL- $75.58
- Reach those stubborn freeze plugs. No need to remove head or manifold. 5 special
machined head adapters fit most freeze plugs. Durable high carbon steel, fully plated.
Formed shaft is 18" long with knurled ring nut. Adapter sizes 3/4", 1",
1-1/4", 1-1/2" and 1-3/4".
- THX-368 THEXTON GM IDLE AIR PASSAGE PLUGS- $5.99
- For Throttle Body Injection (TBI) system with Idle Air Control Valve (IACV), seals off
idle air passages for for minimum idle adjustment on TBI systems. Two plugs are required
for cross-fire injection. Made of soft plastic with T-handle for convenience.
- KDT-2270 K-D TOOLS FLYWHEEL TURNER- $29.91
- Hook tool into flywheel teeth to rotate crankshaft. Use when working on clutches,
transmissions, installing rings or other jobs that require the crankshaft to be in a
specific position. Spring tension holds tool onto flywheel.
- KDT-3284 K-D TOOLS UNI-STRAP(R)- $49.73
- Designed to allow the crankshaft, camshaft and other like pulleys to be retained while
removing or installing the fastener that holds them in place. This tool can also be used
to hold or move other objects as needed, ie: alternators, power steering pumps, air
conditioner compressors, mufflers, and oil filters found on large trucks. It has more
functions than a standard strap or chain wrench and will not damage components. Use with
1/2" drive tool, or extension handle included.
- LIS-25500 LISLE FLEXPLATE WRENCH- $17.45
- Works on GM transverse mounted engines where spanner type tools won't fit. Adjustable
grippers fit both wide and narrow rims. Works on all flexplates.
- VIM V387 HOOD HOLDER- $17.00
- Features telescoping column and secure trigger lock. Also works well on doors and trunk
lids. Telescopes from 28" to 46".
- LIS-45900 LISLE HOOD PROP- $28.45
- Works on all makes of cars and trucks. The three piece, telescoping design allows the
mechanic to hold the hood in the desired position. The tool telescopes from 18-1/2"
to 46-3/4". Can be used from side of car for better access to the engine compartment.
Also great for body or repair work on doors, trunk lids, or hatchbacks.
- OTC COMPONENT LOCATOR MANUALS FOR COMPUTERIZED ENGINE CONTROLS
- Eliminates time-consuming searches for computer sensors and hard-to-find engine
components. Complete diagram for all makes and models. OTC-103714($39.95) Domestic
1981-91. OTC-103734($43..95) Imports(Asian).
- LIS-13750 LISLE HYDRAULIC LIFT PULLER -$32.45
- Removes stuck hydraulic valve lifters. Expanding collet firmly grips the tightest
lifters. Special designed slide hammer jars the lifter loose.
- LIS-22550 LISLE ENGINE TILTER -$23.95
- Tilts transverse-mounted GM engines to provide easy access for repair. Works on GM
transverse-mounted engines with engine torque struts. (Dog Bone). This tool tilts and
holds the engine forward, allowing easy access between the engine and the fire wall. Makes
servicing much easier on spark plugs, oxygen sensor, ignition coils, etc. Use with
3/4" deep socket and ratchet.
- LISLE OIL PRESSURE SWITCH SOCKET
- LIS-13200 ($6.45) Fits 1" & 1 1/16" switches up to 1 5/8"
long. Use with 3/8" drive or 1 1/8" hex. LIS-13250($7.95) Fits 1
1/16" switches up to 2 5/8" long, found on newer GM, Chrysler vehicles. Use with
3/8" drive or 1 1/8" hex. LIS-13150($14.95) Fits 1 3/16" oil
pressure sending units. Late-80's/Mid-90's GM vehicles (for vehicle equipped with gauges)
This sending unit is 4 1/4" long and requires an extra deep socket. Use with
3/8" drive or 3/4" external socket.
- LIS-12000 LISLE VACUUM SWITCH SOCKET -$
- Quickly removes and installs vacuum switches on most domestic and some import vehicles.
Special 7/8" socket provides the needed depth and a cutaway slot to provide clearance
for hose connectors. Heat treated alloy steel. Use with 3/8" square drive.
- LIS-12100 LISLE OXYGEN SENSOR SOCKET -$14.45
- Remove and installs oxygen sensors on most domestic and some imports. Special 7/8"
socket with cutaway slot to provide clearance for wire harness. Provides adequate depth to
fit over sensor. Heat-treated alloy steel. Use with 3/8" square drive or 1"
wrench.
- Back To The Top Of The Page
BELT TOOLS
- THX-383 THEXTON SAGINAW POWER STEERING BELT TIGHTENER- $10.49
- Heat-treated steel tool tightens belt on GM type Saginaw pumps. Slips over bracket to
eliminate damage to pump housing. Eight pointed star for use with 1/2" drive ratchet
or breaker bar. Improved design resists breakage.
- LIS-12400 LISLE FAN BELT TIGHTENER- $8.95
- Use with 1/2" square drive socket handle. Works on most alternators and some other
belt driven accessory units. Makes belt tightening an easy, one person job.
- LIS-57800 LISLE SERPENTINE BELT TOOL- $40.95
- Releases tension on serpentine belts with a spring loaded idler pulley. fits idler
pulleys requiring 13mm, 15mm, 16mm, 18mm hex, and both 3/8" and 1/2" square
drive sizes. Also comes with an extension that can be bolted on and set in 11 different
position for hard to reach areas. Covers most applications.
- KDT-3256 K-D TOOLS BELT TENSION TORQUE WRENCH ADAPTER- $15.30
- This tool allows for the adjustment of 10mm timing belt tension bolts to precise factory
specifications. Applications include Ford Escort/Lynx 1.6L and 1.9L engines. Use with
3/8" drive torque wrench. Refer to ford factory service manual for proper torque
specifications.
- KDT-3282 K-D TOOLS CHRYSLER TIMING BELT TENSION TOOL- $31.44
- Use to adjust timing belt tension to manufacturer's specifications on Chrysler 2.2L and
2.5L engines.
- KDT-3283 K-D TOOLS GM CAM DRIVE TIMING BELT TENSION TOOL- $15.30
- Use when adjusting timing belt tension to manufacturer's specification on GM 1.8L and
2.0L engines. Use with 1/2" square drive tool.
- Back To The Top Of The Page
FORD FAN CLUTCH WRENCH SETS
- KDT-3136 K-D TOOLS FORD FAN CLUTCH WRENCH SET- $54.99
- Used to remove and replace the thermostat fan assembly on Ford 4.9L E and F series truck
engines on 1984 through 1987, the 2.9L Bronco II and Ranger engines 1984-1987 and 1988 3.0
Aerostar engine. Use with 1/2" drive tools and torque wrench. Refer to Ford factory
manual for torque specifications and thread direction.
- KDT-3296 K-D TOOLS FORD FAN CLUTCH WRENCH SET, 6.9L & 7.3L- $87.64
- Used to remove and replace the thermostat fan assembly on Ford 6.9L and 7.3L engines.
Use with 1/2" drive tools and torque wrench. Refer to Ford factory manual for torque
specifications and thread direction.
- Back To The Top Of The Page
VALVE SERVICE TOOLS
- KDT-2079 K-D TOOLS HEAVY DUTY HYDRAULIC VALVE TAPPET REMOVER- $38.98
- Removes sticking hydraulic valve tappets. Jaws spread apart to clamp recessed area of
tappet. Sliding hammer removes them. Adapters convert tool to puller for extremely tight
tappets. Turn adjusting nut with 5/8" wrench.
- LIS-13750 LISLE HYDRAULIC LIFTER PULLER- $32.45
- Expending collet provides full circle contact on the lifter to remove even the tightest
lifters on most domestic modules. The slide hammer can be used to jar the lifter loose.
- KDT-2114 K-D TOOLS VALVE TAPPET REMOVER- $22.58
- Removes hydraulic tappets that are not stuck or baked in. Tool allows tappet removal
without removing most manifolds.
- VALVE GRINDERS
- For hand grinding flat head, nonslotted valves. Synthetic rubber vacuum cups are
resistant to oil, grease, gasoline and atmosphere conditions. Replaceable cups have thin
walls for greater suction.
- ATD-215 ATD OIL DEFLECTOR- $6.70
- Deflects oil from the rocker arm to the valve chamber. Sold in sets of 16 so both banks
of valves may be adjusted simultaneously. Includes metal panel for storing.
- LIS-35500 LISLE ROCKER STOPPERS- $7.95
- Spring steel clips with gaskets stop splashing, squirting hot oil while you adjust
clearances. Designed for cars with hollow, oil-fed push rods. Stoppers save up to two
quarts of oil, eliminate fire hazard when hot oil splashes on manifold. Reusable.
- AIR HOLD FITTING SETS
- Fits 14mm and 18mm spark plug holes. Threaded to take standard air hose coupling. Used
to apply air pressure to keep valves closed while servicing single valves. ATD-5568($3.30)
ATD TOOLS, KDT-901($5.72) K-D TOOLS
- 14MM/18MM AIR HOLD EXTENSION HOSES
- 14' long hose fitting incorporates special 14mm and 18mm stepped fitting with O-ring
seals for universal fit and 1/4" NPT fitting fir easy connection to air lines. Ideal
for replacing weak or broken valve springs or valve guide seals without removing head from
engine. Long hose ideal foe reaching deep set spark plug holes. KDT-2992($9.34) K-D
Tools.
- LIS-21100 LISLE LARGE VALVE LAPPERS - LIS-21200 LISLE SMALL VALVE LAPPERS -$5.25
- For hand lapping valves. Thick handles for easy lapping. 21100 has 1 1/8" and 1
3/8" diameter cups for larger valves. 21200 has 5/8" and 13/16" diameter
cups for smaller valves.
- LIS-19700 LISLE VALVE HOLDER -$9.25
- For both 14mm and 18mm spark plug threads. Commonly used when valve springs or valve
stem are replaced. Air pressure helps prevent the valve from falling into the combustion
chamber. Comes with 2-step fitting for both 14mm and 18mm threads. Heavy duty 12"
flexible hose allows easy access to spark plug hole and air supply. Thread fitting to
spark plug hole and other end to air supply.
- Back To The Top Of The Page
VALVE SPRING COMPRESSORS
- KDT-380 K-D TOOLS VALVE SPRING COMPRESSOR- $72.98
- Throat depth 9-3/4". Jaw opening 2-3/4" to 7-3/4". Adjustable jaws and
plunger bar. Plunger bar seats on flat and cup shaped valve heads. Includes offset and
straight jaws.
- KDT-383 K-D TOOLS VALVE SPRING COMPRESSOR JAWS- $82.14
- Will service many V8 valve-in-head engines and many smaller L-head engines if manifolds
are removed. Throat depth 7-1/2". Jaw opening 2-3/4" to 5-7/8". Offset jaw
included.
- KDT-912 K-D TOOLS 8-CYLINDER VALVE SPRING COMPRESSOR- $14.42
- For Chevrolet and Pontiac. Heavy gauge channel steel construction. Use with 14mm or 18mm
air hold fittings. length 12-1/2".
- LIS-23300 LISLE SMALL ENGINE VALVE SPRING COMPRESSOR -$17.45
- For springs 3/4" to 1-1/16". Heavy-duty frame and screw for ridgety. Two jaw
sizes. For Briggs and Stratton, Clinton, Harley Davidson, etc.
- ATD-5420 ATD VALVE SPRING COMPRESSOR- $248.81
- Operates with on-line pressure of 90-125 lbs. and develops pressure equal to three times
the line pressure. Parallel lift will not bend valve stem. For use on all late models
cars, trucks, buses, tractors, marine and industrial engines. Comes with three sets of
jaws.
- ATD-5260 ATD VALVE SPRING COMPRESSOR- $81.48
- Designed for use on automotive truck, tractor, bus and marine L-head and valve-in-head
engines. One simple adjustment with the pin operated screw on the valve sets the clamp for
the balance of the springs. Powerful leverage with cam locking handle for handling the
stiffest springs. height 10-1/2". Width 9-1/2". Comes with ATD-5261 medium
offset jaws.
- KDT-700 K-D TOOLS VALVE SPRING LIFTER- $32.13
- For deep set L-heads. Design of screw type lifter provides a clear view of the valve.
Automatic locking at any height. adjustable jaws.
- KDT-379 K-D TOOLS SMALL ENGINE VALVE SPRING COMPRESSOR- $39.48
- Ideal for Briggs and Stratton, Clinton, and Kohler engines. Consists of KDT-376 Inserter
and KDT-378 Compressor. Compressor has operating handle at rear for more convenient
operation.
- KDT-3087 K-D TOOLS VALVE SPRING COMPRESSOR- $63.89
- Tool compresses valve springs on most overhead valve engines including GM, Ford,
Chrysler, Nissan and Toyota. Jaws adjust to fit over spring retaining washer. An
adjustable handle allows easy clearance in tight areas. Gm adapter included. use no. 3269
Fulcrum Rail if overhead cam is not available.
- ATD-5266 ATD DELUXE VALVE SPRING COMPRESSOR- $44.64
- Shorter overall length is designed to service cars with overhead valves and newer cars
with confined space under hood. Operate by hand, 5/8' socket, or for additional clearance
remove knob and use 5/8" open end or box wrench.
- KDT-2078 K-D TOOLS UNIVERSAL OVERHEAD VALVE SPRING COMPRESSOR- $30.88
- Removes valve springs on most cars with overhead valves without removing cylinder head.
Offset jaws grip valve spring in parallel compression. Tool maintains constant length as
spring is compressed. Use with Air hold Fitting to keep valves in place.
- Back To The Top Of The Page
CYLINDER SLEEVE TOOLS
- OTC-1200 OTC MANUAL SLEEVE REMOVER SET- $499.95
- This manually operated, screw-powered unit removes engine sleeves on more than 450 makes
and models of trucks, buses, tractors, etc. Adapter plates are inserted through bore from
the top, making sleeve removal a one-man operation. Adapter plates, are not included in
the set. weight 26 lbs. (not recommended for Mack engines.) OTC-1201 Conversion Kit
permits the OTC-1200 to handle removal and installation operations.
VALVE RECONDITIONING EQUIPMENT
- CLICK FOR PICTURE
- Back To The Top Of The Page
RING COMPRESSORS
- ATD-5450 ATD DOUBLE BAND PISTON RING COMPRESSOR- $12.25
- For piston diameter 2-1/8" to 5". Compressor height is 3-1/2". Tighten
compressor around piston using key wrench supplied. Thumb release for quick opening.
- KDT-2284 K-D TOOLS HEAVY DUTY PISTON RING COMPRESSOR- $9.99
- For passenger cars with piston 2-1/8" to 5" diameter.
- LISLE RING COMPRESSORS
- LIS-18500($10.95) For small engines and cylinders. 1-1/2" to 3"(38.1 to
76.2mm) range. LIS-19500($10.25) For most passenger cars and light trucks. 2-1/8" to
5" (54 to 127mm) range, height 3-1/2". LIS-20500($12.95) For large trucks and
tractors. 3-1/2" to 7" (88.9 to 177.8mm) range, height 3-1/2".
LIS-21000($27.95) For trucks and tractors. 3-1/2" to 7" (88.9 to 177.8mm) range,
height 7". LIS-21500($29.95) For very large engines. 7" to 10" (177.8 to
254mm) range, height 7".
- LIS-19000 LISLE TAKE-APART RING COMPRESSOR- $14.95
- Provides spring clutch and take-apart feature necessary for Volkswagens, motorcycles,
outboard motors, etc. Fits snugly on piston, yet quick release makes it easy to remove
from around connecting rod after cylinder is in position on piston. Can be used on
conventional engines with narrow ring spacing. 2-1/8" to 5" (54 to 127mm) range.
- LIS-21700 LISLE WRINKLE BAND RING COMPRESSOR- $13.95
- Range 3" to 5" (76.2 to 127mm). Cuts friction, rings slide in easily. Cannot
slip down into cylinder. Cam operated, set adjustment screw just once for entire set of
pistons. Insert a full set of pistons in half the time with half the work.
- LIS-18500 LISLE SMALL ENGINE RING COMPRESSOR -$10.95
- For small cylinders: 1 1/2" to 3" (38.1 - 76.2mm) Quality tool at a low price.
Takes all the rings at one setting.
- KDT-875 K-D TOOLS PISTON RINGER- $15.90
- Removes and installs small engine piston rings up to 4" (101mm) in diameter. Use
tool to grip ring and expand to fit over piston. Pocket size tool is light, strong and
dependable. No adapters required.
- KDT-850 K-D TOOLS PISTON RING COMPRESSOR SET- $76.09
- Designed to operate both vertically and horizontally. Fine tooth ratcheting lock allows
you to compress band in small increments. Install piston rings from 2-7/8" to
4-3/8". Includes pliers and six bands in sizes 2-7/8" to 4-3/8".
- LIS-24000 LISLE PISTON RING GROOVE CLEANER- $17.95
- Ten cutter sizes on two easy-to-set wheels. Standard LIS-24020 cutter blade sizes are
5/64", 3/32", 1/8", 5/32" and 3/16". Also, LIS-24350 cutter blade
sizes: 1.5mm, 1/16", 1.75mm, 2mm and 1/4". Handles pistons 2-3/4" to
5" (69.8 to 127mm) diameter. Easy to set up on the piston because rack and pawl
mechanism eliminates the problem of setting a thumbscrew while holding the tool in
position. Heavy coil spring holds cutter in groove under pressure for fast, clean removal
of carbon.
- LIS-33500 LISLE PISTON RING INSTALLER- $5.25
- Removes and installs rings easily without damage. Tapered jaws handle most passenger car
and light truck rings from 3/64" to 1/4"
- KDT-870 K-D TOOLS PISTON RING FILER- $88.47
- File piston rings with this portable rotary filer. Accurately sizes any make, type, or
diameter ring. Place opening of piston ring over cutter, turn handle until proper ring
clearance is obtained. Includes extra hard carbide coated cutter file.
- OTC-7082B OTC PISTON PIN REMOVER/INSTALLER SET- $595.00
- Services press fit piston-pin assemblies with pistons of 3-1/8" to 4-3/8" in
diameter. Unique anvil design allows piston to float free, no force is ever applied to the
piston during removal or installation. Spring loaded guide keeps rod and piston aligned
while wrist pin is installed. Includes storage case and complete set of adapters.
- LIS-18000 LISLE UNIVERSAL CAMSHAFT BEARING TOOL- $204.00
- Remove or insert camshaft bearing smoothly in nearly all engines from compact cars to
heavy trucks. The expander unit has a neoprene sleeve over which the split driving plugs
are mounted and expanded to size. Each split driving plug has 4 neoprene O-rings which,
together with the neoprene sleeve, provide a double shock absorber to prevent damage to
new bearings. Range 1.25" to 2.69" (28.58 to 68.3mm). Includes driving shaft,
driving shaft extension, expander unit, five split driving plugs, two driving collars and
centering cone all in heavy duty fitted blow molded case.
- LIS-13000 LISLE EXHAUST MANIFOLD SPREADER- $11.25
- This will expand warped manifolds so all bolts align accurately. Helps prevent
cross-threading manifold bolts.
- Back To The Top Of The Page
ENGINE CYLINDER HONES
- LIS-15000 LISLE CYLINDER HONE- $201.00
- Micrometer head assures accuracy in feeding. Expands quickly to cylinder size with fast
action rack and pinion. Bottom guard plate helps prevent stones from accidentally hitting
the camshaft. Universal joint action makes grinding of back cylinders easy. Clip-on stones
and wipers are easily changed in seconds. Stones are available in four grits. Use with
heavy duty 1/2" drill. range 2-3/4" to 10-1/4" with only one hone body.
Long 5" stones cut faster and more accurately. Includes cylinder hone body, one set
of standard range LIS-15540 racks (range 3" to 4-1/4"), one set of LIS-15500
coarse and LIS-15510 medium grit stones, cleaning brush, dressing paddle. Comes in storage
case.
- LIS-16000 LISLE SMALL CYLINDER HONE -$210.00
- for 1 3/4" to 2 3/4" (44.5 - 66.9 mm) cylinders. Precision built for small
cylinders. Stones are 3 1/2" long assuring unusual accuracy. Stones cover full range,
are easily changed, and available in four grits.
- AMM-3800 AMMCO CYLINDER SURFACING HONE- $92.20
- 2" to 7" (50.8 to 177.8mm) range handles cars and trucks. Cleans up a cylinder
in 20 seconds. Powered by 3/8" or 1/2" drill. Deglazes, gives correct finish for
fast ring seating and long life. Eliminates comebacks on ring jobs. Constant, correct
honing pressure. Flexible drive for hard-to-get-at cylinders.
- STONE-TYPE GLAZE BREAKERS
- Full 2" to 7" (50.8 to 177.8mm) range. Controlled pressure assures positive,
adjustable contact through full range. Adjustable stop-collar permits quick selection of
2" to 4" and 4" to 7" range settings and serves as safety stop if tool
is extracted from cylinder while turning. Operates with any electric drill. Easily
compressed with one hand to eliminate vertical scratches which might spoil the diamond
crosshatch pattern when removing tool from cylinder. three 3" stones provide more
cutting surface, assures quick removal of cylinder glaze. Furnished with 220 grit stones.
ATD-5430 ($21.76)ATD TOOLS. KDT-2833($28.05) K-D TOOLS. LIS-23500($25.45) LISLE.
- Back To The Top Of The Page
FLEX HONES
- BRUSH RESEARCH FLEX-HONES - BLOCK CYLINDER OR LINERS
- All hones are 120 grit. Heavy duty for block cylinders or liners. Diameters 3-1/2"
thru 5" are 12" OAL. Balance 17-1/2" OAL.
- BRUSH RESEARCH FLEX HONES - HYDRAULIC
- For small engines. 10" OAL. All are 120 grit.
- BRUSH RESEARCH FLEX HONES - BLOCK CYLINDER
- Standard duty flex hones. 1/2" OAL. 120 grit.
- Back To The Top Of The Page
RIDGE REAMERS
- LIS-36500 LISLE RIDGE REAMER- $52.95
- Range 2-11/16" to 5-5/16". Rollers assure easy turning in cylinder. Exclusive
stabilizer spring allows operator to take selective cut to minimize chatter. Spring loaded
carbide cutter follows contour of cylinder: complete ridge removed in just a few easy
turns. Offset jaw guides assure rigidity throughout the range.
- AMM-2100 AMMCO RIDGE REAMER- $53.97
- Range 2-9/16" to 5" (65 to 127mm). Carbide cutter removes ridge in seconds.
Will not over-cut. Self-centering insures accurate cutting. Eliminates broken rings.
Speeds piston ring installation. Hex drive for 13/16" socket wrench.
- LIS-38000 LISLE LATHE TYPE RIDGE REAMER- $65.95
- Range 3" to 5" (76.2 to 127mm). Lathe action follows worn cylinder contours
and imperfections to remove all the ridge with one setting. Positions from cylinder wall
to accommodate slant block engines as well as conventional types. Full-floating,
reversible, spring-loaded tungsten carbide cutter stays sharp even when used in steel
sleeves.
- Back To The Top Of The Page
REAMERS
- CHADWICK PRECISION PILOT REAMERS
- Have tapered pilot bushings for line reaming. Reamas king bolt bushings, piston pin
bushings and pitman arm bushings. Reamer blades are placed at just the right angle to give
a smooth shearing cut. Retaining collars at each end of the blades, protect the reamer
nuts and hold the blades firmly for easy adjustment. Carbon steel blades.
- CHD-99960 CHADWICK REAMER CUTTING OIL - 1 QUART CAN -$14.75
- A few drops of cutting oil distributed evenly over the surface to be cut will save many
times its cost on repairs and resharping of tools. A must when reaming steel and alloy
bronze.
- K-D TOOLS TAPERED REAMERS
- To ream, de-burr, align or enlarge holes. made of precision ground heat treated steel
with sure grip plastic handle. Always turn clockwise and use cutting oil. KDT-2043($25.44)
Range 1/8" to 1/2". KDT-2044($42.12) Range 7/16" to 1"
- Back To The Top Of The Page
COMPRESSION EQUIPMENT & COMPRESSION ACCESSORIES
CLICK FOR PICTURE
ATD-5559 ATD UNIVERSAL COMPRESSION TESTER- $34.58
This compression tester is used on all domestic and foreign cars and most trucks.
Adapters fit all vehicles with 14mm plugs. Will also test cars with 5/8" hex plugs.
screw-in adapters with O rings guarantee accuracy. Slide release valve allows retesting of
cylinder without removing adapter. Furnished with 300 lbs./21 kg. gauge.
ATD-5566 ATD QUICK COMPRESSION TESTER- $18.55
This handy tester is ideal for many compact domestic and foreign cars where cylinders
are easily accessible and compression is not very high. Has short offset stem for hard to
reach cylinders. Large white face dial on 2-1/2" gauge for easy reading. has a chrome
ring and a range of 0-300 ibs./21 kg.
KAL-2502 KAL-EQUIP POCKET COMPRESSION TESTER- $22.69
Tests cylinder compression, worn piston rings, blown head gaskets, etc. Large,
black-faced dial gives fast, accurate readings to 300 lbs. per square inch and 0-21
kg/cm2.
KAL-2504 KAL-EQUIP COMPRESSION TESTER- $44.50
Flexible 14" hose lets you check all engines regardless of spark plug location.
Push-button side release valve provided for rechecking cylinder compression without
removing gauge. Combination dial reads all domestic and import cars. Includes adapter for
regular 14mm and 14mm long reach spark plugs and a screw-in adapter for 18mm spark plugs.
Measures 0-300 psi, 0-21 kg/cm2.
MIL-S1251 MILTON DELUXE COMPRESSION TESTER- $42.29
Two piece unit with Kwik-Change coupler permits fast threading into hard-to-reach spark
plug holes. 15" flexible hose, hardened steel, spark plug adapters fit 14mm, 14mm
long, and 18mm. Kwik-Release valve for repeat checks. Large easy to read 2/1/2" dial
with composite metric scale for readings in Kilograms and pounds per square inch on one
easy scale. Works on all foreign and domestic cars. measures pressure 0-3-- psi, 0-21
kg/cm2.
ATD-5573 CYLINDER LEAKAGE TESTER- $116.28
The Cylinder Leakage Tester is an instrument designed to pin-point the problem that your
compression tester indicated. This tester supplements your compression tester by utilizing
shop air and measuring the exact amount of leakage, and localizing the source. You can do
a certain amount of pin-pointing with your compression gauge by squirting oil into the
cylinder - but the best results are not always conclusive nor precise. But now, in just a
few minutes, you can run a Cylinder Leakage Test and be almost certain of what the trouble
is. Doing a valve job is one thing - doing an engine overhaul is something else. the key
is accurate diagnosis.
ATD-5574 ATD WHISTLE ADAPTER FOR ATD-5573- $21.34
Whistles on compression stroke and stops at approximate TDC. Quick coupler connects
directly to cylinder hose. Helpful in remounting distributors correctly. Will show if
timing belt or chain has slipped a notch or two.
LIS-20250 LISLE COMPRESSION TESTER -$35.95
Quickly and accurately check compression on gasoline engine. Gauge registers 0 - 300 PSI
and 0 - 2100 KPA. Fits 14mm and 18mm thread sizes.
LIS-20300 LISLE VACUUM GAUGE AND FUEL PUMP TESTER -$21.45
Easy reading gauge assures accurate vacuum and pressure check.
Back To The Top Of The Page
Please include Name, Address, Phone Number, Part Name & Number, Email Address,
Check or Money order. And we will contact you after receiving your order
If You Have Any Questions Please Email Or Call 
Bernie Cragg 1608 Lehigh Station Rd Henrietta New York, 14467 U.S.A.
Phone (585) 334-8858 Fax 585-334-1373
Best Viewed With These
 |
