- CLICK FOR PICTURE
- ATD-5595 ATD INDUCTIVE TIMING LIGHT- $82.32
- Features direct sunlight bright to 8000 RPM, detachable leads, heavy duty wire and battery clips, easily replaceable Xenon bulb, correct hook-up indicator light and shock protected circuitry for long trouble free use. Fully protected by one year warranty.
- ATD-5596 ATD TIMING-ADVANCE TESTER- $143.24
- Features die cast metal construction, superior performance at all speeds through 8000 RPM, clear display indicates desired degree of advance up to 60 degrees, replaceable Xenon flash tube, detachable clamp-on inductive pick-up, and double check light indicates incorrect hook-up and faulty flash. One year warranty.
- KAL-L10 KAL-EQUIP HIGH SPEED INDUCTIVE POWER TIMING LIGHT- $96.69
- Exclusive solid-state design provides a brilliant white light under all lighting conditions. Use on all 12 volt vehicles. For domestic and import cars, industrial engines, motorcycles, snowmobiles, etc. Features chrome metal case, electronic clamp-on pickup that lets you hook up without disconnecting spark plug wires. heavy duty leads and clips.
- ATD-5598 ATD CORDLESS TIMING LIGHT- $118.65
- Ideal for use on motorcycles and marine engines. True fresnel lens and linear flash tube produce a brilliant flash at all engine speeds. For 2 or 4 cycle engines and all ignitions. Accurate up to 10,000 RPM. Powered by 2 D-cell batteries.
- KAL-2078 KAL-EQUIP INDUCTIVE POWER TIMING LIGHT- 68.31
- test engine timing on domestic and import cars. Features an electronic clamp-on pickup which eliminates any need to disconnect spark plug wire. Solid state circuitry designed to give the maximum amount of light at just the right distance to use.
- FER-80 INDUCTIVE PICK-UP TIMING LIGHT- $149.00
- Rugged and easy to use. Strongly discriminates between spark pulses and noise. Fits up to 8mm wire. Pick-up wire is easily replaced. 3 levels of brightness.
- FER-82 ADVANCE DIAL TIMING LIGHT- $189.00
- Large calibrated dial provides high accuracy and easy operation. 2/4 stroke switch allows use on DIS and distributor ignition. Multistroke ignition capable. 3 levels of brightness. Ideal for high performance engines.
- FER-84 TACH ADVANCE TIMING LIGHT- $199.00
- First choice for modern engine timing requirements. Back panel LED shows RPM or degrees of advance. Buttons adjust advance for one hand operation. 2/4 stroke switch allows work on DIS or distributor systems. Multistroke ignition capable.
- FRE-86 TACH-ADVANCE-DWELL-VOLTS TIMING LIGHT- 289.00
- All the functions of FER-84, plus a voltmeter, and % dwellmeter. Displays 1/10 of a degree timing advance.
- KAL-4071 KAL-EQUIP ADVANCE TIMING ANALYZER- $269.69
- Without removing the distributor, this rugged die cast metal DC powered analyzer will make a total timing and distributor analysis. Clamp-on inductive hook-up for 12 volt systems on domestic and import cars and trucks, Tack reads 0-6000 RPM on color-coded meter. Degrees advance, used to check distributor degrees of mechanical, vacuum and total advance at engine running speeds. 0 degrees to 60 degrees meter scale in 1 degree increments. Spring loaded high tension sensor clamps over spark plug wire.
- CEN-6491 CENTRAL MOTORCYCLE TIMING GAUGE- $104.65
- Read timing without removing fuel tank. Compact gauge, specially designed for the cramped quarters on many makes of motorcycles. Adapter has locking collar for adjusting indicator when adapter is in position on engine. Indicator has .01mm graduations. Range 5mm. Reading 0-100. Complete with indicator, 1-1/2" and 2" contacts.
- Back To The Top Of The Page
- CLICK FOR PICTURE
- KAL-R12 KAL-EQUIP PRECISION TACH-DWELL- 126.92
- Works on all 4,6 and 8 cylinder engines. Operates with all HEI systems. testes carburetor idle and fast idle speed, idle mixture jets, govener speeds, conventional dwell, distributor bushing wear and static points resistance. dependable solid-state circuitry. tachometer ranges0-1,200 and 0-6,000 rpm. Points resistance OK/high zones, dwell 0-70 degrees, made with a durable and attractive chrome metal case. Instruction manual included.
- OTC-3398 OTC PULSE TESTER- $131.95
- The only true way to do a cylinder balance test when injectors are suspect in engine performance problems. this vehicle-powered electronic tool fires individual fuel injectors in 1/2 second increments in three different ranges. 1 pulse of 500 milliseconds, 50 pulses of 10 milliseconds and 100 pulses of 5 milliseconds. Power light and output light tell you when test is in activation. Includes wiring harness adapter and complete instructions.
- KAL-R89 KAL-EQUIP PORTABLE EXHAUST ANALYZER- 385.40
- Provides pinpoint test accuracy. Checks carburetor condition and adjusts air fuel ratio on most cars simply and accurately. Tests air/fuel mixture ratios on both gasoline and liquid gas, adjusts to correct carbon monoxide level, carburetor adjustments and other emission tests. Air/fuel ratio: 8/1 to 16/1(gasoline), 12/1 to 16/1(liquid gas). Features solid state circuitry, D'Arsonval meter movement, built-in mounting magnet. Use on positive or negative 6 and 12 volt vehicles. Made with a durable and attractive chrome metal case. Instruction manual and storage case included.
- THX-389 THEXTON BACKPRESSURE TEST ADAPTER KIT- $33.71
- Aids in diagnosing clogged or restricted exhaust systems. Allows comparing backpressure readings ahead and behind of suspected restriction. Ideal for diagnosing clogged catalytic converters. Kit includes small hole punch for use with air hammer, self-tapping adapter with test port and five 5/16" x 1/2" bolts for resealing exhaust test ports.
- Back To The Top Of The Page
- CLICK FOR PICTURE
- ATD-5549 DELUXE GLOBAL FUEL INJECTION PRESSURE TEST SET- $547.55
- A must for the professional technician! the many adapters, hoses and fittings cover all fuel injection systems and most cars and trucks worldwide. Contains a uniquely designed 3-1/2" gauge with 1 lb. increment dial and a 100 psi. capacity, a relief valve and 6' of tubing to relieve pressure, a 4' gauge hose and gauge with a hook, a quick coupler to make adapter changes easily. Sturdy plastic storage case. Made in U.S.A. ATD-5571 Adapter allows use of 3M and Champion cleaners, ATD-5572 Adapter allows use of OTC canister cleaner.
- ATD-5584A BASIC FUEL INJECTION PRESSURE TESTER- $131.66
- For GM-TBI systems only. Contains a 2-1/2" gauge with dual dial 60 psi. and 4 bar, 16" gauge hose with quick coupler for fast adapter changing. Needed on GM TBI because there is no Schrader valve in the system. Instructions included. Made in the U.S.A.
- ATD-5567 FUEL INJECTION TESTER- $52.45
- Tester determines if fuel pressure regulator needs adjusting or replacing. Allows technician to make adjustment if adjustable. Also will show other bad components such as fuel pump, filter, etc. Will not work on Bosch CIS or GM TBI systems. Includes 2-1/2" gauge with 100 psi. and 7 bar, several flexible hoses.
- ATD-5567A BASIC FUEL INJECTION PRESSURE TESTER- $174.43
- For all systems, except Bosch CIS and GM TBI. Includes 2-1/2" dual scale gauge with 100 psi. and 7 bar, plus many adapters, Banjo bolts and 16" gauge hose assembly.
- ATD-5547A BASIC FUEL INJECTION PRESSURE TESTER- $133.88
- For Bosch CIS systems only. Can find bad fuel pumps, pressure regulators, leaking injectors and clogged fuel filters. Includes 2-1/2" gauge with 100 psi. and 7 bar, 16" gauge hoses and quick disconnect CIS hose assembly and all needed metric adapters.
- THX-2500 THEXTON GM CCC/TBI FUEL SYSTEM ADJUSTMENT KIT- $199.35
- Kit contains 14 Necessary tools to check and adjust GM Computer Command Control and Throttle Body Injection systems. Rugged storage case keeps tools togather. Ideal starter package. Complete with instructions for each tool.
- Back To The Top Of The Page
- CLICK FOR PICTURE
- OTC-3050A OTC INJECTOR HARNESS TESTER SET- $53.95
- 5-piece set instantly checks injector harness for power on Ford, GM and Geo TBI, GM and Bosch PFI. Comes with plastic storage case.
- OTC-3051 OTC GM/IAC SIGNAL TEST LIGHTS- $66.95
- For checking the electronic control module signal that provides direction to the Idle Air Control (IAC) motor on GM vehicles with throttle body or port fuel injection systems.
- OTC-7651 OTC DOMESTIC VEHICLES FUEL INJECTION TOOL KIT- $499.00
- All you need to test and repair all electronic and mechanical fuel injection systems found in GM, Ford and most Chrysler vehicles. Can be used in conjunction with with OTC's Monitor scan tool. When used with OTC-3398 pulse tester you can identify problem injectors. Kit includes: two gauge assembly and hose sets, pulse tester, two Noid-lite harness testers, idle air control socket and inlet plugs, and six adapters or sets.
- OTC-7669 OTC FUEL INJECTOR CLEANER KIT- $
- Cleans more effectively and profitable than conventional aerosol methods. Works on both high and low pressure systems and on domestic and import vehicles. Kit includes canister, gauge, hose, operating instructions, fittings, T&T manual and twelve cans of OTC-7000.
- MMM-08840 3M FUEL INJECTOR CLEANER ADAPTER SET- $396.37
- Assortment of adapters and one hose to enable a shop to clean fuel injectors commonly found in GM, Chrysler, Nissan, Ford, and Toyota. See manufacturer's catalog for complete listing of optional adapters and their applications. Storage case included.
- MMM-08912 3M MULTI-PORT INJECTOR CLEANER- $17.81
- 16 oz. aerosol is used with MMM-08933 set to quickly remove varnish, gum and other deposits. Restores injector atomization and efficiency.
- OTC-7448 FUEL INJECTOR CLEANER- $332.95
- This large canister (18 fluid oz. ), cleans more effectively on a wide range of imported fuel injected vehicles with either high or low pressure systems than the aerosol can method. It has an easy-to-read large dial face and is accurate to +/-1% through the complete range of 0-100 psi. Includes gauge, 72" hose, instructions, and T & T manual.
- OTC-7000 PRO INJECT-R-KLEEN FLUID-CASE/12- $120.00
- OTC-7903 PRO INJECT-R-KLEEN- $15.95
- Mix one 16oz. bottle with half of gallon of gasoline.
- Back To The Top Of The Page
- CLICK FOR PICTURE
- ATD-5680 AMERICAN DIESEL SET- $171.69
- This is a great basic set and a must have for Diesel work in the American market. Tester has a handy deflator for releasing air and retesting. A 16-1/2" wire reinforced hydraulic hose has a quick-coupler on a swivel for ease of connection. It has a 2-1/2" gauge with easy to read red and black dial & Posilock lens. records pressure from 0-1000 PSI and 0-70 bar. Includes adapters for all GM, Isuzu, Lincoln Mark VII and Continental, Ford/Mavistar, Audi, Mercedes, Peugeot, Toyota, VW, Volvo. Bacharach conversion adapter also included. Comes in a very attractive red metal box and insert to keep tester and all components neatly arranged.
- ATD-5681 GLOBAL DIESEL SET- $
- This set is a must have for Diesel light cars and trucks in the global market. Includes adapters for Audi, BMW, Isuzu, Mazda, Mercedes, Mitsubishi, Nissan, Peugeot, Toyota, VW, Volvo, Motometer conversion adapter included. The same basic tester as in our ATD-5680 set with other adapters. comes in a very attractive red metal box and insert to keep tester and all components neatly arranged.
- ATD-5682 HEAVY DUTY GLOBAL COMPRESSION TEST SET- $545.12
- Contains tester and all the most popular adapters needed to test heavy duty trucks and equipment. Adapters to test Cummins, Bedford, Case, Caterpillar, John Deere, Fiat Allis, Ford Tractor, GMC, Hino, International & Navistar, Isuzu, Mack, Massey-Ferguson, Mercedes, Mitsubishi-Fuso, Onan, Scania, Volvo, Wisconsin, and others.
- ATD-5683 HEAVY DUTY DIESEL ADAPTER SET- $446.97
- Same as above, without tester.
- Back To The Top Of The Page
- CLICK FOR PICTURE
- ATD-5557 ATD DELUXE VACUUM/FUEL PUMP TESTER KIT- $27.77
- will test fuel pump and all vacuum opperated devices. Will diagnose leaking valves, incorrect timing, leaky intake manifold and clogged muffler. Large 3-1/2" gauge. Range 0-28 in/0-70 cm, vacuum and 10 lbs./7 kg. pressure. Comes complete with 3 brass fittings to connect into vacuum and fuel lines, 2-foot tubing and instructions.
- KDT-2521 K-D TOOLS FUEL PUMP VACUUM AND PRESSURE TESTER- $20.78
- Tests for fuel line pressure and vacuum leaks. Checks for leaky valves, timing, fuel pump vacuum and pressure, and gas line leakage. easy-to-read 2-1/2" gauge with 3' hose and vacuum fitting. Dial measures vacuum from 0 to 28" Hg in 1" increments (0 to 700mm Hg in 50mm increments). Measures pressure from 0-15 PSI. in 1/2 PSI increments (0-1 Kg/cm2 in. 1 Kg/cm2 increments). Caution: Not for use on Fuel Injected Vehicles.
- STA-12260 STANT VACUUM TESTER- $76.64
- Save valuable time in finding advance chamber trouble. Finds even tiny pinholes in diaphragms of vacuum power units. Helps prove out tune-up jobs before road testing. Checks any vacuum operated devices on any vehicle such as door locks, booster pumps, vacuum controls on heaters and air conditioners.
- LIS-75000 LISLE HEAVY DUTY METAL VACUUM PUMP- $62.95
- Pump is one piece zinc die cast metal for durability. Checks all vacuum operated components on car. Comes with intruction manual. LIS-75400 Vacuum Pump Repair Kit for Lisle Pump.
- MTY-6810 MITY VAC VACUUM TESTER- $51.43
- A test kit designed for testing vacuum-operated or vacuum related systems on automobiles, ATV, boats, etc. Kit includes Mityvac 100+ page user's manual, repairable Mityvac pump with calibrated gauge, and automotive adapter package and transparent plastic tubing.
- MTY-4000 MITY VAC SILERLINE(R) METAL VACUUM PUMP AUTIMOTIVE KIT- $77.91
- A complete test kit with a repairable Mityvac pump made of die-cast metal. The silverline kit includes accessories to test vacuum systems as well as fuel, emissions control and many others. The brake bleeding accessories allow you to bleed brakes quickly, easily and effectively. Includes Mityvac 110+ page user's manual, and a molded storage case. MTY-4100 Maintenance Kit for 4000 Pump.
- Back To The Top Of The Page
- THX-384 THEXTON UNIVERSAL FUSE BLOCK TEST ADAPTER- $13.68
- Easy, professional way to test fuse block circuits. Allows use of test meter on both glass tube and blade-type fuses. Glass tube-type fuse adapter works with all glass fuses. Includes 2 feet of test wire.
- KDT TOOLS IGNITION TESTERS
- Check for spark without removing spark plug from engine. Tester accepts spark plug lead and clamps to ground. Will spark when engine is cranked onlt if correct energy level is present. No spark indicates ignition system problem. KDT-2756($8.13) For HEI systems. KDT-2757($8.06) For standard ignition systems.
- OTC-7230 OTC ELECTRONIC IGNITION SPARK TESTER- $12.95
- For pre-testing electronic ignitions. Saves time because you'll if the ignition is causing problems in a non-starting car. Use two OTC-7230's when checking DIS or EDIS systems.
- THX-304 THEXTON FULL-FIELDER ALTERNATOR TEST ADAPTER- $4.05
- Simplifies on-the-car alternator testing. Energizes field circuit so full output can be measured. By-passes voltage regulator to isolate charging problems. Accepts standard, non-transistorized Delco, Ford and Chrysler voltage regulator units. Mistake-proof, unbreakable and works with all test equipment.
- THX-342 THEXTON FULL-FIELDER-II ALTERNATOR TEST ADAPTER- $9.49
- Fits Delcotron, Ford and Chrysler electronic and internal systems. Measures full alternator output. Isolates charging circuit problems. Units cannot be used wrong. Eliminates hookup errors. Makes testing quick, easy and mistake-proof. Made of unbreakable plastic.
- OTC-3334 OTC MASTER HALL EFFECT TEST KIT- $283.00
- The common Hall effect switch is found in crankshaft and camshaft sensors, and distributors. When it fails, the vehicle simply will not start. OTC's hand-held tester gives you the results of an oscilloscope, but a lot quicker, easier and for a fraction of the price. Easily updated. Kit covers GM, Ford and Chrysler. Instructions included.
- LIS-22700 LISLE CODE RETRIEVER FOR GM- $2.45
- Tree in one tool retrieves trouble codes from engine computer, rear wheel anti-lock brake computer and four wheel anti-lock brake computer for late model GM vehicles.
- Back To The Top Of The Page
- CLICK FOR PICTURE
- ASO-6042 ASSOCIATED BATTERY & ELECTRICAL SYSTEMS TESTER- $1355.00
- For precise and quick diagnosis of 12 and 24-volt electrical systems. Will also analyze charging/starting systems and GM diode/trios. Large LED meters read up to 99.9 volts DC and 999 amps. Features 10 megohm input impedance, high resolution carbon pile. 15-foot load cables with fully-insulated 500-amp clamps, equipped with patented side terminal adapters. Includes VHS instructional video and highly stable wheel-around stand.
- VARAIBLE LOAD CARBON TESTERS
- ASO-6036B ASSOCIATED 1,000-AMP VARIABLE LOAD TESTER- $1,035.00
- Ideal for high volume battery testing by fleets or battery distributors. Features large scale analog voltmeter (0-16 volts DC) and ampmeter (0-1,000 amps) with numerical scale and color-coded Good/Bad readings. Also features high RPM fan for high volume testing, long-lasting three-stack carbon piles, and 1,000-amp insulated clamps. Tests batteries up to 2,000 CCA.
- ASO-6038B ROLLAROUND SERVICE CART FOR ASSOCIATED CARBON PILE TESTERS- $153.25
- ASO-6035A ASSOCIATED 500-AMP VARIABLE LOAD CARBON PILE TESTER- $498.25
- Combines the accuracy of a digital voltmeter with the versatility of an analog amp meter to give you fast and precise source of battery and charging system problems. Features LED voltmeter (0-19.9 Volts DC) and 4-1/2" D'Arsonval ampmeter (0-500 amps, 0-1,000 CCA). Tests 6 or 12 volt systems, batteries up to 1,000 CCA, state of charge, alternator output and starter motor draw.
- ASO-8500 ASSOCIATED ALTERNATOR/STARTER TESTER- $1425.00
- Will test -under load - 12 or 24 volt, externally or internally regulated alternators. Enough capacity to test even high amperage Ford starter products. tester is constructed of heavy gauge steel with baked-on painted finish for long life. Oversized cast aluminum vise securely holds alternators and large starters in place during the test procedure. Visual and audible warnings alert operators to low incoming line voltage conditions or reversed or shorted connections. No batteries are need - plugs into any 120-volt outlet. Weight 110 lbs.
- ASO-6054 ASSOCIATED GROWLER ARMATURE TESTER- $232.80
- Detects and locates defects in generator and starter armatures 7/8" to 8" in diameter. Also tests armatures in heaters, fans, electric power tools. Checks continuity and insulation. Includes 24" test leads with accompanying lights. 120 Volt, UL listed.
- Back To The Top Of The Page
- CLICK FOR PICTURE
- FIXED LOAD TESTERS
- ATD-5525 ATD DELUXE BATTERY TESTER- $59.70
- Test 6 or 12 volt batteries; hardtop, discharged and maintenance-free batteries. this tester has built-in starter test and is completely portable. Outside power is not required. Heavy duty color coded plated clamps. tester has a ventilated body. 1,000 amp capacity.
- MIL-1260 MILTON BATTERY TESTER/STARTER- $114.83
- Tests 6 to 12 volt batteries. Simple overall check at charging system. Minimizes battery comebacks due to charging trouble. Rated up to 1,000 amp capacity.
- ASO-6029 ASSOCIATED BATTERY TESTER- $101.00
- 125 amp load tester for conventional and maintenance-free 6 and 12 volt batteries. Tests battery state of charge, cranking ability, charging system output and checks for excessive starter motor draw. Convenient thumb control for easy one hand operation. Stainless steel cabinet face, equipped with side terminal adapters, and 300 amp clamps.
- HYDROMETERS
- PLE-70053 PLEWS PROFESSIONAL BATTERY TESTER- $12.57
- Color coded float accurately indicates cell condition at a glance. Thermometer permits compensated readings for all temperatures.
- THX-117 THEXTON DISC TYPE BATTERY TESTER- $16.99
- full size tester tests batteries quickly and accurately at any temperature to -40 degrees. No temperature compensation needed. Number of floating discs show state of charge. Made of tough, break resistant San plastic. State-of-charge printed in specific gravity gradients on tester. One piece rubber bulb, neoprene rubber tip.
- THX-115 THEXTON CHARG-CHEK(R) BATTERY TESTER- $5.48
- Tests accurately from -40 degrees to 130 degrees using less than 1/4 oz. of acid. No temperature compensation needed. Easy to read and use. Eliminates errors. Spots bad cells quickly. easy to carry in vacuum sealed container and pocket protector case. Charging guide included. Unbreakable rubber tip. Crack resistant. neoprene rubber bulb. Number of floating balls show state of charge.
- Back To The Top Of The Page
- ATD-5500 ATD PRIMARY CIRCUIT TESTER- $5.97
- 6 and 12 volt. Locates shorts, open circuits and grounds. Use with ignition on. Clip to ground anywhere on vehicle and use probe to make contact with wire or cable being tested. Bulb indicates condition of circuit.
- KDT-129 K-D TOOLS LOW VOLTAGE CIRCUIT TESTER- $10.40
- Tests for voltage in 6 and 12 volt systems. Ground clip and touch probe to point being tested. Tester bulb will light if light if power present.
- KDT-2646 K-D TOOLS LOW VOLTAGE CIRCUIT TESTER- $7.24
- Quickly locates headlight, tail light and turn signal circuits, faulty sockets, connections, fuses and broken wires. Tough, durable shock-resistant case. Includes bulb at each end. Switch probe if bulb burns out. cable length 36".
- ATD-5501 ATD HIGH/LOW VOLTAGE TROUBLE SHOOTER- $6.43
- Two testers in one. Check spark plugs on secondary or high voltage circuits. Check breaks in radio resistant hook-ups and pin point cracks in distributor caps. Also use as a continuity tester for low voltage circuits. Equipped with 36" leads.
- KDT-126 K-D TOOLS HIGH-LOW VOLTAGE TESTER- $9.85
- Checks 6 and 12 volt circuits for voltage and spark plug for spark. Ground clip and touch probe to point being tested. Tester bulb will light if voltage present. Screw probe into opposite end of handle to check for spark.
- KDT-2649 K-D TOOLS CIRCUIT AND SPARK PLUG TESTER- $9.69
- Checks 6 and 12 volt circuits for voltage and spark plug for spark. Place probe on end with regular bulb to check low voltage. Place the probe in end with neon bulb to check for spark voltage. 36" cable. Shockproof case.
- ATD-5504 ATD SPARKPLUG TESTER- $5.29
- Will not harm plug wires or boots. Inductive type tester has a shockproof plastic body with a handy pocket clip. Easy to use, simply hold against sparkplug wire to check condition of spark.
- ATD-5513 ATD HEAVY DUTY CIRCUIT TESTER- $8.77
- Easily checks 6 and 12 volt systems. Has 5 ft. heavy duty lead. Tough plastic handle lights up if circuit is good. Lead remains flexible in low temperatures.
- ATD-5502 ATD CONTINUITY TESTER- $6.31
- Tests all 6, 12 and 24 volt DC circuits and grounds. Test all voltage circuits with power disconnected. Useful for testing appliances and electrical circuits. Bulb lights to indicate shorts. Perfect for RVs, marine and automotive circuit checks. Nickel plated high carbon steel tip.
- KDT-2647 K-D TOOLS CONTINUITY TESTER- $7.25
- Safely tests circuits with power off. designed for the home mechanic. 36" cable. One AA battery required (not included).
- KDT-2524 K-D TOOLS SHORT CIRCUIT DETECTOR- $31.38
- Locates shorts in 6 and 12 volt circuits without removing upholstery, body panels, etc. Operates through metal door posts, rocker panels and upholstery. Easy to follow instructions included.
- Back To The Top Of The Page
- CLICK FOR PICTURE
- WAE-SST01 WAEKON SST TEST LIGHT- $64.95
- The first economically designed circuit test light. it is computer and airbag safe. It has a built-in flashlight, red & green LED indicator on 12V or ground. Buzz alert on 12V or ground. plugs directly into dash outlet includes 3 testing accessories plus blow molded case.
- SHE-8007 SHEFFIELD POCKET CORDLESS CIRCUIT TESTER- $18.56
- Computer safe with a microscopic current draw (about one microamp) which is 30,000 time less than a regular lamp type tester. Tests 6 to 24 volt battery powered positive or negative systems. LCD shows circuit ok.
- SHE-8002 SHEFFIELD PROFESSIONAL CORDLESS CIRCUIT TESTER- $27.80
- Computer safe circuit tester. Will not harm vehicle microcontrollers if wrong wire checked. 3 way signal: buzzer, light and vibration.
- SHE-TA100 SHEFFIELD WIRELESS TACHOMETER & SPARK ANALYZER- $170.76
- It reads engine RPM by receiving radio signals from secondary ignition system. Hold telescopic antenna above engine and read RPM's on digital display. Accuracy .5% spark analyzer shows voltage in plug wires and allows quick identification 4 plug and wire problems.
- WAE-TLM01 WAEKON TEST LEAD MASTER KIT- $139.95
- This is for professional technicians. Includes the finest assortment of test leads and clips in an organized storage case. It includes pocket tester, battery adapter, great test leads, great jump tests, plus an assortment of alligator clips and adapters.
- WAE-GTL01 WAEKON GREAT TEST LEADS- $34.95
- This has the highest quality neoprene coiled cords which can stretch over six inches and automatically recoil after use. It has a non slip prodding probe with stainless steel points removable alligator clips for each end so leads can be used as jumper leads. The standard banana plug allows use with all meters.
- ATD-5505 TEST LEADS- $3.81
- 36" pair of leads. Four alligator clips. Two are insulated with boots.
- Back To The Top Of The Page
- CLICK FOR PICTURE
- CENTRAL OUTSIDE MICROMETERS
- Anvil and one piece spindle are made of finest quality steel. Features simplified zero adjustment, friction stop, spindle lock, and all thousandth graduations are numbered so you can read directly without counting. I-beam frame drop forged to withstand hard usage. CEN-6009($84.10) 0"-1" Range, CEN-6031($97.04) 1"-2" Range, CEN-6051($108.53) 2"-3" Range, CEN-6071($119.66) 3"-4" Range, CEN-6091($) 4"-5" Range.
- CEN-6190 CENTRAL BALL ANVIL MICROMETER- $72.21
- For measuring bearing inserts and other curved surfaces. I-beam frame. Features friction stop and spindle lock. Range 0"-1", graduations .0001".
- MICROMETER SETS
- I-beam frame. Each micrometer equipped with friction stop and spindle lock. With fitted plastic case and standard test gauges. Available in standard and metric.
- CEN-6205 CENTRAL RANGE MICROMETER SET- $203.41
- Three interchangeable anvil extensions are adjustable with Knurled locking collar. Crowned anvil surface eliminates gauging. Satin chrome finish. Drop forged steel I-beam with baked enamel finish. Fitted case includes standard. Friction stop, spindle lock. .001" graduations. Range 0"-4".
- Back To The Top Of The Page
- CLICK FOR PICTURE
- CEN-6420 CENTRAL VERNIER CALIPER- $62.15
- For inside, outside, and depth measurements. High quality calipers are made of stainless steel, stress relieved with satin chrome finish. Measuring surfaces are precision ground and lapped to provide highest degree of accuracy. Easy to read black graduations are precisely etched on recessed face of hardened bar. 0-6" and 0-150mm range, .001" and .02mm graduations. features thumb lock.
- CEN-6425 CENTRAL ELECTRONIC DIGITAL CALIPER- $243.39
- Ideal for measuring the inside of cylinder bores, outside of camshaft journals, depth of valve seats and strip of recesses in pin grooves. Made from hardened stainless steel with precision ground and lapped measuring surfaces. 0-6"/0-150mm range, .0005"/.01mm graduations. 5 digit LCD display readout and a low battery warning display. 4 way measurement: inside, outside, depth, and step. Plus, automatic reset. Comes in fitted case with a 1.5 volt battery. Assembled in USA with swiss electronics.
- CEN-6427 CENTRAL DIAL CALIPER- $66.85
- For inside, outside, and depth measurements. Made with the same high caliber workmanship and precision as vernier calipers. Dial indicator has fine-line indicating hand for accurate reading. 0-6" range, .001" graduations, thumb wheel fine adjustment. 100" range per revolution.
- CEN-6421 CENTRAL 5" VERNIER CALIPER- $73.37
- Range 0-125mm. 0-5" .001 graduations. Microscrew and slide lock.
- CEN-6220 CENTRAL INSIDE MICROMETER SET-TUBULAR TYPE- $170.35
CEN-6230 CENTRAL INSIDE MICROMETER SET-ROD TYPE- $123.39 - Satin chrome finish. Furnished complete with measuring rods, spacing collars, and extension handle in a fitted case. Standard range 2"-8", in .001" graduations.
- DEPTH MICROMETER SETS
- Graduations numbers read right side up when gauge is in measuring position. Satin chrome finish. Complete in fitted case with extension rods. CEN-6240($139.24) 0-3" range, .001 Grads., 2-1/2 ' base length. CEN-6251($241.29) 0-6" range, .001 grads., 4" base length.
- CEN-6506 CENTRAL 4"(0-100mm) SLIDE RULE CALIPER- $19.20
- Handy, durable, pocket size. Made of heavy gauge solid brass for long, accurate service. Will never rust. Machine divided graduations - 32nds and 1mm. Use for both inside and outside dimensions. Furnished in polyvinyl case.
- CENTRAL PLASTIC DIAL CALIPER
- For inside, outside and depth measurements. Made of fiberglass reinforced plastic. CEN-6508($35.40) 0-6" range, .001" grads. CEN-6531($35.40) 0-6" range, 64ths and .01 grads. CEN-6532($35.40) 0-150mm range, 0.1mm grads.
- GENERAL HARDWARE VERNIER CALIPERS
- Slide caliper with roller adjustment. Has both inside and outside jaws and full length depth gauge. Range 0-5". GEN-721($12.54) graduated in 16ths and 32nds with a vernier reading of 1/128th. GEN-723ME($12.53) same as GEN-721 except grads. in 16ths and millimeters.
- GENERAL HARDWARE ECONOMY DIAL CALIPERS
- For inside, outside and depth measurements. Made of fiberglass reinforced plastic. GEN-142($30.95) 0-6" range. 64ths graduations.
- CENTRAL CALIPERS AND DIVIDERS
- Fully hardened and heat treated with brushed finish. CEN-6524($19.64) 6" outside caliper. CEN-6527($19.28) 6" inside caliper.
- Back To The Top Of The Page
- CLICK FOR PICTURE
- CEN-6400 CENTRAL UNIVERSAL DIAL INDICATOR SET- $93.87
- Set contains jeweled bearing indicator with 1-1/2" diameter bezel, rear mounted plunger, 2 contact points - 3/16" and 5/16" diameters, 8" sectional rod - 5/16 diameter, .125" range hole attachment, c-clamp for indicator mounting, universal rod connector, 5" tool post holder, 1" long contact point. .200 range, .001 graduations. Reading 0-100. Furnished in fitted case.
- CEN-6401 CENTRAL UNIVERSAL INDICATOR SET- $93.87
- Same as CEN-6400 except reads 0-50-0.
- CEN-6405 CENTRAL DIAL INDICATOR SET WITH MAGNETIC BASE- $124.98
- Set contains jeweled bearing indicator with 1-1/2" diameter bezel, rear mounted plunger, 2 radiused contacts - 3/16" and 5/16" diameter, powerful magnetic base with post and indicator rod, 1" long contact, and 2 universal connectors all in fitted case. Range .200". Graduations .001". Reading 0-100.
- CEN-6410 CENTRAL LONG RANGE INDICATOR SET- $145.87
- Set has powerful magnetic base with post and a large 2-1/4" diameter dial indicator. Indicator made to the highest standards and with extreme accuracy throughout its full range. Dial is both continuous and balanced with revolution counter and may be rotated for setting at any point. Also includes contact, rod connector, indicator holding clamp, dual diameter rod all in fitted case. Range 1.0". Graduations .001". Reading 0-100.
- CENTRAL STAYFIRM(R) DIAL INDICATOR SETS
- Magnetic base conforms to any surface-regular or irregular. CEN-6419($205.83) Standard 1" range indicator with .001" graduations. CEN-6409($175.86) Metric 25mm Range Indicator with .01mm graduations.
- CEN-6413 CENTRAL HEAVY DUTY INDICATOR SET WITH FLEX-ARM- $215.27
- Features versatile flex arm that can be lock in any position. Base has heavy duty magnet which is released instantly when switch is turned to off position. Includes magnetic base, flexible arm and indicator dial. 1.00" range. Graduations .001". Reading 0-100. Has 12-1/2" flexible arm. Comes in fitted plastic case.
- CEN-6415 CENTRAL MAGNETIC BASE- $49.30
- Powerful, compact with adjustable swivel clamp for post and arm. Base 2" x 1-1/4" x 2". Post 5/16" diameter x 4" long. Rod is 1/4" x 5/16" diameter x 4" long.
- CEN-6416 CENTRAL MAGNETIC BASE- $85.21
- Powerful magnetic with off-on switch. Separately adjustable post and arm clamps with large locking knobs. Base 2-3/8" x 1-7/8" x 2-1/2". Post 15/32" diameter x 7" long. Rod 25/64" diameter x 6" long.
- Back To The Top Of The Page
- CLICK FOR PICTURE
- CENTRAL PRECISION STRAIGHT EDGES
- Precision ground to +-.001" for checking warp of cylinder block and head. Enameled on all surfaces except measuring edge to protect against rust. Has hang-up hole for safe storage. CEN-6475($63.06) 18" length, v-6 engines. CEN-6429($81.15) 24" length. CEN-6431($95.18) 35" length.
- CEN-6553 CENTRAL TELESCOPING GAUGE SET- $71.35
- heavy duty gauges. Check slots, groves, recesses, cylinders. Satin chrome finish. Both contacts release or lock by turning knob at end of handle. Measurement is read by micrometer. Four gauges in pouch. 5-1/2" handles. Self centering. Range 5/16" - 2-1/8". CEN-6554 Same as CEN-6553 except 6 gauges. Range 5/16"-6".
- CEN-6450 CENTRAL DISC ROTOR AND BALL JOINT GAUGE- $222.65
- Checks ball joint wear and disc rotor runout. Can also be used to check, gear backlash, valve guide wear and camshaft wear. 1" range; .001" graduation, 0-100 reading. Indicator mounts on flex arm which locks into desired position by turning lever at base. Arm attaches to special vise grip pliers which clamp securely to any convenient object. All in fitted case.
- CEN-6467 CENTRAL CYLINDER BORE GAUGE- $375.77
- Meet the most demanding machining requirements with this gauge. .0001" graduations and a 2-8" range lets you meet the tightest tolerance on all car and truck engines. The 12" depth allows measurement of cylinder diameter, taper and out of round without removing piston.
- CEN-6494 CENTRAL ANGLE FINDER- $38.69
- Measures frame angle, pitch forward or backward, in setting truck front ends. magnet in base holds tool in place. Graduated in 1/2 degree increments.
- CEN-6460 CENTRAL CYLINDER BORE GAUGE- $134.69
- For quickly and accurately checking cylinder diameter, taper and out-of-round. Full face visibility of indicator at all times. Complete with 10-1/2" handle and set of contact extensions in fitted case. Graduations .0005". Range 2.125" to 7". Reading 0-20-0.
- CEN-6462 CENTRAL CYLINDER BORE GAUGE- $229.98
- Measures taper and out-of-round from immediate underside of ridge to bottom of critical wear area without removing pistons. can measure bore diameter to depth of 8". Rugged one piece construction. Comes complete with contact extensions. Furnished in fitted case. Range 2.6" to 7". Graduations .001". Reading 0-50-0.
- Back To The Top Of The Page
- ATD MICROMETER TORQUE WRENCHES
- CENTRAL TORQUE WRENCHES
- Use of torque multiplier expands the range of a torque wrench by the ratio of the multiplier. Designed with four pinion gears in a compact housing.
- LUFKIN MEASURING TAPES
- PEE WEE MANUAL OPERATION PLASTIC CASE, AUTOMATIC POWER RETURN CHROME CASE, UNIVERSAL LIGHTWEIGHT TAPE PLASTIC CASE.
- CLICK FOR PICTURE
- HOOPY TESTER KITS
- HOP-100B HOPKINS HEADLAMP AIMING KIT
- Contains two headlamp aimers. Adapters are provided: one pair to accommodate 5-3/4" and one pair to accommodate 7" circular sealed beam headlamps. One pair to accommodate 4" x 6-1/2" and one pair to accommodate 5-1/2" x 8" rectangular sealed beam headlamps. Also includes one pair of floor compensation and calibration fixtures used to aim headlamps on surfaces not level, light intensity meter, aiming screen and corrugated storage case. HOP-1003B ($563.68) Same as HOP-1001B except does not include light meter or aiming screen.
- HOP-82001 HOPKINS VISION 1™ IMAGE PROCESSING AIMER
- This measures headlight beam at 25 feet and can print a report for a tangible record of condition before repair and also condition after repair.
- REPLACEMENT UNITS
- Email for all information.
- Back To The Top Of The Page
