Generators & Starting Equipment
Special
|
- JOBBER LENGTH HIGH SPEED DRILL BITS
- Ideal for plastic, wood and steel. Hardened and tempered for long use in electric or air drills. Carded
- 3/8" REDUCED SHANK BITS
- High speed bits designed to fit drills with 3/8" or larger chuck. Carded.
- 1/4" REDUCED SHANK BITS
- High speed 4" bits designed to fit drills with chucks 1/4" or larger. For general purpose drilling in plastic, wood or steel. 118 degree split point prevents walking. Carded.
- COBALT DRILL BITS
- For drilling stainless steel and other hard abrasive material. Withstands drilling heat. Jobber length. Rugged 135degree split point provides easier penetration. Carded.
- TITANIUM-COATED DRILL BITS
- Last up to six times longer than high speed steel. 135 degree split point penetrates 75% faster, requires 25% less power and produces an improved hole finish. Bits can be resharpend. Carded.
- 12" EXTRA LONG DRILL BITS
- Industrial duty bits for extra reach and deeper drilling applications. 135 degree split points won't slip. For steel, wood and plastic. Carded.
- 1/2" REDUCED SHANK HIGH SPEED TWIST DRILLS
- For electric drills and drill presses. Special points make it easier to drill big diameter holes in steel and other hard materials. All bits 6".
- Back To The Top Of The Page
- ATD HIGH SPEED STEEL HOLE SAWS
- These are industrial quality hole saws. High speed cutting edge is welded to alloy steel back for the smoothest possible operation. designed to cut accurate and clean holes in any machinable material. Alloy or stainless steel must be cut with very slow speed. Depth of cut 1-18".
- HOLE SAW MANDRELS
- ATD-M24 Mandrel - 1/4" hex shank, 1/4" chuck size. ATD-M45 Mandel - 7/16" hex shank, 1/2" chuck size. ATD-M45P Mandel - 7/16" hex shank, 1/2" chuck size. ATD-PD4 1/4" drill bit - Standard Pilot Drill Bit.
- HOLE SAW SET
- ATD-8 ATD 7-Pc. HOLE SAW SET
- High speed bi-metal deep cut hole saws include sizes 7/8", 1", 1-1/8", 1-1/4", and 1-1/2" plus mandrel and thread adapter in blow molded case.
- ATD-9205 ATD 1/8" DOUBLE ENDED DRILL BIT - $5.57
- The sturdy double end allows for twice the usage. Ideal for auto body work. 12 per pack.
- ATD-9206 ATD 1/8" STUBBY DRILL BIT -
- This tough stubby bit is recommended for body work and shallow drilling work. Starts cutting immediately upon contact. Length 2". 12 per pack.
- STEP DRILL BITS
- GEN-825 GENERAL HARDWARE DRILL BIT SHARPENER -$27.98
- A precision tool for accurately sharpening twist drill bits. For machine shops, garages, home workshops and for all drill users. For fractional drills 1/8" to 3/4". For number size drills 1 to 30, for letter size drills A to Z, and for millimeter size drills 3 to 19mm. Used with bench grinder.
- MAR-39100 MARSON 1/8" COUNTERSUNK DRILL BIT-$8.90
- Double ended. for 1/8" diameter blind rivets. A must for body shops.
- VER-10166 VERMONT AMERICAN ALUMINUM DRILL BIT STAND -$7.10
- Holds 29 fractional size drills - 1/16" to 1/2" by 64ths. Doubles as a handy gauge for sizing drills.
- Back To The Top Of The Page
- HIGH SPEED STEEL SETS
- ATD-9220 ATD 29-Pc. HIGH SPEED TWIST DRILL SET - $65.08
- Professional quality jobber length twist drills in sizes 1/16" - 1/2" by 64ths. Packed in a sturdy, self rising steel index case with drill sizes clearly stamped for easy identification.
- VER-10144 VERMONT AMERICAN 29-Pc. JOBBER LENGTH SET -$104.29
- Sizes 1/16" to 1/2" by 64ths. Organized in hinged index within a steel box with bit sizes clearly visible.
- VER-10161 EMPTY DRILL BIT INDEX -$$12.55
- Marked index spaces for 29 bits, sizes 1/16" to 1/2". (Bits not included).
- VER-10492 VERMONT AMERICAN 29-Pc. 3/8" REDUCED SHANK SET -$109.72
- Sizes 1/16" to 1/2" by 64ths. Packed in steel box with hinged index. Bit sizes clearly visible.
- VER-10245 VERMONT AMERICAN 13-Pc. JOBBER LENGTH SET -$16.65
- Sizes 1/16" to 1/4" in molded plastic case. Carded.
- VER-10445 VERMONT AMERICAN 15-Pc. 1/4" REDUCED SHANK SET -$36.69
- Sizes 1/16" to 1/2" plus center punch. Packed in molded plastic storage case with sizes clearly marked. Carded.
- TITANIUM SETS
- VER-12345 VERMONT AMERICAN 29-pC. SET -$219.55
- Sizes 1/16" to 1/2" by 64ths. All split point. Packed in steel box with hinged index. Bit sizes clearly visible.
- VER-12385 VERMONT AMERICAN 13-Pc. SET -$35.30
- Popular sizes 1/16"to 1/4" in molded plastic storage case. All split point. Carded.
- COBALT SETS
- VER-12645 VERMONT AMERICAN 29-Pc. SET -$223.30
- Sizes 1/16" to 1/2" by 64ths. All split point. Packed in steel box with hinged index. Bits sizes clearly visible.
- VER-12687 VERMONT AMERICAN 13-PC. SET -$35.75
- Popular sizes 1/16" to 1/4" (All split point) in molded plastic storage case. Carded.
- LEFT-HANDED DRILL BIT SET
- VER-13484 VERMONT AMERICAN 5-Pc. SET -$32.70
- Drill bits match straight flute screw extractor sizes No. 1 through No.5. Ideal for removing broken right-hand bolts and studs. Drill bit sizes 1/8", 3/16", 1/4', 5/16', 3/8".
- WIRE GAUGE
- VER-11781 VERMONT AMERICAN 60-Pc. WIRE GAUGE SET -$86.25
- Sizes 1-60, packed in rugged steel box with hinged metal index.
- VER-11783 VERMONT AMERICAN 20-Pc. WIRE GAUGE SET -$41.30
- Sizes 61-80 in metal index.
- Back To The Top Of The Page
- All taps are furnished in right-hand threads with special bright, hard chrome finish. All taps have the size drill use permanently marked on the tap. All plug style.
- FRACTIONAL TAPS
- MACHINE SCREW TAPS
- PIPE TAPS
- METRIC TAPS
- SPARK PLUG TAPS
- T-HANDLE TAP WRENCHES
- Sliding T-handle with spring tension holds handles in place, self-equalizing jaws. Carded. VER-21916 for use with tap sizes 0 to 1/4". VER-21917 For use with tap sizes 1/4" to 1/2".
- VER-21939 VERMONT AMERICAN SCREW PITCH GAUGE -$7.45
- Made with flat thread forms on the top of each blade. Gives screw pitches on V-threads. Packed in red vinyl display pouch. Range 10 to 40 U.S.
- VER-21911 VERMONT AMERICAN PROFESSIONAL TAP AND REAMER WRENCH -$15.75
- Hardened steel jaws. Adjusts easily by turning handles. takes taps 4-MS to 1/2". Carded.
- Back To The Top Of The Page
- HEX DIES
- Precision made of the highest quality carbon steel with bright, hard chrome finish that rust is rust resistant and will not tarnish. Dies are permanently marked with size and starting side. Carded.
- LARGE DIAMETER HEXAGON DIES
- VER-21931 VERMONT AMERICAN SOLID DIE STOCK -$8.00
- Designed to hold either 1" round or hexagon dies. Plain type. Strong, rugged for long service and accurate threads. Carded.
- VER-21932 VERMONT AMERICAN ADJUSTABLE GUIDE DIE STOCK -$14.95
- Designed to hold either round or hexagon dies. Three jaw self centering adjustable guides assures straight threads. Chromed steel handles. For 1" O.D. dies. Carded.
- VER-21914 VERMONT AMERICAN ECONOMY TAP AND REAMER WRENCH -$10.20
- Uses taps up to 1/2". Adjustable, knurled handles. Carded.
- Back To The Top Of The Page
- CLICK FOR PICTURE
- These taps and dies are made of extra tough steel tool steel. Sharp, clean cutting edges, hardened and tempered to cut smooth threads. All taps and dies have hard chrome finish which resists rust and will not tarnish. Plug taps are furnished in all sets in sizes to fill most requirements.
- FRACTIONAL SETS
- VER-21725 VERMONT AMERICAN 27-Pc. MECHANIC'S SET -$89.00
- Set includes 11 one inch hex dies, 11 taps, 1 die stock and 1 tap wrench, 1 T-handel tap wrench, 1 thread gauge, and 1 screwdriver. Packed in molded plastic case. Sizes range from 1/4"-1/2" both NF and NC plus 1/8 NPT.
- VER-21739 VERMONT AMERICAN 58-Pc. MASTER MECHANIC'S SET -$272.15
- Set includes 23 taps, 17 one inch hex dies, six 1-7/16" hex dies, 2 tap wrenches, 2 die stocks, 1 T-handle tap wrench, 1 screw pitch gauge, 1 screwdriver and 5 screw extractors sizes 1 thru 5 molded plastic case.
- METRIC SET
- VER-21750 VERMONT AMERICAN 58-Pc. METRIC MASTER MECHANIC'S SET -$300.50
- Set includes 23 taps, 23 one inch hex dies, 2 tap and reamer wrenches, 2 die stocks, T-handle tap wrench, 1 metric thread gauge, 1 screwdriver and 5 screw extractor sizes 1 thru 5 in molded plastic case. Coverage includes all sizes listed in VER1749 (except 3mm -.50) plus the following: 14mm-1.25, 14mm-2.00, 16mm-1.50, 16mm-2.00, 18mm-1.50, 18mm-2.50, 1/8-20 and 1/8-29 British Standard Pipe.
- FRACTIONAL/METRIC MASTER SET
- VER-21741 VERMONT AMERICAN 75-Pc. MASTER TAP & DIE SET -$252.50
- Contains 34 fractional taps & dies; 34 metric taps & dies; 2 T-handle tap wrenches; one 4-1/2" tap wrench; 1 adjustable die stock; 1 standard screw pitch gauge; 1 metric screw pitch gauge; 1 screwdriver. Same sizes contained in VER-21749 and VER-21729 sets.
- VER-21729 VERMONT AMERICAN 40-Pc. SUPER HEX MECHANIC'S SET -$132.50
- Set includes 17 taps, 17 one inch hex dies, 1 die stock, 1 tap wrench, 2 T-handle wrenches, 1 screw pitch gauge and 1 screw driver in molded case.
- HAN-24606 HANSON(R) 41-Pc. HEX TAP AND DIE SET -$
- Covers both fine and coarse threads in sizes 4-40 through 1/2"-20 plus 1/8 NPT. Set includes die stocks, tap wrenches, screw pitch gauge and screw driver in a rugged plastic case.
- VER-21749 VERMONT AMERICAN 40-Pc. METRIC SUPER HEX MECHANIC'S SET -$143.20
- Set includes 17 taps, 17 one inch hex dies, 1 tap and reamer wrench, 1 die stock, 2 T-handle tap wrenches, 1 metric thread gauge and 1 screwdriver in molded plastic case. Size and threads per inch include 3mm-.50, 3mm-.60, 4mm-.70, 4mm-.75, 5mm-.80, 5mm-.90, 6mm-1.00, 7mm-1.00, 8mm-1.25, 9mm-1.00, 9mm-1.25, 10mm-1.25, 10mm-1.50, 11mm-1.50, 12mm-1.50, 12mm-1.75, 1/8-28 British Standard pipe. Shipping weight 5 lbs.
- HAN-24317 HANSON(R) 41-Pc. TAP AND DIE SET
- Covers both fine and coarse threads in sizes 3mm-.50 through 12mm-1.75 plus 1/8 BSP. Set includes die stocks, tap wrenches, screw pitch gauge and screwdriver in a rugged plastic case.
- Back To The Top Of The Page
- POWER EXTRACTORS
- THE ALDEN DRILL-OUT(R) POWER EXTRACTOR
- 4 Pc. set allow the electric drill to do the work of removing broken studs. Instructions included. ALD-401S/H 1/4", 5/16", 3/8" AND1/2". ALD-450S #5, #6, #8, #10, #12 AND 1/4".
- STRAIGHT TAPERED FLUTE 5-Pc. EXTRACTOR SETS
- Designed to remove studs, screws, etc. Forged alloy steel, machined to permit tight grip for fast and easy removal of broken part. Sets contain 1/8", 3/16", 1/4", 5/16" and 3/8". ATD-300 ATD TOOLS. KDT-720 KD TOOLS. VER-21872 VERMONT AMERICAN.
- STRAIGHT FLUTE SCREW EXTRACTORS
- LIS-62900 LISLE 5-Pc. SUPER OUT SET -$15.25
- Just drill, insert Super out, hit with hammer and remove broken screw or bolt with wrench or ratchet. Works on left or right threads. Extracts bolts from 1/4" to 1/2".
- VER-21822 VERMONT AMERICAN 5-Pc. SPIRAL FLUTE SCREW EXTRACTOR SET -$9.50
- Set contains screw extractors No.'s 1, 2, 3, 4, 5 and on display card with instructions.
- VER-21825 VERMONT AMERICAN 6-Pc. SPIRAL FLUTE SCREW EXTRACTOR SET -$15.15
- Set contains screw extractor No.'s 1, 2, 3, 4, 5 and 6 in handy vinyl pouch.
- SPIRAL SCREW EXTRACTORS
- Precision made from American alloy steel. Its exclusive tapered thread design builds maximum tangential torque, provides quick and easy removal of broken bolts, screws and pipe. No hammer needed. Features the shatter-shield, a unique safety device that screens the stub being removed and prevents flying chips.
- STUD REMOVER
- OLD-2526 OLD FORGE STUD REMOVER -$26.25
- 1/2" drive. A compact and powerful tool that fits into hard-to-reach stops and losens hard to turn studs. the tighter the stud, the more firmly it is gripped. All high grade heat treated alloy steel. Capacity 1/4" to 3/4".
- Back To The Top Of The Page
- A complete range of Heli-Coil kits (10, 12, 14 and 18mm) are available for repairing damaged spark plug port threads in all types of engines. Each kit includes the appropriate reamer/tap, tool and stainless steel inserts required to repair a designated size thread.
- MASTER THREAD REPAIR KITS
- HEC-5621 HELI-COIL MASTER THREAD KIT -$200.07
- This combination kit carries a complete product inventory that solves a wide range of the most commonly experienced coarse thread repair problems. Kit is packed in a handy, custom molded case along with instruction sheet, drill specifications and product reference chart. Set contains thread sizes 1/4-20, 5/16-18, 3/8-16, 7/16-14, 1/2-13, plus all taps, installation tools and inserts needed.
- SPARK PLUG REPAIR KITS
- HEC-5334-14 HELI-COIL SPARK PLUG THREAD REPAIR KIT (M14 X 1.25) -$39.97
- Works on taperseat and gasket plugs and aluminum or cast iron cylinder heads. Includes expanding tool and pilot reamer to assure perfect alignment and eliminate drilling. Three insert lengths also included to accommodate all spark plug reaches. Positive mechanical locking feature means the insert will never come out.
- ATD-810 ATD RETHREADER KIT FOR 14MM SPARK PLUG PORTS - $14.66
- Solid steel inserts replace damaged threads and eliminate possibility of coil windout. Kit includes tap, reamer, four inserts in sizes 1/4" to 3/4" long, and complete instructions.
- RETHREADING TOOLS
- ATD-5299 ATD SPARK PLUG THREAD CHASER - $
- Combination 14mm and 18mm chaser services practically all makes and models of cars. Cleans and restores threads, removes carbon and corrosion. Hex body allows to be used with deep wall spark plug sockets. Each end slightly tapered for ease in starting plug hole.
- THREAD RESTORING FILES
- Does a fast renewing job on damaged threads on any diameter, right or left hand. Select the proper clearly marked size, overlap in a few good threads and use just like a file. Length 8-1/2".
- OTC-7402 OTC UNIVERSAL OUTSIDE THREAD CHASER -$97.95
- Precision dies restores threads to their original condition to make reassembly of matching parts faster and easier. The aluminum alloy V-pad will not damage the threads. Capacity from 1-1/4" to 5" O.D. 4, 5, 6, 7, 7-1/2, 8, 9, 10, 11, 11-1/2, 12, 14, 16, 18, 20 and 24 threads. OTC-202817 3 DIE METRIC THREAD CHASER-1mm, 1.25mm, 1.5mm, 1.75mm, 2mm, 2.5mm, 3mm, 3.5mm and 4mm dies. (For use with OTC-7402)
- HEX RETHREADING DIE SETS
- Renews damaged threads on shafts, studs, etc. Can be used with wrench or socket. Across-the-flats same as matching nut. VER-21985 8-Pc. set - 1/4" thru 3/4" NC thread sizes in plastic case. VER-21987 8-Pc. set - 1/4" thru 3/4" NF thread sizes in plastic case.
- Back To The Top Of The Page
- ATD-9515 ATD FILE CARD
- Removes filings and other foreign matter from the grooves of files and other cutting tools. Especially used on the finer cut files. Length 10".
- ATD METAL FERRULED FILE HANDLES
- Birchwood handle will not split, nor can ferrule come off. ATD-9510 Foe files 6" to 8". ATD-9511 For files 8" to 12". ATD-9512 For files 12" to 16".
- MILL BASTERED FILES
- HALF ROUND FILES
- NIC-21858 HALF-ROUND BASTARD - DISPLAY CARDED 10". NIC-05094 HALF-ROUNDED BASTARD 12".
- ROUND FILES
- ROUND SMOOTH CHAIN SAW FILES
- NIC-01765 CHAIN SAW FILE - 3/16" DIAMETER 8". NIC-01888 CHAIN SAW FILE - 7/32" DIAMETER 8".
- TAPER FILES
- NIC-21866 SLIM TAPER - DISPLAY CARDED 6". NIC-21869 SLIM FILE - DISPLAY CARDED 8".
- VER-60150 VERMONT 4-Pc. FILE SET -$15.49
- Contains 8" 4-in-1 rasp, 6" mill, 6" slim taper and 6" round.
- Back To The Top Of The Page
- ATD-4100 ATD DELUXE HACKSAW - $34.22
- Features extreme rigedty, no wobble, cuts flush against a surface, compact, lightweight, blade storage chamber with 12" blade.
- ATD-4101 ATD TUBULAR HACKSAW -
- Adjustable for 10" or 12" blades. Frame will not twist. Rugged design insures alignment. Comfortable handle with non-slip grips.
- ATD-4102 ATD HACKSAW
- Quality hacksaw with less blade wobble, adjustable for 10" or 12" blades. Metal bound plastic handle.
- ATD-4103 ATD ECONOMY HACKSAW
- Economy hacksaw for use with 8", 10" and 12" blades. Throat depth is 3-1/8" for a deep cut. made from heavy duty steel with hi-impact plastic pistol grip handle.
- HIGH SPEED MOLY STEEL FLEXIBLE BACK HACKSAW BLADES
- HIGH CARBON STEEL HACKSAW BLADES
- General purpose blades for the occasional user and for cutting jobs where tougher metals will not be encountered.
- BIMETAL HACKSAW BLADES-12" LENGTH
- These bimetal Hacksaw Blades provide the finest sawing performance. They are shatterproof and last up to 5 times longer than standard blades. High speed steel cutting edges electronically welding to alloy spring steel backs. One per card. VER-48265 $2.65 18 TEETH PER INCH. VER-48266 $2.66 24 TEETH PER INCH. VER-48267 42.65 32 TEETH PER INCH.
- Back To The Top Of The Page
- CLICK FOR PICTURE
- COLUMBIAN PROFESSIONAL SHOP VISES
- One of the most popular vises in the industry. Each features a swivel locking base to better position your work, replaceable heat-treated steel jaw caps and Acme threads, extra large back anvil horn, and rugged steel front jaw beam for years of dependable service. made in the USA.
- CBN-4500 RESERSIBLE JAW PROFESSIONAL VISE -$
- Life Time Warranty. This vise has a jaw width of 5-1/2" with a jaw opening of 6" & 9-3/4". It has a 26 sq. inch anvil surface with 3-3/4" throat depth and a 360 degree swivel. The pipe jaw capacity is 1/2"-3". Includes double lock down bolts.
- C-CLAMPS
- Bright plated malleable iron frames, steel screws, swivels and sliding cross-pin handles. Made in the USA.
- WILTON MECHANIC'S VISES
- A great buy for the professional mechanic. Features include unbreakable box frame and steel channel, 360 degree swivel base with double lockdowns, 30,000 PSI strength on stress parts, and replaceable steel serrated jaw inserts and pipe jaws. Two year warranty.
- WILTON MACHINIST'S VISES
- These models are built for maximum quality and performance. 60,000 PSI strength on main stress parts 360 degree swivel, replaceable jaw inserts. 3 year warranty.
- Back To The Top Of The Page
