- CLICK FOR PICTURE
- ELECTRIC POLISHERS
- BDT-6138 BLACK & DECKER BUFFMASTER(tm) ELECTRONIC POLISHER- $351.00
- Electronic module provides a wide range of full, constant power. Variable speed switch allows slower RPM's forfeathering. At 8 amps, it's Black & Decker's most powerful polisher motor, and can handle the toughest jobs. Metal gear housing, 5/8-11 spindle thread. Uses 7"/9" pads. Variable speed control from 0-1000/3000 RPM and lock-on button for convenience. Weight 8-1/4 lbs.
- BDT-6124 BLACK & DECKER HEAVY DUTY 7"/9" ANGLE POLISHER- $255.00
- Powerful 7 amp AC/DC motor with high efficiency cooling system for long life. Ball bearing construction for efficient operation. Glass filled nylon motor housing for durability. Heat treated, precision cut gears for smooth, quiet operation. 8' rubber power supply cord remains flexible at low temperatures. 2300 rpm no load speed, 5/8" - 11 spindle thread. 7" or 9" backing pad size. Includes reversible side handle, backing pad and clamp washer. 7.8 lbs.
- BDT-6121 BLACK & DECKER RIGHT ANGLE RANDOM ORBITAL POLISHER- $266.00
- This is an electronic Variable Speed Sander/Polisher that gives you 120 volts, AC only, from the 4.3/3.6 amp motor. It has a Controlled Finishing System with 100% ball bearing construction that accepts 6" hook and loop paper w/ 6 holes. Primarily used for swirl removal.
- BDT-6129 BLACK & DECKER HEAVY DUTY VARIABLE SPEED POLISHER- $304.00
- This powerful tool has a 7 amp motor which delivers a variable speed from 0-1750 RPM. Tool weighs 8 lbs. and the spindle is 5/8" - 11". Ball bearing for smooth operation and long life. Uses 7" or 9" pads.
- BDT-6127 BLACK & DECKER HEAVY DUTY POLISHER- $269.00
- This polisher delivers 1750 RPM from a 7 amp motor. It uses 7" or 9" pads on a 5/8" - 11" spindle. Built with ball bearings and heat treated precision cut gears for long life. Weighs 8 lbs.
- MKT-9217SPC MAKITA 7" ELECTRONIC SANDER/POLISHER- $359.24
- Variable speed 1,500-2,800 RPM. Electronic speed control maintains constant speed for maximum power and control. Features 6.8 amp motor, ball and needle construction for long life, double insulation for safety and soft start. Spindle thread 5/8" - 11" UNC, weight 7.7 lbs.
- CGI-1900 POLISHMASTER 9" RANDOM ORBITAL WAXER/POLISHER- $109.50
- This has a 9" diameter, 2400 OPM .85 amp motor, light touch push button. Quiet running and smooth handling. Compact, lightweight design effortlessly (floats) over surfaces.
- CGI-2300 POLISHMASTER 12" HEAVY DUTY RANDOM ORBITAL WAXER/POLISHER- $244.00
- This has an 12" diameter, 2500 OPM 1.8 amp motor, lock-on switch. Thermal protector. Four permanently lubricated heavy duty ball bearings for smooth running and long life. Wide plattform top with heavy duty, non-skid ring for stability.
- CGI-2100 POLISHMASTER 11" RANDOM ORBITAL WAXER/POLISHER- $174.00
- This has an 11" diameter, 2100 OPM 1.5 amp motor, light touch push button, contoured handle. Precision counterweight for quiet, vibration free operation.
- Back To The Top Of The Page
- FAST CHANGING BUFFING PADS/HOOK AND LOOP SYSTEM
- 7-1/4" diameter round-up pads are 100% wool and have a 1-1/2" pile height. Hook and loop attachment. 3M & Schlegel.
- ATD-8530 ATD BUFF PAD CLEANER- $4.65
- Breaks compound build-up without removing pad from polisher. Ends the screwdriver method and extends buffer pad life.
- 3M SUPERBUFF(R) POLISHING PADS
- Double-sided soft-edged pads get into tight areas and reverse curves more easily. Features include long life, flexibility and light weight. Prevents edge burn.
- VER-16900 VERMONT AMERICAN MAXI-BUFF PAD MERCHANDISER- $91.90
- A multi-purpose buffing/polishing pad for use with standard electric drills. Operates in 1/4", 3/8" and 1/2" electric drills. Pile made of 1" natural wool and durable synthetic fiber. 5-1/2" diameter with rounded edge. Excellent balance. Washable. Contains 12 pads with manual in colorful counter merchandiser.
- Back To The Top Of The Page
- MGL-W1000 MEGUIAR'S HI-TECH FINESSE POLISHING PAD- $13.66
- Foam pad glued to perament baching plate for unparalleled performance and results.
- MGL-W5500 MEGUIAR'S 5-1/2" HI-TECH FINESSE POLISHING PAD- $13.66
- Same as W1000. Both create added gloss and depth of color on all types of fiberglass finishes without creating swirl marks.
- MGL-W6000 MEGUIAR'S PROFESSIONAL HI-TECH FINESSE POLISHING PAD WITH BUILT-IN DUAL ACTION ADAPTER- $13.66
- Easily eliminates swirls and hazing while producing a high gloss finish. Safe on all paint finishes including clear coats.
- MGL-W7000 MEGUIAR'S SOFTBUFF CUTTING PAD- $11.57
- This pad sets the standard for optimum performance and reduced surface friction for foam cutting pads.
- MGL-W9000 MEGUIAR'S SOFTBUFF FINISHING PAD- $11.95
- This pad is the finishing touch that quickly produces a perfect finish every time on every paint finish.
- MGL-W65 MEGUIAR'S BACHING PLATE- $19.97
- The new self-centering feature assures proper pad balance fast pad changes with Velcro(R) fasteners.
- CGI-W80 CHAMBERLAIN 11"/12" 9 OZ. TERRY CLOTH BONNET- (2)$8.07
- 100% cotton terry cloth, washable and reusable.
- CGI W85 CHAMBERLAIN 11"/12" 11 OZ. TERRY CLOTH BONNET- (2)$8.95
- Heavy duty 100% cotton terry cloth bonnet. Washable and reusable.
- BDT-74652 BLACK & DECKER 8" TERRY CLOTH BONNET- $5.07
- Back To The Top Of The Page
- CLICK FOR PICTURE
- CPT-864 CHICAGO PNEUMATIC RANDOM ORBITAL AIR SANDER- $171.79
- Best for blending and smoothing filler, feather edging and pre-paint preparation. Use the orbital motion for fine finishing and the rotary motion for rapid material removal. Balanced counterweight design, automatic release throttle with positive stop action. Sure-grip insulated handle, built-in speed regulator, crossbolt-style hub mounting, full 1/2 h.p. motor, heavy duty ball bearing construction. Circular exhaust diffuses air flow. Heavy duty 6" pad with flexible molded edge included.
- CPT-870 CHICAGO PNEUMATIC DUAL ACTION SANDER- $77.00
- This sander has both rotary and orbital motion for rapid removal as well as fine finishing. It has a speed regulatory to match speed to the job. It has a lock-off throttle for safety, along with an insulated grip for operator comfort.
- IRC-311 INGERSOLL-RAND HD AIR DUAL ACTION QUIET SANDER- $99.95
- Swirl free sander for feather edging, metal prep and finish work on body filer. Features a built-in silencer, vibration-free ball bearing construction and built-in regulator.
- HTN-4500 HUTCHINS RANDOM ORBITAL SUPER SANDER- $226.95
- Random orbit, multi-action sander for super fine surface preparation, Low Profile and balanced to reduce fatigue. Vibration-free motor insures full-contact sanding to reduce abrasives costs and assure better finishes. Unique motor design generates more power from less air. Includes one HTN-5106 standard replacement pad. 76 dBa sound level.
- Back To The Top Of The Page
- CLICK FOR PICTURE
- CPT-777 CHICAGO PNEUMATIC ORBITAL AIR SANDER- $267.22
- Ideal for body filler shaping on large flat surfaces. The orbital motion is also excellent for blending and smoothing body filler. It's large 8" diameter standard pad removes material faster than any other orbital sander with it's positive rotation and oscillating action to prolong abrasive life. Balanced counterweight design, sure grip insulated handle, built-in speed regulator. 1/2 h.p.motor, heavy duty ball bearing construction. Circular exhaust, heavy duty pad with flexible molded edge. Automatic release throttle with positive stop action. Includes one CPT-KF134255, standard 8" replacement pad.
- HTN-3800 HUTCHINS ORBITAL AIR SPEED SANDER- $242.95
- Constant stroke does not change with high or low air pressure. Patented self tightening paper clamps always keep abrasive tight. Specially designed pad prevents loading and extends abrasive life. Fingertip air control. Built-in air regulator. Five point suspension ensures 44 sq, inches of uniform, full contact sanding with each stroke.
- IRC-312 INGERSOLL-RAND ORBITAL AIR SANDER- $192.95
- Makes fast work of smoothing fiberglass, wood and body filler. 3-2/3" x 6-3/4" pad. Features one-handed, palm grip operation, vibration-free ball bearing construction, automatic release safety lever, and built-in regulator.
- IRC-328A INGERSOLL-RAND GEARED 8" ORBITAL AIR SANDER- $N/A
- Enough smooth strength and power to remove heavy material and body filler on large, flat surfaces. Vibration-free dual-action motion lets you control contact with the work surface to produce clean, swirl-free finishes. Balanced ball bearing construction.
- HTN-7004 HUTCHINS ORBITAL (WATER BUG)- $238.95
- Designed specifically for water sanding. Features a unique thru-the-pad water feed to ensure constant fluid film between pad and surface. The result is quick elimination of surface blemishes on clear coats, and unblemished finishes on all surfaces. Sealed 4-bearing shaft assures full pad sanding. Comes complete with piece plate for perforating sandpaper.
- Back To The Top Of The Page
- CLICK FOR PICTURE
- CPT-877 CHICAGO PNEUMATIC DUAL PISTON SANDER- $149.95
- This smooth acting sander has safety guard to prevent pinching and a biased valve for smooth start-up along with a teasing throttle. It has 2-3/4" x 17-1/2" paper.
- IRC-315 INGERSOLL-RAND TWIN PISTON STRAIGHT LINE AIR SANDER- $185.95
- Has power to spare for smoothing down body filler, or shaping and leaving large flat surfaces. Reload easily with quick action paper clamps.
- HTN-2000 HUTCHINS STRAIGHT LINE AIR SANDER- $298.95
- The only 2-cylinder, common piston straightline with vertically engaged, twin drive gears, which eliminates jumping at the end of each stroke.
- VKG-V100 VIKING DUAL PISTON STRAIGHT LINE AIR SANDER
- The bodyman's favorite for over a generation. removes material rapidly. Reciprocal action reduces sandpaper build-up by 50%. Dual piston design provides power for biggest jobs. Converts from sanding to filling in 30 seconds. Only 7 moving parts.
- VKG-V101 VIKING MINI STRAIGHT LINE AIR SANDER
- Only 11" long. Perfect for tough straight-line sanding jobs on today's downsized vehicles. Low vibration and noise levels, with high power-to-weight ratio. Only 5 moving parts for easy serviceability.
- Back To The Top Of The Page
- CLICK FOR PICTURE
- CPT-778 CHICAGO PNEUMATIC HI-SPEED AIR SANDER- $107.95
- Durability, versatility and power make this high speed sander excellent for paint removal, shaping filler patches, weld smoothing, rust removal, etc. Variable speed control makes it useful for a variety of surface conditions and contours. Features built-in regulator, and rugged, energy efficient 1/2 h.p. motor. Comes with 3", 4" and 5" diameter backup pads. Ball bearing construction, lightweight for easy handling.
- IRC-317 INGERSOLL-RAND 5" HIGH SPEED AIR SANDER- $124.95
- For small jobs and hard-to-reach places. Ideal for feathering, light sanding and rust removal. Comes complete with three backing pads. Built-in regulator lets you match speed and power to the job.
- AST-222T ASTRO PNEUMATIC 5" HI-SPEED AIR SANDER- $53.65
- This sander delivers vibrationless performance with 20,000 RPM. It includes a 3" and 4-1/4" phenolic backing pad and hub wrench. It has a built-in regulator and a direct drive motor with handle exhaust.
- CPT-865S CHICAGO PNEUMATIC VERTICAL AIR SANDER- $342.72
- Variable power control handles most general purpose jobs with full speed sanding. Good for roughing in body filler, weld smoothing, paint and rust removal. Automatic release throttle with positive stop action. Muffled handle exhaust to vent air away from work surface. Rugged 1 h.p. motor, double idler planetary gearing , heavy duty ball bearing construction. Includes 7" back-up pad. Variable speed control. 5/8"-11" spindle size.
- CPT-869S CHIGAG0 PNEUMATIC ANGLE AIR SANDER- $354.15
- Excellent for heavy rust removal, sanding of metal and shaping of contoured filler patches. Features low profile and offset handle. 1 h.p. motor, automatic release trigger with positive stop action, contoured throttle control for easy handling. Muffled rear exhaust, built-in air regulator. Dead handle mounts on either side for right or left hand operation. hardened and ground spiral bevel gears for low vibration. Includes 7" sanding pad and locknut. Ball bearing construction. 85 sound level (dBa). 16" overall length.
- Back To The Top Of The Page
- CLICK FOR PICTURE
- BDT-6112 BLACK & DECKER 7" ELECTRIC SANDER- $279.00
- Perfect for body shops and fleets. Powerful 10 amp motor with high-efficiency cooling system for long life. Sealed trigger, nylon break resistant handle. Includes side handle, trigger locking pin, tool rest, 3-1/2" quick change backing pad, 7" phenolic disc and clamp washer.
- BDT-4074 BLACK & DECKER 7" RIGHT ANGLE GRINDER- $235.00
- This 3 HP high-powered grinder delivers 6000 RPM and comes with 3 position side handle, rotating guard and spindle lock for easy wheel changing.
- GRINDERS/ GRINDER ACCESSORIES
- Back To The Top Of The Page
- CLICK FOR PICTURE
- BDT-2750 BLACK & DECKER 4-1/2" AC/DC SANDER/GRINDER- $159.00
- 8' rubber power cord, precision heat-treated gears for long life. Paddle switch allows operation with gloves. Has lock-on for easy operation. Spindle lock for easy wheel changes, high airflow for cool operation. Ball bearings for smooth operation. standard equipment includes 4-1/2" depressed center wheel, backing flange, clamp nut, spanner wrench, side handle, and guard.
- MKT-N9514B MAKITA 4" DISC GRINDER- $109.24
- AC grinder, double insulated for operator safety. Motor has overload protection to prevent burnout, and ball and needle bearing construction for long life. Standard equipment includes side handle, depressed center wheel, lock nut wrench, wheel guard, and clamp nut.
- CPT-854 CHICAGO PNEUMATIC 4" ANGLE AIR GRINDER- $379.95
- For tough, tight spot cleaning job that require fast metal removal. Perfect for weld preparation and smoothing, rust removal, deburring and bleeding of steel, cast iron and aluminum (Grinding wheel #ATD-8344 is not included).
- QUICK CHANGE FLEX BACKING PADS
- Use with ATD-8375($4.99) clamp washer. Fits any 5/8" x 11" spindle. ATD-8365($10.42) 5", ATD-8366($13.83) 7".
- PHENOLIC BACK DISCS
- Ideal for grinding and sanding. 7/8" I.D. hole. Maximum 6000 rpm speed. ATF-8370($5.68) 5", ATD-8371($4.76) 7"
- CLAMP WASHER
- ATD-8375 For use on quick change pads.
- Back To The Top Of The Page
- CLICK FOR PICTURE
- BALDOR (BIG RED) HEAVY DUTY BENCH GRINDERS
- All grinders supplied with eyeshields. The 7: and 8" have exhaust type wheel guards. Specially designed motors for continuous grinding are approved by UL and CSA and also comply with OSHA. Extended tapered end plates make it easy to grind large, odd shaped pieces. equipped with prelubericated, heavy duty shielded type ball bearings, three-way adjustable tool rest, guard covers can be removed for buffing. Two grinding wheels included: 36 and 60 grit. all single phase 60 cycle motors.BAL-662R($217.97) 6" 1/3 HP MOTOR, 115 VOLT, 3600 RPM SPEED, 6' X 3/4" WHEEL SIZE, 1/2" SHAFT DIAMETER. BAL-762RE($369.85) 7" SIZE 1/2 HP MOTOR, 115 VOLTS, 3600 RPM SPEED, 7" X 1" WHEEL SIZE, 5/8" SHAFT DIAMETER. BAL-812RE($619.13) 8" SIZE, 3/4 HP MOTOR, 115/2320 VOLTS, 3600 RPM SPPED, 8" X 1" WHEEL SIZE, 3/4" SHAFT DIAMETER.
- BENCH GRINDER ACCESSORIES
- BALDOR EYESHIELDS
- Shatterproof plexiglass pane. Adjusts vertically to any position, tilts up, down or backwards. Fits Baldor and most other makes of bench grinders. Sold in pairs. BAL-GA10 6" bench grinder size, 5" x 4" shield size. BAL-GA11 7"-14" bench grinder size, 6" x 4" shield size.
- BAL-GA16 BALDOR PEDESTAL- $223.77
- For Baldor and other makes of bench grinders. Fits all 6, 7, 8, & 10". Cast iron construction. Height 32-7/8". base 15-3/4" x 14". Weight 61 lbs.
- ATD-8390 ATD WHEEL DRESSER- $21.94
- keeps bench grinder wheels clean, sharp and true. removes high spots.
- Back To The Top Of The Page
- CLICK FOR PICTURE
- RECIPROCATING SAWS
- MKT-JR3000V MAKITA VARIABLE SPEED RECIPROCATING SAW- $212.65
- Long 1-3/16" strokes for faster cutting, 0-2,300 strokes per minute gives you ideal speeds for all material. heavy duty 6 amp motor with ball and needle bearing construction for long life. Net weight 6.4 lbs., length 15-3/4". Comes with plastic storage case and extra blades.
- 14" CHOP SAW
- MKT-2414B MAKITA 14" AC/DC CUT-OFF SAW- $405.15
- Cuts up to 4" at 90 degrees and 45 degrees. Fold-down design with chain and carry handle for easy portability. No-load speed 3,800 rpm, 13 amp motor, net weight 36 ibs. Includes one wheel, and quick release vise.
- BDT-3935 BLACK & DECKER 14" 3.2 HP CHOPSAW- $377.00
- This 3.2 HP chopsaw is rated for heavy duty application. It has a 13 amp motor that delivers 3800 rpm no load speed. It can cut up to 4" pipe. It comes with a screw clamp system and pivoting fence for miter cuts.
- VER-28033 VERMONT AMERICAN 14" CUT-OFF SAW WHEEL- $13.65
- Fits Black & Decker, Makita and other leading chop saws. 14" diameter x 1/8" thickness x 1" diameter arbor hole.
- JIG SAW
- BDT-3153 BLACK & DECKER VARIABLE SPEED JIG SAW- $206.00
- Doubel insulated. Cuts intricate curves. 4.5 amps, 120 volts, 0-3100 strokes per minute. Cutting capacity 1/4" on steel, 3/4" nonferrous, and 2-3/8" on wood.
- VERMONT AMERICAN REPLACEMENT BLADES
- Back To The Top Of The Page
- PSA SANDING PADS
- Fully molded bonded construction, no glue, edges protected. Tough, durable, trouble free. Perfectly balanced to all random orbit sanders. Edge flexibility allows precise sanding control. tapered edge.
- EEZER GLUE-ON SANDING PAD
- EEZER STRAIGHT LINE SANDING SHOES
- Fully molded high strength aluminum. Uses standard 2-3/4" x 17-1/2" abrasive sheets. Fits most straight line sanders.
- ATD-QUICK CHANGE FLEX BACKING PADS
- Use with TAD-8375 clamp washer. Fits any 5/8" x 11 spindles. ATD-8365($10.42) 5", ATD-8366($13.83) 7", ATD-8367($18.70) 7" Spiral Flex.
- CLAMP WASHER
- ATD-8375 For use on quick change pads.
- PHENOLIC BACK DISCS
- Ideal for grinding and sanding. 7/8" I.D. hole. Maximum 6000 rpm. TAD-8370 5", ATD-8371($4.76) 7", ATD-8372($7.43) 9", EEZ-4300 Eezer backing plate set (3", 4-1/2", 5")
- CARBIDE BURR SET
- ATD-8160 8-Pc. CARBIDE BURR SET- $136.36
- Special automotive selection of 8 most-used 1/4" carbide burrs. Includes a hinged wooden storage box.
- ATD-8170 4 Pc. 6" LONG SHANKS DOUBLE CUT CARBIDE BURR SET- $97.90
- GRINDING STONES
- ALUMINUM OXIDE GRINDING STONES
- ATD-8290 ATD GRINDING STONE ASSORTMENT- $71.35
- Contains two each of the above eighteen sizes, complete with attractive display.
- ATD-8283 5 Pc. MOUNTED STONE SET- $12.86
- Set contains 1 each ATD-8266, ATD-8270, ATD-8276, ATD-8282.
- Back To The Top Of The Page
- ATD GRINDING WHEELS FOR BENCH GRINDERS
- Made of aluminum oxide abrasive, fully vitfrified and perfectly balanced for fast cutting.
- ATD-8390 GRINDING WHEEL DRESSERS
- The wheel dresser will do general dressing on grinding wheels up to 10" in diameter and up to 2" wide.
- ATD SILICON VITRIFIED GRINDING WHEELS
- For sharpening carbide lathe bits, carbide tip drills, etc. Not for general use. 6" diameter, 3/4" width, 1/2" arbor, 60 grit (Medium).
- ATD FLAP DISCS
- These abrasive flap discs grind faster and cleaner in one step than other two step operations. More economical in material costs, and time saved.
- ATD WELD GRINDING & CUTTING WHEELS
- All are reinforced raised hub disc wheels. Combination 5/8" x 11 thread mounting nut and back-up flange permanently built into each wheel.
- ATD-8344 ATD DRPRESSED CENTER WELD GRINDING & CUTTING WHEEL
- Back To The Top Of The Page
- WIRE WHEELS
- Filled with premium gauge oil-tempered wire for fast cutting and long life. Remove rust, scale, paint, etc.
- TWISTED TUFT WIRE WHEEL BRUSHES
- Knot type, heavy duty. For hard cleaning of heavy surface deposits, carbon removal from valves, tire buffing. Leave a burnished finish.
- ATD CUP BRUSHES
- For efficient cleaning of large surface areas. long lasting wire brushes give great flexibility in a wide varity of heavy duty applications such as edge blending and removal of surface film, rust, scale or paint.
- ATD END BRUSHES
- Shank diameter 1/4". For use with power tools. Ideal for removing carbon deposits, rust, paint, etc.
- VER-16804 VERMONT AMERICAN 30-Pc. WIRE WHEEL AND CUP BRUSH ASSORTMENT
- Attractively packed in point-of-purchase counter merchandiser.
- ATD HAND SCRATCH BRUSHES
- For removing paint, rust, scale, solder, dirt and for cleaning metal parts, files, etc.
- ATD STRINGER BEAD TWIST WHEEL BRUSHES
- These brushes are excellent for stringer bead weld cleaning and other applications where a narrow, 3/16" brush face is necessary to achieve the work.
- ATD FULL CABLE TWIST WHEEL BRUSHES
- made with larger knots than the Stringer Bead, this brush covers more surface in a single pass, on unconfined area applications. It is ruggedly constructed for heavy duty work.
- ATD HURRICANE WHEEL
- This design provides 30% greater cut and 35% greater life with less fatigue to operator. It has aggressive action, twist integrity and smooth action. ATD-8353 ($16.31) 4" knot style wire wheel.
- ATD-8245 ATD 2" ENCAPSULATED WIRE WHEEL 2" DIAMETER, .014 WIRE SIZE, 1/3" ARBOR
- Wire brush bonded in a synthetic material. Wire tips are firmly supported producing a very aggressive brushing action to assure a safe, well balanced brush that will outlast most conventional brushes. Uses for the brush include rust and heavy weld scale removal, removing heavy burrs in confined areas, and other typical wire brush applications.
- ATD KNOT STYLE CUP BRUSHES
- Use these rugged brushes for cleaning welds and for operating in tight places, such as corners, angle welds and T-connectors. This style is especially suited for pipe bevel cleaning.
- Back To The Top Of The Page
