Special
|
- BELAIRE COMPRESSORS
- Belaire stationary single & two stage compressors, portable compressors
- ATD PORTABLE COMPRESSORS
- ATD's electric and gasoline portable air compressors are available in twin cylinder units. The twin cylinder units feature large capacity pumps and are designed to operate most air tools and devices. The gasoline models don't need a separate power source, so they can be tucked to remote areas to offer you even more portability on the job.
- SINGLE STAGE PORTABLE COMPRESSORS FEATURE: flex leaf valve system that increases
air efficiency, provides quieter operation, minimizes valve replacement. ATD's strategic
use of aluminum and cast iron in portable pumps allows maximum heat dissipation while
retaining the superior operational characteristics of cast iron. Electric motor designed
specifically for air compressor applications (select models available with gasoline driven
engines). Petcock drain valve for draining moisture from the receiver. Grounded three-wire
power cord. 15' two-braid air hose with metal air chuck. Bleeder two position pressure
switch (automatic cycling-off)
is standard on models. Durable wheels properly matched to compressor size and weight.
One-piece reinforced axle provides maximum strength and stability. Compressors are shipped
complete with oil. ready to use. Metal belt guard included. One year limited warranty.
ATD H.P., ASME Tank Size, Cylinders Maximum pressure, SCFM @90 PSI. Voltage, Weight lbs. ATD-9853($733.85) 3 HP, 25 gallon, 2 Cyl. 120 psi., 8.4 115V., 165 lbs. ATD-9855($900.36) 5 HP, 25 gallon, 2 cyl. 120 psi., 10.6 230V., 170 lbs. ATD-9856($1515.00) 5(gas), 20 gallon, 2 cyl. 120 psi., 9.1 gas, 163 lbs.
- ATD PORTABLE AIR TANK
- Take it anywhere! This ATD portable air tank is the answer when you need up to 125 PSI compressed air in remote locations for small jobs. This tank is an excellent reserve air source for cleaning and inflating. An air line shut-off valve with pressure relief valve, pressure gauge and 4 ft. air hose with an air chuck is included ATD-9898($60.57) (also available are replacement parts)
- CH-VS6231-Z CAMPBELL & HAUSFELD 4.5 PORTABLE COMPRESSOR $572.32
- 20 gallon portable compressor
- Back To The Top Of The Page
- SINGLE STAGE COMMERCIAL AIR COMPRESSORS
- Use an ATD commercial air compressor when you need more air power than a portable air compressor can deliver. These units are ideal for shops, farm and other applications where a moderate amount of air is required. These commercial models are rated 50% on, 50% off duty cycle. The 5 HP units are stocked with vertical tank mounting. Horizontal tanks are available as a special order.
- COMMERCIAL AIR COMPRESSORS FEATURES: Flex leaf valve system that increases air efficiency, provides quieter operation and minimizes valve replacement. Aluminum pump with cast iron cylinder sleeves allow maximum heat dissipation while retaining the superior operational characteristics of cast iron where wear is a concern. Large capacity, dual external filters with replaceable elements. Petcock drain valve for removing moisture from the receiver. Grounded three-wire power cord. ASME coded tanks. Compressors are shipped complete with oil, ready to use. Bleeder pressure switch for loading starting. ATD-9864($1195.00) 5 HP, 60 gallon/vertical, 2 cylinders, 120 maximum psi., 10.6 230v SCFM 90 PSI. 240 lbs.
- TWO STAGE INDUSTRAIL AIR COMPRESSORS
- Two stage industrial air compressors are ideal for jobs where the units run more frequently or where both higher PSI and CFM are required. Two stage compressors are more efficient in maintaining higher air pressures(PSI) and greater air volumes (CFM) per horsepower, than single stage compressors. This is important when operating more than one air tool or other air accessory. The two stage unit's inner cooling system provides cooling discharge temperatures which allow higher discharge pressures. Two stage compressors have two or more cylinders.
- TWO STAGE ALUMINUM PUMP FEATURES: Aluminum heads, coolers and crankcases that allow excellent heat dissipation. Heavy duty ball bearing construction on main crankshaft supports. Fully balanced forge steel crankshaft, splash type lubrication and filters with replaceable elements. ASME coded tanks. Completely enclosed metal belt guard. TOPS unit includes built-in mag starter.
- TWO STAGE CAST IRON PUMP FEATURES: Crankcase, cylinders and heads are cast iron.
Hardened steel disc valves provide long life and higher performance. Ductile iron
crankshaft is fully balanced, not welded or pinned. Oversize taper roller bearing
construction. Splash-type lubrication. Centrifugal unloader releases pressure on
compressor head to reduce load on motor when compressor starts. Large diameter, cast iron
flywheel provides maximum cooling. Gas engines are equipped with electric starters.
Compressor runs at low speeds, resulting in longer life. Flex-leaf valves and metal
guards. Magnetic starter included.
ATD H.P. Voltage/Phase Tank Size ASME Pump SCFM 100 PSI. SCFM 175 PSI. Operating Pressure Weight ATD-9931($1976.00) 5 Tops 230/1 80 Gal. Vertical Aluminum 18-16 145-175 455 lbs. ATD-9938($2190.00) 5 HP 230/1 80 Gal. Vertical Cast Iron 18-16 145-175 620 lbs. - LARGER SIZES AVAILABLE 7-1/2 HP, 10 HP, 20 HP, AND BIGGER
- CH-VT6275-Z CAMPBELL & HAUSFELD 6.5 VERTICAL COMPRESSOR $782.52
- 60 gallon. Twin cylinder, cast iron pump. 230V sincle phase, ASME tank.
- Back To The Top Of The Page
PORTABLE AIR COMPRESSORS
STATIONARY AIR COMPRESSORS
- RECOIL AIR HOSE
- Nylon tangle-proof design stays permanently coiled. The 360 degree swivel fittings eliminate twisting and hose end damage. Working pressure to 200 psi. Comes equipped with spring guards and 360 degree swivel fittings.
- AIR WHIP HOSE
- Recommended for every air tool. For use between tool and air hose. Couplers connected directly to air tool put excessive strain on the tools threads and increase overall bulk. Whip hoses eliminate this problem.
- SWIVEL END SNUBBER HOSES
- Absorbs shock to couplers from impact tools and/or air hammers. Each handles 250 lb. working pressure, 1000 ib. burst strength. All 1/4" and 3/8" I.D. snubber hoses are fitted on one end with the full 360 degree steel swivel end for easier use and greater flexibility.
- FOUR BRAID AIR HOSE
- High quality 4-spiral reinforced construction. Tough abrasion-resistant rubber cover with double reinforcement of sturdy rayon. Working pressure up to 250 psi. 100% material and workmanship warranty for 2 years.
- PVC AIR HOSES
- Hoses have 300 psi working pressure, 1200 psi burst pressure. Includes vinyl guards on both ends. Various colors available. 100% Material and workmanship warranty for 2 years.
- REELCRAFT LOW PRESSURE AIR/WATER HOSE REELS
- The ideal small capacity reel for all general air or water applications. Incorporates comtenporary engineering and manufacturing techniques for trouble free performance. Max. temperature 150 degrees, 3/8" reel inlet NPTF(F).
- Back To The Top Of The Page
AIR HOSE & HOSE REELS
- Click For Picture
- MILTON FILTER, REGULATOR AND LUBRICATORS (F-R-L)
- The Milton deluxe filter, regulator and lubricator (F-R-Lis the answer wherever air tools are used. These units offer the convenience of minimum installation time into your compressed air system. Milton trios prevent costly damage to air tools caused by rust, scale and moisture, while providing proper air flow control and continuous lubrication. Supplied with automatic overnight drains.
- DELUX FILTER, REGULATOR DUOS (F-R)
- Like the F-R-L trios, the Milton filter regulator duo is from the quality line of filters and regulators. Offered in the popular size ranges, the Milton deluxe duo will fit into most any air line system.
- MIRCO FILTERS
- Designed for the efficient removal of harmful foreign matter such as condensed moisture, pipe scale, dirt and rust from the air stream. The Milton micro filter features a large filter area of porous bronze giving less pressure drop and longer cleaning intervals, a three-stage baffle system for more efficient moisture removal, quick bowl removal for cleaning or changing filter elements. For trouble free compressed air systems a Milton filter is a necessity.
- HEAVY DUTY REGULATORS
- The Milton heavy duty regulator offers stable downstream air pressure over a wide range of air flows, with accurate control and fast response. Features such as, a balanced piston for greater stability, rugged Buna-N diaphragm and (O) rings, molded rubber seat, aluminum die-cast construction and fast, easy service are indicative of the standards Milton has maintained over the years. 40-125 Degree operating temperatures, 300 psi. inlet pressure, standard 0-125 psi. outlet pressure. pressure gauge not included.
- MILTON PRESSURE GAUGE
- Rugged with tough polycarbonate case gives lifetime service even under most severe conditions. 2" face with 1/4" center back mount for use in standard size regulators. 1/4" NPT. 0-160 psi pressure range.
- PRECISION LUBRICATORS
- Milton precision lubricators are ideal for lubrication of air motors, tools valves or where low air flow is encountered, and where extremely fine adjustments are necessary. Milton lubricators are the logical choice trouble-free protection and tamper-proof reliability. Lubricator bowls may be filled without shutting down line pressure.
- LNC-82413 LINCOLN AIR CONTROL ASSEMBLY- $71.60
- For pressures or 0-200 psi. Adjustable from fully opened to closed. Inlet and outlet 1/4" NPT female. Includes LNC-66100 air gauge, and LNC-600004 air regulator.
- LNC-66100 LINCOLN AIR PRESSURE REPLACEMENT GAUGE- $18.25
- Registers pressure 0-200 psi. 2" diameter dial, 1/4" NPT male.
- Back To The Top Of The Page
AIR LINE ACCESSORIES
- QUICK COUPLERS AND NIPPLES
- Every coupler has a check valve which automatically shuts off the air the instant the unit is disconnected. Standard couplers and nipples are for normal automotive use, heavy duty couplers have large air volume, and nipples are case hardened, Extra heavy duty couplers and nipples allow the largest air volume available.
- MIL-701 UNIVERSAL COUPLER REPAIR KIT- $2.09
- Includes one pin, spring and washer(MIL-768)
- MIL-S711 QUICK COUPLER SET, MILTON AIR HOSE REUSABLE MENDER COUPLLINGS, BRASS HOSE MENDERS, BRASS HOSE ENDS, MILTON AIR HOSE REUSABLE COUPLINGS
- Back To The Top Of The Page
AIR LINE COUPLERS NIPPLES
- ATD-6752 ATD AIR REGULATOR- $4.55
- For air tools not originally equipped with air regulators. Fits any 1/4" NPT female air inlet opening.
- ATD-6753 ATD AIR CONTROL GAUGE- $12.65
- Adjusts air pressure at the air tool. Ideal for spray guns to avoid costly painting errors, such as poor color match, runs, poor coverage, orange peel, etc. With accurate 0-160 ib gauge. 1/4" NPT air inlet, 1/4" FPT air inlet, swivel fitting.
- MILTON AIR LINE CHUCKS
- Milton sealing type chucks. Not to be used with automatic inflator gauges. Dual head chuck, straight head air chuck, safety grip chuck clip, male air chuck, kwik grip safety air chuck, single air chuck with safety grip, single air chuck.
- MILTON AIR HOSE REPAIR KIT
- Contains female chuck, male hose end, hose mender and clamps. All parts needed to make permanent on the spot repairs of 1/4" I.D. hose.
- Back To The Top Of The Page
AIR LINE EQUIPMENT
- Click For Picture
- Button style, Milton adjustable style, Milton air chuck nozzle, Milton lever style.
- MIL-S165 MILTON DELUXE MULTI-PURPOSE BLO GUN KIT- $32.67
- 4 blo guns in one. Adjustable trigger for precise air control. 1/4" NPT air inlet. Performs a multitude of jobs including sand blasting, cleaning, spraying, liquid transfer and drying. Includes sand blast siphon nozzle, multi-purpose nozzle, standard and high volume safety nozzle, and storage handle for unused nozzles.
- Back To The Top Of The Page
