- ROB-12134A ROBINAIR ENVIRO-CHARGE PLUS(tm) RECOVERY- $6450.00
- This station recovers, recycles, and recharges both R12 and R134a. It has a powerful 6 cfm Vacuumaster high performance vacuum pump. It has a built-in manifold with 96" Enviro-Guard(tm) hoses with Quick Seal(tm) fittings. It includes an electronic scale for accurate charging and recovery monitoring. It also has an oil-less compressor which prevents mixing of refrigerants and their oils. It has automatic air purge and includes two 50 lb. tanks; one for R12 and one for R134a.
- SOLAR FULL FEATURE AIR CONDITIONING SERVICE CENTER
- These units recover, recycle, evacuate and electronically charge refrigerant. The advance single pass technology allows recovery and recycling in less than 10 minutes. Recovery/recycling is automatic. Machine stops when all refrigerant is recovered. Electronic charging scale gives automatic charging in accuracy of + or - an ounce. Automatic venting of non condensable gases. Filters are changed at 300 lb. intervils to keep maintenance at a minimum. Includes 50 lb. storage tank, HD 1.5 CFM two stage vacuum pump, evacuation timer, compressor hour meter. UL listed.SOL-8100($5383.06) for R12 or SOL-8134($5447.78) for R134A.
- SOLAR FULL FEATURE AIR CONDITIONING SERVICE CENTER
- The advanced technology allows for recovery and recycling in less than 10 minutes. Recovery/recycling is automatic. Machine stops when all refrigerant is recovered. Recycled refrigerant is stored in 50 lb. tank. Filters are changed every 300 hours. Includes: 50 lb. tank, compressor hour meter. CSA certified.SOL-7100($3346.70) for R12 or SOL-7134($3470.73) for R134A.
- Back To The Top Of The Page
FREON RECYCLERS
- RECOVERY/RECYCLING/RECHARGING STATIONS
- These Robinair units combine all the features of model 17400A recovery/recycling machine with model 10295A Smart Cart(R) automatic charging station. Features single-pass recycling and refrigerant automatically is recycled while the system is being evacuated. Moisture indicator changes color when refrigerant is ready. Evacuation time is programmed, using the computerized touch pad. Charge can be programmed or controlled manually. Includes 15-volt 1/3 HP motor, one 50 pound refillable DOT approved tank, and electronic scale that provides accurate charging by weight and automatically shuts off when recovery tank is full. UL listed. Weight 160 pounds without tank. ROB-17700A($5085.00) Robinair for R12 systems. ROB-34700($5180.00) Robinair for R134A systems.
- RECOVERY & RECYCLING EQUIPMENT
- For dealerships, garages and repair shops. Single pass system automatically shuts off when recovery is complete. Control panel moisture indicator changes color to show when refrigerant is ready for reuse. Air purge indicator lets you know if air is in the tank - easy to vent. Comes complete with easy-to-change filter, two 30 pound refillable DOT approved tanks, heavy duty cart, and 1/3 HP 115 volt motor. Recovery rate 1/2 pound per minute, recycling rate 1 pound per minute, weight 120 pounds without tanks. UL listed.ROB-17400A($2865.00) Robinair for R12 systems or ROB-34400($2965.00) Robinair for R134A systems.
- Back To The Top Of The Page
RECOVERY/RECYCLING/RECHARGING STATIONS
- ROB-10354 ROBINAIR MANUAL CHARGING STATION FOR R-12- $1563.00
- Equipped with a quality manifold, 5-pound dail-a-charge heated cylinder and 1.2 CFM vacuum pump for fast, thorough evacuation and release. All mounted on a rugged, portable two-wheel chart. The charging cylinder is calibrated for R-12, R-22 and R-502, so it can also be used to charge motor homes and camper A/C units. Tank is extra. Weight 82 lbs.
- ROB-34050 ROBINAIR R-134A REFRIGERANT CHARGING STATION- $1521.52
- Same capacity as ROB-1035A.
- ROB-10295A ROBINAIR SMART CART R-12 AUTOMATIC CHARGING STATION- $2875.60
- Evacuation and charging are fast and simple to program with just a touch of the pad controls. Capable of changing most automotive systems, including passenger cars, trucks, buses, motor homes and refrigerated trailers. Handles both 30 and 50-lb. tanks. Easy to operate: just enter the time needed to evacuate and the amount of refrigerant (weight) to be charged, then press Start. Features included a heater blanket that fits up to 50 lb. tanks to help speed the refrigerant transfer, powerful 4 CFM tank for fast, thorough evacuation, front wheel manifold gauge set with two 120" hoses. with Quick Seal fittings and one 72" yellow center hose. Equipment is mounted on a 16-gauge steel cart. Tank extra. weight 108 lbs.
- ROB-34100 ROBINAIR R-134A REFRIGERANT SMART CART CHARGING STATION- $3082.14
- Same specifications as ROB-10295A
- ROB-43678B ROBINAIR DIAL-A-CHARGE CHARGING CYLINDER- $306.70
- 5-pound heated cylinder gives you an accurate and economical method of charging A/C systems according to factory specifications. Pressure gauge makes it simple to compensate accurately for temperature variations. Can be filled from bulk tanks of refrigerant.
- ROB-34945A ROBINAIR R-134A R-12 REFRIGERANT CHARGING SCALE- $690.00
- Delivers an accurate charge by weight automatically or manually. A solid state microprocessor provides consistent accuracy regardless of temperature. A solenoid stops the charge when the programmed weight has been dispensed, and an audible beep alerts you when the charge is complete. Uses 115 V AC power supply. Operating temperature 32-120 degrees.
- ATD-3000 ATD TANK CONVERSION KIT- $31.69
- Turn your empty freon tank into a usable air tank. No special tools required. Complete parts kit contains filler valve, air gauge, safety valve assembly, air hose assembly, chuck and four-way manifold.
- Back To The Top Of The Page
CHARGING EQUIPMENT
- OIL INJECTORS
- Excellent method to change oil. Can use with charging stations or manifold gauge set to measure and dispense oil. 2 pz. capacity. ATD-3524($50.55), R134a systems. ATD-3375($50.69), R12 systems.
- THERMOMETERS
- ATD-3509($10.11) or ROB-10597, Pocket analog thermometer 0-220 degrees, 1" dial.
- ATD-3518($14.92) or ROB-10945, Pocket analog thermometer 0-220 degrees, 1-3/4" dial.
- ATD-3025 R134A 72" HOSE SET- $75.52
- Anti blowback fitting on yellow hose meets SAE specs and is UL recognized. Red and blue hoses have 14mm x 1.5 and 1/2" ACME-F fitting. working pressure 600 P.S.I. with burst pressure of 3,000 P.S.I. Manual service quick connect coupler for R134A
- ATD-3673 ATD R134a 3 PIECE CHARGING HOSE SET
- ATD-3588, ATD-3589 MANIFOLD CONVERSION KITS
- CHARGING HOSES
- ATD charging hoses from 36", 72", 96" with ball valve or shut off valve with standard fittings
- Back To The Top Of The Page
AIR CONDITIONING ACCESSORIES
- ATD-3544 ATD PNEU-VAC VACUUM PUMP- $98.74
- Requires 90 psi shop compresses air supply. Produces 29.75 Hg vacuum at sea level. 1.3 cfm. Venturi creates vacuum. No oil. No moving parts. Completely maintenance free. Much smaller and lighter than conventional vacuum pumps.
- ROB-15100 ROBINAIR SINGLE STAGE PUMP R-12- $395.00
- The most popular vacuum pump for small service applications, including passenger cars and light duty trucks. Rated at 1.2 CFM with a rotary vane design, direct-drive 110/115-volt 1/8 HP motor. pulls vacuum down to 200 microns.
- ROB-15234 1.2 CFM TWO STAGE PUMP FOR R-134A AND R-12 SYSTEMS- $470.48
- same capacity as ROB-15100
- ROB-15200 ROBINAIR TWO-STAG PUMP R-12- $425.19
- For servicing passenger cars and light duty trucks. Pulls down to 50 microns, cleaning the system of air and moisture more completely and quickly than any single stage pump. Features include a 1.2 CFM offset rotary vane design pump for deeper vacuum and powerful compression, integral check valve that prevents pump oil from being sucked into the system if power is lost during evacuation, and 1/8 HP 115-volt motor.
- ROB-15434 ROBINAIR HIGH PERFORMANCE VACUUM MASTER(R) PUMP FOR R-12 AND R-134A SYSTEMS- $526.19
- two-stage 4 CFM pump with offset rotary vane design is ideal for high-production shops, fleets, buses and refrigerated trailers. Pulls vacuum down to 20 microns. Features a heay duty 1/3 HP 115 volt motor, and a special valve that isolates the pump from the system after evacuation is complete. UL listed.
- ROB-13203 ROBINAIR VACUUM PUMP OIL/OUART- $6.63
- Maintains maximum viscosity at high running temperatures. Improves cold weather starts.
- ROB-15195 ROBINAIR INLET FITTING- $12.59
- This will convert ROB-15100/15200 series vacuum pumps from R12 only to R12 plus R134A.
- ATD-3592 ATD 1.5 CFM VACUUM PUMP (2 STAGE)
- This lightweight & easy to store vacuum pump (12lbs.) is ideal for less than 3 ib. capacity evacuation. The inlet ports include 1/4" flare & 1/2" ACME (for automotive R134a systems)
- ATD-3618 ATD 2 CFM VACUUM PUMP (SINGLE STAGE)
- This lightweight & easy to store vacuum pump (12lbs.) is ideal for smaller systems (less than 3 lbs. of charge capacity). The inlet ports include 1/4" flare & 1/2" ACME (for automotive R134a systems).
- ATD-3617 ATD 5 CFM VACUUM PUMP (SINGLE STAGE)
- This model is an excellent choice for small to medium sized systems (2.5 lb. to 10 lb. charge capacity) This 2 stage pump features a manifold valve to isolate it from the system & 3 inlet ports include: 3/8" flare & 1/2" ACME (for automotive R134a systems).
- ATD-31510 R134a CHARGING CYLINDER
- Charges refrigerant quickly and accurately without running the A/C system. Thermostatically controlled 200 watt heater maintains constant temperature and pressure and eliminates the need for ambient temperature. 3 lb. per minute charging rate. 200-watt thermo-statically controlled heater with charge ready light. solid cast alumimun base. Measures in pounds/ounces and grams. 5 lb capacity.
- ATD-3586 ATD AIR CONTANT ANALYZER
- Simple accurate way to check R12 & R134a for air content. Identifies air in refrigerant as excess presure.
- Back To The Top Of The Page
VACUUM PUMPS
- ADT-3527 R134A BRASS MANIFOLD GAUGE SET- $195.83
- Brass forged body for extremely durability. Silicone anti-fluttermgauges give smooth
pressure readings. Double O-ring seals for smooth actions valves. Includes 72" hoses
with compact manual couplers.
ALUMINUM BLOCK GAUGE SETS
- Extruded aluminum block is extremely durable. Sight glass for visual check of refrigerant flow. Extra fitting allows switch-over from evacuation to recharge without purging supply lines. Piston type free floating valves for smooth operation. ATD-3523($211.24) ATD GAUGE SET with 72" hoses with compact manual couplers. ATD-3526($238.10) ATD GAUGE SET with 72" hoses with Snap-N-Seal couplers.
- ROB-40134A ROBINAIR SIDE WHEEL MANIFOLD GAUGE SET- $252.70
- Set includes three 72" color coded Enviro-Guard(R) hoses with high and low side field service couplers.
- ATD-3671 ATD R134a BRASS MANIFOLD GAUGE SET
- Heavy duty 2-1/2" vibration free gauges. Auto shut-off valves. Three charging hoses (60" yellow, 36" blue & red ) 500/2500 PSI. Low & high side R134a couplers. Hose meets EPA requriments.
- ATD-3672 ATD R134a ALUMINUM MANIFOLD GAUGE SET
- Heavy duty aluminum manifold with sight glass. Heavy duty vibration free gauges. Auto shut-off valves. Three 60" charging hoses: yellow, blue & red (500/2500 PSI). Low & high side R134a couplers. Hose meets EPA requirements.
- Back To The Top Of The Page
MANIFOLD GAUGE SETS - R134A
- ATD-3201 ATD R12 MANIFOLD GAUGE SET- $60.21
- The basic diagnostic and service tool used by air conditioning specialists. Three 36" color coded hoses, high and low pressure gauges, manifold block, hand shut-off valves.
- ROB-41620 ROBINAIR SIDE WHEEL MANIFOLD GAUGE SET- $97.00
- Includes three 72" color coded hoses with standard fittings.
- ROB-41630 ROBINAIR DELUXE SIDE WHEEL MANIFOLD GAUGE SET- $131.65
- Includes protective holster around gauges, three color coded 72" hoses with Quick Seal(tm) fittings.
- ATD-3670 ATD R12 BRASS MANIFOLD GAUGE SET
- Heavy duty vibration free gauges. Three 60" yellow, blue, red charging hoses (500/2500 PSI). Hose meets EPA requirements.
- Back To The Top Of The Page
MANIFOLD GAUGE SETS - R12
- HALOGEN LEAK DETECTORS
- TIF PUMP STYLE AUTOMATIC HALOGEN LEAK DETECTORS
- These two halogen leak detectors have enhanced electronic circuitry which provides the ability to detect a multitude of gasses. A simple flip of a switch will program tests to detect HFC (134a), CFC or HCFC gasses. Will find leaks even in the most contaminated atmospheres. Uses 2 C-cell alkaline batteries. Will detect leaks as small as .40 ounces per year. Probe attached with 36" coiled cord for reaching hard to reach areas. 5-6 seconds for warm-up. Operating temperatures 30 - 100 degrees. Made in the U.S.A. UL classified. One year warranty. TIF-5550($199.95), halogen leak detector, TIF-5650($219.95) halogen leak detector with LED and reset button.
- ATD REFRIGERANT LEAK DETECTORS
- ATD-31080 ATD ELECTRONIC HALOGEN LEAK DETECTOR- 240.67
- The most sensitive tester in the market, today, capable of detecting both freon and 134a. Manual calibration allows this tester to find leaks as small as 1/2 ounce per year, as well as large leaks in areas where background contamination may be present. Battery operated (4 AA batteries included) with variable frequency audio and visual alarm signal that gives indication of leak size. Unique single-part sensing tip is cleanable and not adversely affected by large amounts of halogen refrigerant. Comes with earphone, spare sensing tip and durable carrying case. UL SAE STD J1627.
- ATD-31090 ATD COMPACT ELECTRONIC HALOGEN LEAK DETECTOR- $173.33
- Can fit into tight engine compartments unlike any other. And it's the most affordable. Features a LOPER circuit that senses gas leaks (up to 1/2 ounce per year) of all CFC and HCFC, including R-134a. Powered by one 9-volt battery (not included) and it's on/off adjustment knob allows the user to single-handedly turn on and adjust the unit in seconds. Instantaneous response, recovery and warm-up times. UL SAE STD J1627. ATD-31091 optional 6" probe for ATD-31090.
- ROB-16500 ROBINAIR ELECTRONIC LEAK DETECTOR- 237.12
- The leak detector has an LED to show visually a leak of freon. It has a refrigerant selection switch as well as a volume control and a 16" flexible probe with specially designed sensing tip. It comes with a protective holster and resets. UL SAE STD J1627.
- TIF-5750AK TIF INSTRUMENTS COMBINATION A/C KIT- $449.95
- This a/c kit contains the Super-Scanner(tm) halogen leak detector and the 4500A 2-way dry HFC manifold gauge set for R134a. It includes three 72" color coded barrier hoses with 1/2" fittings: 2 C-cell batteries and a blow molded case.
- Back To The Top Of The Page
AIR CONDITIONING LEAK DETECTORS
- TRACER PRODUCTS FLUORO-LITE(R) MASTER KITS
- These kits contain one TP3880 A?C die injector, twelve one ounce bottles of A/C dye, UV absorbing spectacles and plastic storage case along with your choice of lamps. Made in U.S.A.
- TPD-TP1290 Fluoro-Lite(R) MASTER KIT- $421.90
- with TP1200A, 120 watt, 115 volts lamp with 20' cord cigarette lighter plug, 1' adapter cord with alligator clips, a 12' extension cord and UV absorbing spectacles. Optimum operating distance for lamp is 10"-18". Instant on lamp is safer to use. No warm up or cool down needed.
- TRACER PRODUCTS TRACER-STICK tm/DYE-LITE(r) MASTER KITS
- These kits contain two control valves, one quick coupler, six A/C Tracer Stick(tm) capsules, eight gasoline engine oil dye, two TAD/power steering dye, two engine coolant dye and UV absorbing spectacles in a plastic storage case along with your choice of lamps. Made in U.S.A.
- TPD-TP1280 TRACER-STICK tm/DYE-LITE(r) MASTER KITS- $400.00
- With TP1200A, 120 watt, 115 volt lamp with 20' cord. Has an optimum operating distance of 20'.
- TPD-TP1580 TRACER-STICK tm/DYE-LITE(r) MASTER KITS- $320.95
- With TP1500, 50 watt, 12 volt lamp. Lamp has a 4' cord with cigarette lighter plug, 1' adapter cord with alligator clips and a 12' extension cord. Optimum operating distance of 10" - 18" with this instant on lamp that requires no warm up or cool down for faster and safer use.
- TPD-TP1680 TRACER-STICK tm/DYE MASTER KIT- $480.00
- With TP1600 super high intensity, 150 watt, 115 volt self ballasted bulb with an 8' cord.
- TPD-TP1780 TRACER-STICK tm/DYE MASTER KIT- $337.00
- With TP1700 50 watt, 12 volt halogen flashlight style lamp. Includes a 4' cord with cigarette lighter plug, 1' adapter cord with alligator clips and a 12' extension cord. This is an instant on lamp which requires no warm up or cool down for safer and faster operation. Optimum operating distance is 10" - 18".
- Back To The Top Of The Page
TRACER PRODUCTS A/C LEAK DETECTOR KITS
- TPD-TP1200A INTENSITY UV LAMP- $245.72
- This has a self ballasted 120w, 115V bulb and 20' cord, filter protector/lamp stand and UV absorbing spectacles. UL listed.
- TPD-TP1500 MEDIUM INTENSITY UV LAMP- $175.00
- Lamp is a 12V instant-on 50W bulb with a 4' cord and cigarette lighter plug, 1' adapter cord with alligator clips, 12' extension cord, UV absorbing spectacles and a filter protector/lamp stand. UL listed. CSA approved.
- TPD-TP1600 SUPER HIGH INTENSITY UV LAMP- $319.00
- This 115V self ballasted lamp has 150 watts, an 8' cord, UV absorbing spectacles and a heat guard/lamp stand. UL listed. CSA approved.
- TPD-TP1700 12 VOLT FLASHLIGHT STYLE UV LAMP- $175.00
- This 50 watt lamp features instant on. No warm up or cool down. Safer for operator. Includes 4' cord with cigarette lighter plug, 1' adapter cord and UV absorbing spectacles. UL listed.
- LEAK DETECTION DYES
- Gasoline, diesel, ATF/power steering, fuel system, R12 refrigerant, engine coolant, mineral oil systems.
- Back To The Top Of The Page
LEAK DETECTION LAMPS
- ROB-18019 ROBINAIR REPLACEMENT PARTS KIT- $88.63
- An assortment of 80 of the most common parts used in servicing manifolds and certain other A?C equipment includes stems, valve core depressors, Quick Seal(tm) caps, gasket adapters, hose gaskets, valve cores, )-rings, side wheels and a valve core remover/installer. Packed in a plastic organizer box.
- ATD ADAPTERS AND ANTI BLOWBACK KITS
- Universal A/C sets, safety A/C sets, specialty adapter sets. Anti-blowback R12 kits, GM/Ford Quick disconnect R12 kits. Universal A/C R12 adapter sets. Safety A/C R12 adapter sets. A/C retrofit adapter assortment kits.
- Back To The Top Of The Page
ANTI-BLOWBACK ADAPTERS
Solid brass adapters automatically seal off the hose, reducing loss of refrigerant and preventing mechanic finger burn. ROB-1023A($10.15) 1/4" MFL to 1/4" FFL, ROB-10242($27.24) 1/4" MFL to 3/16" MFL.
- FORD A/C AND FUEL LINE SPRING LOCK COUPLING TOOL
- Releases locking mechanism on all four sizes of Ford fuel and air conditioning line spring couplings:3/4", 5/8", 1/2" and 3/8".
- OTC-7238 OTC A/C SPRING LOCK COUPLING TOOLS- $28.95
- For separating the new spring lock air conditioning couplings on 1981 thru current Ford vehicles. They provide the only means of separating air conditioning refrigerant pressure lines on these vehicles. Fit 3/8", 1/2", 5/8" and 3/4" couplings.
- ATD-3554 ATD A/C SPRING LOCK COUPLING TOOL KIT- $13.48
- Use on late model Fords & some Chryslers. ATD-3570 3/8", ATD-3571 1/2", ATD-3572 5/8", ATD-3573 3/4".
- LIS-37000 LISLE A/C COUPLING DISCONNECT TOOL SET - $9.95
- This set quickly and easily disconnects spring lock couplings on Ford and Chryslers A/C lines. Set services 5/16", 3/8", 1/2"., 5/8", 3/4", 7/8".
- ATD-3376 ATD SCHRADER VALVE CORE TOOL- $11.05
- Quickly removes valve core, storage area in head includes 6 cores.
- ATD-3555 ATD UNIVERSAL VALVE CORE REMOVER- $8.00
- Doubled ended for easy replacement of standard and GM large bore valve core.
- ATD-3519 THREAD REPAIR TOOL- $12.45
- Recuts stripped R12 service port threads. All-in-one design for 1/8", 3/16" and 1/4" service ports. An excellent retrofit tool, it will ensure that the R134a retrofit adapters will fit securely.
- ROB-14401 SIX-IN-ONE CONDENSER & EVAPORATOR FIN STRAIGHTNER- $11.08
- ATD-3503 ATD R134A SAFETY CAN TOPPER- $13.93
- 90 MANUAL SHUT OFF VALVE
- ATD-3504($20.21) Hi side manifold anti-blowback. ATD-3505($19.47) Lo side manifold anti-blowback.
- ATD-3625 ATD VALVE CORE REMOVER/INSTALLER: ADAPTER 1/4" x 3/16"
- ATD-3602 ATD CONDENSER COMB
- Cleans and straightens condenser and evaporator fins. 6 sided head for 6, 8, 10, 14 and 15 fins per inch applications.
- ATD-3626 ATD R134a SERVICE PORT REAMER
- Deburrs and chamfers R134a service ports in one easy motion. Eliminates burrs which can nick or cut coupler O-rings and cause couplers to leak.
- ATD-3602 ATD CINDENSER FIN COMB
- Cleans and straightens condenser and evaporator fins. Six sided head for 6, 8, 10, 12, 14 and 15 fins per inch applications.
- ATD-3503 ATD R134a SAFETY CAN TOPPER
- Screw on design for R134a ACME male can taps. Gasket assures leak proof operation. Built -in safety check valve 1/2" ACME-M.
- ATD-3504 ATD HIGH SIDE MANIFOLD ANTI BLOW BACK
- Red 1/4" x 3/16".
- ATD-3505 ATD LOW SIDE MANIFOLD ANTI BLOW BACK
- Red 1/4" x 1/4".
- ATD-3603 ATD SYSTEM FLUSH KIT
- Uses shop air to propel flushing material. Works with any lightweight flushing material. includes flushgun, hose, canister and adapter.
- ATD-3619 ATD INLET TEE ADAPTER
- 1/4" FL-F x 1/2" ACME-M straight adapter.
- ATD-5539 ATD 6 PIECE DISCONNECT TOOL SET
- For use with most fuel lines, air conditioning lines, radiator and heater hoses. Strong, light and durable aluminum construction. Simple push on & pull off action.
- ATD-5532 ATD 2 PIECE OFFSET DISCONNECT SET
- Offset for those hard to reach areas, disconnects fuel & AC lines. Fits 5/16" & 3/8".
- ATD-5533 ATD 6 PIECE OFFSET DISCONNECT TOOL SET
- Offset for those hard to reach areas, disconnects fuel & AC lines. Fits 5/16", 1/2", 3/8", 5/8", 3/4", 7/8".
- ATD-3510 ATD ROTOR AND BEARING PILOT PULLER
- For R4 compressors.
- ATD-3415 ATD SEAL REMOVER & INSTALLER
- GM A6, late DA6, HR-6, V5.6 pole R4 seal remover/installer.
- ATD-3607 ATD HEAVY DUTY RATCHET HOSE CUTTER
- Ratcheted action makes this cutter extremely easy to operate resulting in quick, clean cuts. Cutting blade is made up of special alloy, heat treated steel for long life. Cuts all rubber hoses and PVC pipe up to 1-1/2" O.D. (not recommended for PVC200).
- ATD-3604 ATD HEAVY DUTY RATCHET HOSE CUTTER
- Extremely smooth driving action gets blade to tube quickly. High polished, triple chrome plating for corrosion resistance. Cutter includes retractable reamer/file & spare carbide cutting wheel. Carbide wheel cuts hard & soft copper aluminum, brass thin wall steel & stainless steel.
- Back To The Top Of The Page
SPRING LOCK COUPLING TOOLS
- ATD-3454 ATD GM CLUTCH PLATE REMOVER- $10.97
- Removes GM clutch plate on A6 compressors and 1976 or earlier R4 compressors.
- ATD-3499 ATD UNIVERSAL CLUTCH HOLDER WRENCH- $29.29
- Unique adjustable tip design handles all GM, Warner, Pitts and Ogura clutches.
- ATD-3458 ATD GM CLUTCH PLATE INSTALLER- $13.61
- New design, for on car use
- ATD-31002 ATD GM CCOT & FORD FFOT REMOVER- $13.31
- Removes GM cycling clutch orifice tube and Ford fixed orifice tube from inlet of evaporator.
- ATD-31110 ATD DELUXE CLUTCH PLATE REMOVAL AND INSTALATION- $83.07
- 16 piece set services all popular clutches, including GM, DA6, R4, A6, Kiki diesel, Ford FS6, Nippondenso, Import 8mm. Packed in handy plastic organizer case.
- ATD-3630 ATD DELUXE A/C CLUTCH HUB PULLER & INSTALLER KIT
- Kit contains a complete offering of A/C compressor clutch hub pullers & installers for GM, Ford, Chrysler & iports. Includes a compressor I.D. chart. Comes in a custom molded case.
- ATD-3499 ATD UNIVERSAL CLUTCH HOLDER WRENCH
- Holds clutch plate when removing or installing clutch hub.
- ATD-3621 GM CLUTCH PLATE INSTALLER
- Installs GM A6, late DA6, HR-6, V5, 6 pole R4 clutch plate.
- ATD-3609 GM & FORD ORIFICE TUBE REMOVER/INSTALLER
- For work on all GM (CCOT), Ford (FOTCC) and Aerostar Systems.
- ATD-3610 ATD CLUTCH PLATE REMOVER
- For use on Nippondenso type compressors appearing on many Fords, Chrysler and imported vehicles.
- ATD3612 ATD DA6 CLUTCH PLATE REMOVER
- For work on all GM (CCOT), Ford (FOTCC) and Aerostar Systems.
- ATD-3606 ATD FLARING, DOUBLE FLARING & CUTTING TOOL SET
- Heavy duty tube cutter, standard 45 degree flaring tool, and double flaring adapters set in custom carrying case. Heavy duty tube cutter for 1/8" tubing ; standard 45 degree flaring tool flares 7 sizes: 3/16", 1/4", 5/16", 3/8", 7/16", 1/2" and 5/8" O.D. tubing; five double flaring adapters cover 3/16", 1/4", 5/16", 3/8" and 1/2" O.D.
- ATD-3608 ATD ORIFICE TUBE REMOVER
- Gm ( CCOT) and Ford (FOTCC) screen extractor removes broken orifice tube screens from evaporator inlet.
- ATD-3613 ATD CLUTCH PLATE REMOVER
- Removes clutch plates on GM A6, R4, late DA6, HR-6, 6 pole R4.
- ATD-3614 ATD CLUTCH PLATE INSTALLER
- Installs clutch plates on Saden compressors.
- ATD-3616 ATD CLUTCH PLATE REMOVER ARBOR
- Used with ATD-3613 for removing clutch plates with threaded compressor shafts.
- ATD-3615 ATD UNIVERSAL PULLEY SET
- Puller arbor, pulley removal jaws, set of thumb screws and washers, GM pulley removal pilot, pulley hub removal pilot, puller body.
- ATD-3591 ATD ELECTRONIC REFRIGERANT SCALE
- The new "Accu-charge" electronic refrigerant scale is constructed of rugged die cast aluminum. The heavy duty 9" x 9" platform can be easily removed from the ABS case and carried to any convenient location. 15 minute auto-off function. Memory ability saves last weight when unit shuts off. 175lb. capacity (80kg.). 60 hour performance with one 9v alkaline battery. Heavy duty load cell has built-in overload protector. Rugged die cast aluminum construction. Reliable membrane keypad switches. Built-in low battery warning. Extra large LCD display lb/oz/kg. Display module can be placed on flat surface or hung. Reading may be zeroed out at anytime. Auto power off conserves battery. Rear compartment door slides out easily for battery change.
- ATD-3575 ATD PUSH CONNECT FLARING TOOL SET
- Fabricates push-connect flares found on transmission cooler, fuel and some brake lines. Hand operated hydraulic ram operates the power necessary to produce proper fitting ends. Includes custom carrying case.
- ATD-3578 ATD PUSH CONNECT FLARING TOOL, YOKE ASSEMBLY
- Not included with ATD-3575, but is available part for the set.
- ATD-3600 ATD 407 PIECE UNIVERSAL O-RING SET
- Set contains 407 assorted O-rings.
- ATD-3601 ATD 419 PIECE METRIC O-RING SET
- Set contains 419 assorted O-rings.
- ATD-356 ATD 270 PIECE HBNR O-RING ASSORTMENT KIT
- Set contains 270 assorted O-rings.
- ATD-901 ATD ALL PURPOSE RADIATOR HOSE CUTTER
- New compact design, may be used as a hand held or bench top hose cutter. Cuts easily and cleanly. Cuts touch hoses up to 2 1/2" (outside diameter). It cuts small hoses too. Light and durable aluminum construction. Replaceable alloy blade.
- Back To The Top Of The Page
CLUTCH SERVICE TOOLS
- ATD-3510($13.31) ROTOR AND BEARING PILOT PULLER FOR R4 COMPRESSORS
- For R4 compressors.
- ATD-3511($46.71) GM R4 ROTOR AND BEARING PULLER
- Jaws & universal puller body for use on GM R4 rotors
- ATD-3515($13.31) SEAL SEAT REMOVER
- For use on Nippondenso type compressors.
- ATD-3516($25.73) REVERSIBLE RATCHET WRENCH 1/2"+ 9/16" hex, 3/8"+ 1/4" square
- Steel forged wrench with reversible ratchet. 9/16", 1/2" hex, 1/4" and 3/16" square.
- ATD-3517($5.54) GM SEAL PROTECTORS
- For use on GM compressors.
- Back To The Top Of The Page
